Date: Mon, 26 Sep 2005 13:26:13 -0400 From: Tim Howe <tim.howe@celebrityresorts.com> To: freebsd-stable@freebsd.org Subject: Re: 5.3 -> 5.4 breaks ATA (Intel ICH2) Message-ID: <87ll1jzqoa.fsf@beaker.data-secure.net> In-Reply-To: <4335D1D2.9060501@leadhill.net> (Billy Newsom's message of "Sat, 24 Sep 2005 17:23:14 -0500") References: <87y85nuqhy.fsf@beaker.data-secure.net> <4335D1D2.9060501@leadhill.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-=-=
Billy Newsom <smartweb@leadhill.net> writes:
> Perhaps you could test one of those identical machines with a simple
> hard disk swap? Just put the bad booting drive in a working system and
> see if the error is still there?
I placed the drive into a Dell Optiplex GX270 with an Intel ICH5, which
worked with no trouble. The dmesg from this boot is attached as
dmesg.boot.54RC2.ICH5. One note is that my workstation was slightly
less up-to-date than I thought. I'm building 5-STABLE for it currently
and I'll follow up if the new kernel fails to see the drive, although my
hunch is that it's the controller.
> Can you post your dmesg for 5.3 perhaps?
Attached as dmesg.boot.53.ICH2.
I also booted the machine with the 5-STABLE I built for it last night,
and the relevant dmesg (transcribed from the screen) from that boot is
attached at dmesg.excerpt.5STABLE.ICH2.
The only obvious difference that I noticed is these lines:
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
When booting 5.3-RELEASE with the -v option, I see quite a few of these
lines. The code returned varies occasionally. With 5.4 and 5-STABLE,
only 7 of these lines are displayed.
I wonder if in my case the problem is either:
* The drive or the controller (not quite up on all the inner workings
of ATA) is taking too long to return, and 5.4 doesn't wait as long
before giving up as 5.3 did.
* These are errors, and 5.4 allows less of them before giving up than
5.3 did.
--
Tim Howe
Software Engineer
Celebrity Resorts, Inc.
--=-=-=
Content-Disposition: inline; filename=dmesg.boot.54RC2.ICH5
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL GX270 > on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000050
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00feae0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 14 15
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 14 15
embedded 1 12 A 0x62 3 4 5 6 7 9 10 11 14 15
slot 1 1 7 A 0x60 3 4 5 6 7 9 10 11 14 15
slot 1 1 7 B 0x61 3 4 5 6 7 9 10 11 14 15
slot 1 1 7 C 0x62 3 4 5 6 7 9 10 11 14 15
slot 1 1 7 D 0x63 3 4 5 6 7 9 10 11 14 15
slot 2 1 8 A 0x61 3 4 5 6 7 9 10 11 14 15
slot 2 1 8 B 0x62 3 4 5 6 7 9 10 11 14 15
slot 2 1 8 C 0x63 3 4 5 6 7 9 10 11 14 15
slot 2 1 8 D 0x60 3 4 5 6 7 9 10 11 14 15
slot 3 1 9 A 0x62 3 4 5 6 7 9 10 11 14 15
slot 3 1 9 B 0x63 3 4 5 6 7 9 10 11 14 15
slot 3 1 9 C 0x60 3 4 5 6 7 9 10 11 14 15
slot 3 1 9 D 0x61 3 4 5 6 7 9 10 11 14 15
slot 4 1 10 A 0x63 3 4 5 6 7 9 10 11 14 15
slot 4 1 10 B 0x60 3 4 5 6 7 9 10 11 14 15
slot 4 1 10 C 0x61 3 4 5 6 7 9 10 11 14 15
slot 4 1 10 D 0x62 3 4 5 6 7 9 10 11 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x8086, dev=0x2570, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 1, range 32, base feb80000, size 19, enabled
map[18]: type 4, range 32, base 0000ed98, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2572, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 1 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000ff80, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 0000ff60, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[20]: type 4, range 32, base 0000ff40, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
map[20]: type 4, range 32, base 0000ff20, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24de, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 1, range 32, base ffa80800, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
map[10]: type 4, range 32, base 0000fe00, size 3, enabled
map[14]: type 4, range 32, base 0000fe10, size 2, enabled
map[18]: type 4, range 32, base 0000fe20, size 3, enabled
map[1c]: type 4, range 32, base 0000fe30, size 2, enabled
map[20]: type 4, range 32, base 0000fea0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d1, revid=0x02
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
map[20]: type 4, range 32, base 0000eda0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
map[10]: type 4, range 32, base 0000ee00, size 8, enabled
map[14]: type 4, range 32, base 0000edc0, size 6, enabled
map[18]: type 1, range 32, base feb7fa00, size 9, enabled
map[1c]: type 1, range 32, base feb7f900, size 8, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d5, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xed98-0xed9f mem 0xfeb80000-0xfebfffff,0xe8000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xfeb80000
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff60
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff40
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff20
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfea00000-0xfeafffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base feae0000, size 17, enabled
pcib1: device (null) requested decoded memory range 0xfeae0000-0xfeafffff
map[18]: type 4, range 32, base 0000df40, size 6, enabled
pcib1: device (null) requested decoded I/O range 0xdf40-0xdf7f
pcib1: matched entry for 1.12.INTA
pcib1: slot 12 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x100e, revid=0x02
bus=1, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdf40-0xdf7f mem 0xfeae0000-0xfeafffff irq 18 at device 12.0 on pci1
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeae0000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xdf40
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:0d:56:05:e0:8a
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfea0
atapci1: [MPSAFE]
ata2: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe10
ata2: reset tp1 mask=00 ostat0=ff ostat1=ff
ata2: [MPSAFE]
ata3: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfe20
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfe30
ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xedc0-0xedff,0xee00-0xeeff mem 0xfeb7f900-0xfeb7f9ff,0xfeb7fa00-0xfeb7fbff irq 17 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xfeb7fa00
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xfeb7f900
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: sndbuf_setmap 3e106000, 4000; 0xece00000 -> 3e106000
pcm0: sndbuf_setmap 3e100000, 4000; 0xece04000 -> 3e100000
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0xc001 0xc011 0xc001 0xc001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
ahc_isa_probe 0: ioport 0xc00 alloc failed
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xca800-0xcbfff,0xc0000-0xca7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc083 0xc083 0xc083 0xc083
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
umass0: Kodak Multi-Card R-W, rev 1.10/1.00, addr 2
umass0:0:0:-1: Attached to scbus0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2194655848 Hz quality 800
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ata0-master: setting PIO4 on Intel ICH5 chip
ata0-master: setting UDMA100 on Intel ICH5 chip
ata0-slave: setting PIO4 on Intel ICH5 chip
ata0-slave: setting WDMA2 on Intel ICH5 chip
ad0: <Maxtor 6E040L0/NAR61590> ATA-7 disk at ata0-master
ad0: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ad1: <WDC AC32500H/10.07H09> ATA-0 disk at ata0-slave
ad1: 2441MB (4999680 sectors), 4960 C, 16 H, 63 S, 512 B
ad1: 1 secs/int, 1 depth queue, WDMA2
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH5 chip
ata1-slave: setting PIO4 on Intel ICH5 chip
acd0: <Lite-On LTN486S 48x Max/YDS6> CDROM drive at ata1 as master
acd0: read 8268KB/s (8268KB/s), 120KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <SAMSUNG CD-R/RW SW-248F/R602> CDRW drive at ata1 as slave
acd1: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, PIO4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
pcm0: measured ac97 link rate at 48013 Hz, will use 48000 Hz
GEOM: new disk ad0
GEOM: new disk ad1
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:80292807
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 41109917184 end 41109949439
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:4999617
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 2559803904 end 2559836159
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 2147483648 end 2415919103
GEOM: Configure ad0s1c, start 0 length 41109917184 end 41109917183
GEOM: Configure ad0s1d, start 2415919104 length 4294967296 end 6710886399
GEOM: Configure ad0s1e, start 6710886400 length 3221225472 end 9932111871
GEOM: Configure ad0s1f, start 9932111872 length 31177805312 end 41109917183
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad1s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad1s1b, start 268435456 length 510066688 end 778502143
GEOM: Configure ad1s1c, start 0 length 2559803904 end 2559803903
GEOM: Configure ad1s1d, start 778502144 length 268435456 end 1046937599
GEOM: Configure ad1s1e, start 1046937600 length 268435456 end 1315373055
GEOM: Configure ad1s1f, start 1315373056 length 1244430848 end 2559803903
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Kodak CF/SD/MMC/SM 0108> Removable Direct Access SCSI-0 device
pass0: Serial Number \^_
pass0: 1.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <Kodak CF/SD/MMC/SM 0108> Removable Direct Access SCSI-0 device
pass1: Serial Number \^_
pass1: 1.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <Kodak CF/SD/MMC/SM 0108> Removable Direct Access SCSI-0 device
pass2: Serial Number \^_
pass2: 1.000MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kodak CF/SD/MMC/SM 0108> Removable Direct Access SCSI-0 device
da0: Serial Number \^_
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Kodak CF/SD/MMC/SM 0108> Removable Direct Access SCSI-0 device
da1: Serial Number \^_
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Kodak CF/SD/MMC/SM 0108> Removable Direct Access SCSI-0 device
da2: Serial Number \^_
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
linprocfs registered
em0: Link is up 100 Mbps Half Duplex
--=-=-=
Content-Disposition: inline; filename=dmesg.boot.53.ICH2
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x244b, revid=0x02
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ef40, size 5, enabled
$PIR: 0:31 INTD routed to irq 3
found-> vendor=0x8086, dev=0x2442, revid=0x02
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=3
map[20]: type 4, range 32, base 0000efa0, size 4, enabled
$PIR: 0:31 INTB routed to irq 10
found-> vendor=0x8086, dev=0x2443, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000ef80, size 5, enabled
$PIR: 0:31 INTC routed to irq 9
found-> vendor=0x8086, dev=0x2444, revid=0x02
bus=0, slot=31, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 36M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfc900000-0xfe9fffff
pcib1: prefetched decode 0xf0600000-0xf46fffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xfd000000-0xfdffffff
map[14]: type 3, range 32, base f2000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xf2000000-0xf3ffffff
$PIR: Found IRQ 3 for link 0x60 from 3 9 10
$PIR: 0:1 INTA routed to irq 3
pcib1: slot 0 INTA is routed to irq 3
found-> vendor=0x10de, dev=0x002d, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=3
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: prefetched decode 0xf4700000-0xf47fffff
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000df00, size 6, enabled
pcib2: device (null) requested decoded I/O range 0xdf00-0xdf3f
$PIR: No matching entry for 0.30.INTC
found-> vendor=0x1274, dev=0x1371, revid=0x09
bus=2, slot=10, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d800, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xd800-0xd8ff
map[14]: type 1, range 32, base feaffc00, size 10, enabled
pcib2: device (null) requested decoded memory range 0xfeaffc00-0xfeafffff
$PIR: No matching entry for 0.30.INTD
found-> vendor=0x1317, dev=0x0985, revid=0x11
bus=2, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci2: <multimedia, audio> at device 10.0 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0xd800-0xd8ff mem 0xfeaffc00-0xfeafffff irq 9 at device 11.0 on pci2
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000895, model 0x0001, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:04:5a:5c:a2:d3
dc0: if_start running deferred for Giant
dc0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0x50 err=0x81 lsb=0x00 msb=0x00
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 stat0=50 stat1=01 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 3 at device 31.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef40
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 9 at device 31.4 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef80
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 20 devices, largest 242 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xffe0000-0xfff7fff, size=0x18000
PNP0c01: adding fixed memory32 range 0xfff8000-0xfffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xffc0000-0xffdffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0x100000-0xffbffff, size=0xfec0000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x22-0x2d, size=0xc, align=0x1
PNP0c02: adding io range 0x30-0x3f, size=0x10, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1
PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1
PNP0c02: adding io range 0x400-0x47f, size=0x80, align=0x1
PNP0c02: adding io range 0x540-0x54f, size=0x10, align=0x1
PNP0c02: adding io range 0x500-0x53f, size=0x40, align=0x1
PNP0c02: adding io range 0x884-0x885, size=0x2, align=0x1
pnpbios: handle 9 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb00000-0xffbfffff, size=0x100000
pnpbios: handle 10 device ID INT0800 (0008d425)
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
pnpbios: handle 12 device ID PNP0c02 (020cd041)
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 17 device ID PNP0700 (0007d041)
pnpbios: handle 18 device ID PNP0c02 (020cd041)
pnpbios: handle 19 device ID PNP0a03 (030ad041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <INT0800> failed to probe at iomem 0xffb00000-0xffbfffff on isa0
adv1: Invalid baseport of 0x800 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 996681694 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata0-master: setting PIO4 on Intel ICH2 chip
ata0-master: setting WDMA2 on Intel ICH2 chip
ad0: <WDC AC32500H/10.07H09> ATA-0 disk at ata0-master
ad0: 2441MB (4999680 sectors), 4960 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, WDMA2
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH2 chip
ata1-master: setting UDMA33 on Intel ICH2 chip
acd0: <CRD-8483B/1.06> CDROM drive at ata1 as master
acd0: read 8250KB/s (8250KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:4999617
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 2559803904 end 2559836159
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 510066688 end 778502143
GEOM: Configure ad0s1c, start 0 length 2559803904 end 2559803903
GEOM: Configure ad0s1d, start 778502144 length 268435456 end 1046937599
GEOM: Configure ad0s1e, start 1046937600 length 268435456 end 1315373055
GEOM: Configure ad0s1f, start 1315373056 length 1244430848 end 2559803903
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
--=-=-=
Content-Disposition: inline; filename=dmesg.excerpt.5STABLE.ICH2
5.4-RELEASE-p3
...
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd2 err=0xd2 lsb=0xd2 msb=0xd2
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: reset tp2 stat0=d0 stat1=d0 devices=0x0
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
...
--=-=-=--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?87ll1jzqoa.fsf>