Date: Tue, 20 Mar 2001 17:14:09 -0700 From: Rick Ponomar <rponomar@home.com> To: freebsd-questions@FreeBSD.org Subject: Kernel Config Message-ID: <01032016363000.00449@freebsd.lb.shawcable.net>
index | next in thread | raw e-mail
[-- Attachment #1 --] I have been trying to make a custom kernel for BSD 4.2 so that I can incorporate my sound card. I am new to BSD but do have some experience with Linux (Debian,Mandrake, and Caldera). I have faithfully followed the instructions in the Configuring the Kernel Docs and have completed both build world and make world with no problems (I think). I copied the generic kernel and gave it a new name (RICK) and changed the parameters for my machine as per the instructions. When I run the buildkernel command, I have no problems. When I next run the installkernel command, the installkernel fails with error code64 and error code 1. I have attached both the New Kernel File and the output of the build and install. Any help would be greatly appeciated. Thanks Rick Ponomar rponomar@home.com [-- Attachment #2 --] # # RICK -- Customized kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 n_hibma Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident RICK maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device,NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci device pcm # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced PowerManagement # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device rl # RealTek 8129/8139 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ulpt # Printer [-- Attachment #3 --] Script started on Tue Mar 20 16:30:07 2001 freebsd# cd /usr/src freebsd# make buildkernel KERNEL=.4.2-STABLE=RICK -------------------------------------------------------------- >>> Rebuilding kernel(s) -------------------------------------------------------------- freebsd# make buildkernel KERNEL=.4.2-STABLE=RICK[Pk[Pk[Pk[Pk[Pk[@ik[@nk[@sk[@tk[@ak[@lk[@lkke nel KER EL=.4.2 STABLE= ICK cd /usr/obj/usr/src/sys/; MAKEOBJDIRPREFIX=/usr/obj COMPILER_PATH=/usr/obj/usr/src/i386/usr/libexec:/usr/obj/usr/src/i386/usr/bin LIBRARY_PATH=/usr/obj/usr/src/i386/usr/lib:/usr/obj/usr/src/i386/usr/lib OBJFORMAT_PATH=/usr/obj/usr/src/i386/usr/libexec PERL5LIB=/usr/obj/usr/src/i386/usr/libdata/perl/5.00503 MACHINE=i386 make KERNEL=kernel install install -c -o root -g wheel -m 444 bsd.README bsd.dep.mk bsd.doc.mk bsd.docb.mk bsd.info.mk bsd.kern.mk bsd.kmod.mk bsd.lib.mk bsd.libnames.mk bsd.man.mk bsd.obj.mk bsd.own.mk bsd.port.mk bsd.port.post.mk bsd.port.pre.mk bsd.port.subdir.mk bsd.prog.mk bsd.sgml.mk bsd.subdir.mk sys.mk /mk usage: install [-CcDpsv] [-f flags] [-g group] [-m mode] [-o owner] file1 file2 install [-CcDpsv] [-f flags] [-g group] [-m mode] [-o owner] file1 ... fileN directory install -d [-v] [-g group] [-m mode] [-o owner] directory ... *** Error code 64 Stop in /usr/obj/usr/src/sys. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. freebsd# exit exit Script done on Tue Mar 20 16:31:26 2001help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01032016363000.00449>