Date: Fri, 10 Dec 1999 14:56:25 -0500 (EST) From: Kenneth Culver <culverk@culverk.student.umd.edu> To: freebsd-current@freebsd.org Subject: SB ViBRA16X Message-ID: <Pine.BSF.4.20.9912101449330.2592-100000@culverk.student.umd.edu>
next in thread | raw e-mail | index | archive | help
I have checked the mailing list archives and havn't been able to find
anything on this so here goes:
I have a SoundBlaster ViBRA16X, and a Diamond SupraExpress 56i modem. The
SoundBlaster worked fine with PnP OS turned off in Bios, as did the
modem. They were detected as non PnP devices by FreeBSD. With the recent
changes (controller pnp0 is no longer an option) Neither of these devices
works correctly. The Soundcard is detected ok, but it won't play any sound
through /dev/dsp, the modem won't even attach to sio0 anymore. Here is a
dmesg output, if any other information is needed, I would be glad to
provide it:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Tue Dec 7 18:31:44 EST 1999
culverk@culverk.student.umd.edu:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 127414272 (124428K bytes)
Preloaded elf kernel "kernel" at 0xc029c000.
Preloaded elf module "bktr.ko" at 0xc029c09c.
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <VGA-compatible display device> at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
pci0: UHCI USB controller (vendor=0x8086, dev=0x7112) at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> at device 7.3 on pci0
pci0: unknown card (vendor=0x121a, dev=0x0002) at 13.0
pci0: unknown card (vendor=0x121a, dev=0x0002) at 15.0
bktr0: <BrookTree 878> irq 5 at device 17.0 on pci0
bktr0: Hauppauge Model 61291 D110
Warning - Unknown Hauppauge Tuner 0xa
Hauppauge WinCast/TV, Philips NTSC tuner.
pci0: unknown card (vendor=0x109e, dev=0x0878) at 17.1 irq 5
de0: <Digital 21140A Fast Ethernet> irq 10 at device 19.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:c0:f0:1f:21:02
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
unknown0: <SupraExpress 56i> at port 0x2f8-0x2ff irq 3 on isa0
sbc0: <Creative ViBRA16X PnP> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 9 drq 0,1 on isa0
pcm0: <SB PCM Audio> on sbc0
unknown1: <Game> at port 0x201 on isa0
ad0: <Maxtor 90845D4/GAS54112> ATA-4 disk at ata0 as master
ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad1: <Maxtor 84320D4/NAVX1920> ATA-3 disk at ata0 as slave
ad1: 4120MB (8438850 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad2: <FUJITSU MPC3064AT/6020> ATA-3 disk at ata1 as master
ad2: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S
ad2: 16 secs/int, 1 depth queue, UDMA33
acd0: <CD-ROM 40X/AKU/U30> CDROM drive at ata1 as slave
, 128KB buffer, PIO
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked
da0 at vpo0 bus 0 target 6 lun 0
da0: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
da0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/wd1s1a
de0: enabling 10baseT port
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.20.9912101449330.2592-100000>