Date: Mon, 17 Jun 2002 04:52:19 +0200 From: "Aragon Gouveia" <aragon@phat.za.net> To: <freebsd-stable@freebsd.org>, <don@sandvine.com> Subject: Re: CPU temperature, SMB, Intel E7500 chipset, xeon, supermicro P4DPR Message-ID: <001701c215aa$00efe2e0$01000001@aragon> References: <FE045D4D9F7AED4CBFF1B3B813C85337676492@mail.sandvine.com> <3D0D3C4B.7060502@sbcglobal.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I also have the same problem. My mobo (Asus TUSL2C) uses the Intel 815EP chipset. ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 Slightly different to your's. I couldn't get lmmon to work properly for me, but with healthd I get fan speed and motherboard temperature. If you figure it out, would also love to know :). Regards, Aragon > Don Bowman wrote: > > >I have a motherboard with an Intel E7500 chipset (a Supermicro P4DPR+) > >running 2 xeon processors. I would like to be able to read the > >processor temperature. > > > >I've installed the lmmon port. When I run it (without -i), I > >get 'IOCTL: Device not configured'. > > > >Using ktrace, I can see that it is opening /dev/smb0. > > > >$ dmesg | grep -i smb > >ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1100-0x111f irq 0 at > >device 31.3 on pci0 > >smbus0: <System Management Bus> on ichsmb0 > >smb0: <SMBus general purpose I/O> on smbus0 > > > >Running lmmon -i works, but there's no CPU temperature, just the > >motherboard. > > > >Any suggestions? > > > >--don To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001701c215aa$00efe2e0$01000001>