Date: Fri, 17 Nov 2000 14:10:21 -0700 (MST) From: Steve Grandi <grandi@noao.edu> To: Rich Winkel <rich@pencil.math.missouri.edu> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: ASUS CUR-DLS motherboard? (gateway 7400 server) Message-ID: <Pine.LNX.4.10.10011171356490.7526-100000@mirfak.tuc.noao.edu> In-Reply-To: <200011161902.NAA60989@pencil.math.missouri.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
I installed Stable on a Gateway 6400 which also uses the Asus CUR-DLS
board. Works fine! All the built-in devices work right out of the box.
For your amusement, here is the output from dmesg:
FreeBSD 4.2-BETA #0: Wed Nov 8 12:30:14 MST 2000
grandi@ndws.tuc.noao.edu:/usr/obj/usr/src/sys/NDWS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (866.70-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1140785152 (1114048K bytes)
avail memory = 1105539072 (1079628K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
IOAPIC #1 intpin 4 -> irq 5
IOAPIC #1 intpin 8 -> irq 9
IOAPIC #1 intpin 9 -> irq 2
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc0350000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035009c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafd000-0xfeafdfff irq 5 at device 2.0 on pci0
fxp0: Ethernet address 00:e0:18:02:76:62
pci0: <ATI Mach64-GR graphics accelerator> at 7.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> at 15.2 irq 10
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
sym0: <1010-33> port 0xe400-0xe4ff mem 0xfebfa000-0xfebfbfff,0xfebff800-0xfebffbff irq 9 at device 5.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <1010-33> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfdfff,0xfebffc00-0xfebfffff irq 2 at device 5.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
acd0: CDROM <CRD-8483B> at ata1-master using PIO4
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
Mounting root from ufs:/dev/da0s1a
da0 at sym0 bus 0 target 0 lun 0
da0: <FUJITSU MAH3182MP 0109> Fixed Direct Access SCSI-4 device
da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled
da0: 17432MB (35701260 512 byte sectors: 255H 63S/T 2222C)
da1 at sym1 bus 0 target 0 lun 0
da1: <SEAGATE ST173404LW 0002> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled
da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
On Thu, 16 Nov 2000, Rich Winkel wrote:
> We're considering getting this machine to run freebsd. Can anyone vouch
> for it?
>
> Thanks!
> Rich
>
--
Steve Grandi
National Optical Astronomy Observatory/AURA Inc., Tucson AZ USA
Internet: grandi@noao.edu Voice: +1 520 318-8228 FAX: +1 520 318-8360
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.10011171356490.7526-100000>