Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 15 Aug 2009 21:39:13 GMT
From:      Jaromír Cápík <tavvva@seznam.cz>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   kern/137806: USB keyboard doesn't work until it's unplugged 
Message-ID:  <200908152139.n7FLdDlP078634@www.freebsd.org>
Resent-Message-ID: <200908152140.n7FLe7BK063581@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         137806
>Category:       kern
>Synopsis:       USB keyboard doesn't work until it's unplugged
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Aug 15 21:40:06 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Jaromír Cápík
>Release:        7.2
>Organization:
>Environment:
FreeBSD TavvvaWS.tavvva.local 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1 07:18:07 UTC 2009     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  amd64

>Description:
Hello.

According to the attached dmesg output it looks like the USB keyboard is not detected until it is unplugged and plugged again (last 3 lines of the dmesg output).


>How-To-Repeat:
not sure ... probably HW related
>Fix:


Patch attached with submission follows:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May  1 07:18:07 UTC 2009
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (2333.34-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 2133303296 (2034 MB)
avail memory  = 2056949760 (1961 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xf4000000-0xf4ffffff,0xe0000000-0xefffffff,0xf5000000-0xf5ffffff irq 16 at device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe100-0xe11f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xe500-0xe51f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc101000-0xfc1013ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on uhub3
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
ugen0: <ISSC ISSCEDRBTA, class 224/1, rev 2.00/3.73, addr 3> on uhub4
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port 0xb000-0xb007,0xb100-0xb103,0xb200-0xb207,0xb300-0xb303,0xb400-0xb40f mem 0xfc000000-0xfc001fff irq 19 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf8000000-0xf8000fff irq 16 at device 0.0 on pci4
re0: Using 1 MSI messages
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1a:4d:5d:29:68
re0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xe200-0xe21f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub5: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xe300-0xe31f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub6: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xe400-0xe41f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub7: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub7: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfc100000-0xfc1003ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub8: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub8: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <multimedia, video> at device 0.0 (no driver attached)
pci5: <multimedia> at device 0.1 (no driver attached)
pci5: <multimedia> at device 0.2 (no driver attached)
pci5: <multimedia, audio> at device 2.0 (no driver attached)
pci5: <input device> at device 2.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f,0xfc00-0xfc0f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xe700-0xe707,0xe800-0xe803,0xe900-0xe907,0xea00-0xea03,0xeb00-0xeb0f,0xec00-0xec0f irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 72a072a0600072a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad1: 953868MB <Hitachi HDT721010SLA360 ST6OA3AA> at ata0-slave SATA300
acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata4-slave UDMA33
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad1s2 is ufsid/4a86832a6858684a.
GEOM_LABEL: Label for provider ad1s3 is ufsid/4a86dea10dfcdbcc.
GEOM_LABEL: Label for provider ad1s5 is ext2fs/Mandriva.
GEOM_LABEL: Label for provider ad1s7 is ext2fs/Data.
GEOM_LABEL: Label for provider ad1s8 is ext2fs/Xubuntu.
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/ad1s3a
GEOM_LABEL: Label ufsid/4a86dea10dfcdbcc removed.
GEOM_LABEL: Label for provider ad1s3 is ufsid/4a86dea10dfcdbcc.
GEOM_LABEL: Label ufsid/4a86dea10dfcdbcc removed.
re0: link state changed to UP
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub2
kbd2 at ukbd0
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub2


>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200908152139.n7FLdDlP078634>