Date: Sat, 03 Nov 2007 18:38:25 -0400 From: "Aryeh M. Friedman" <aryeh.friedman@gmail.com> To: "Sean C. Farley" <scf@FreeBSD.org> Cc: freebsd-current@FreeBSD.org, samira <samira.nox@gmail.com> Subject: Re: sata atapi on ich9r Message-ID: <472CF861.3020609@gmail.com> In-Reply-To: <alpine.BSF.0.9999.0711032001430.3377@thor.farley.org> References: <op.t07skxg4godk2w@localhost> <472C3569.3050301@gmail.com> <alpine.BSF.0.9999.0711030941540.3377@thor.farley.org> <472CD0CF.1020909@gmail.com> <alpine.BSF.0.9999.0711032001430.3377@thor.farley.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Sean C. Farley wrote: > On Sat, 3 Nov 2007, Aryeh M. Friedman wrote: > > *snip* > >> Later tonight I am going to set up an informal clearinghouse list/wiki >> for this issue so we can be more systematic about it. > > That sounds good. In the process of doing that right now will publicly announce it when complete. > >>> My system is an Asus P5K-E/WiFi with a DVDR <LITE-ON DVDRW >>> LH-20A1S/9L08>. It has 4GB RAM and two SATA hard drives. I have no >>> PATA drives in it. It is running in RAID mode. >> >> I assume amd64 right? > > No. i386 (w/o PAE) since I am using the nVidia driver. I also have > memory mapping disabled else the system will panic with that driver. I > am only able to access 3GB. What kind of board (I blew out a 8500 GS attempting the same thing so I am no using a 5200 GT under nv)? BTW after we fix these IHC9R (SATA only?) issues I was thinking of tackling nvidia's kernel request list intrested in that project also? > > >>> 2. sysinstall will fail during install when copying GENERIC kernel. >>> This was on my work computer in a Dell Optiplex 745 with 1GB RAM. >>> atapci0: <Intel ICH8 SATA300 controller> >>> acd0: CDRW <HL-DT-ST CD-RW/DVD-ROM GCC-H10N/C103> at ata3-master >>> SATA150 >> >> Like I asked the other person what is the actual performence of acd0 >> (150 or 300)? > > The specification for my LITE-ON drive does not say anything but SATA, > so I assume SATA150. The Dell drive is a CD burner/DVD drive. I really > doubt it could be 300. atacontrol list shows both DVD drives to be > "Serial ATA v1.0". For some reason I wasn't even aware of atacontrol ;-) > > My drives at home are definitely 150. At work my WDC WD800JD shows up > as 150 although it is a 300. Same issue so we should add it to the issue list > >>> 5. PATA is not related since I have no PATA drives in my computer. >> >> Ideally I should see the following on my machine (bios sees it) but >> the above dmesg snip shows I don't: >> >> 500 GB HDD SATA/300 >> OEM DVDR,-RW,+R SATA/300 >> 250 GB HDD PATA UDMA/133 (I have an other 250 GB I want to install as >> soon this one is reconized) > > Does it change depending on how you have SATA configured (IDE/RAID/AHCI) > in the BIOS? After I am done setting up the wiki I am going to open the box up and play around with stuff so will report then
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?472CF861.3020609>