Date: Mon, 27 Jul 2020 16:43:52 -0700 From: Mark Millard <marklmi@yahoo.com> To: John-Mark Gurney <jmg@funkthat.com> Cc: FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: CFT: major update to if_ure (patch did not apply cleanly for head -r363510) (example PowerMac problem?) Message-ID: <C2C302F7-7F36-450D-AF91-858008CBC5FA@yahoo.com> In-Reply-To: <F5CFD6E1-787B-4416-B666-86847166D99F@yahoo.com> References: <D5A3AECA-96C8-4E16-8795-B590ED9D82E3.ref@yahoo.com> <D5A3AECA-96C8-4E16-8795-B590ED9D82E3@yahoo.com> <20200727012035.GS4213@funkthat.com> <F5CFD6E1-787B-4416-B666-86847166D99F@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2020-Jul-26, at 18:20, John-Mark Gurney <jmg at funkthat.com> wrote: > Mark Millard wrote this message on Sat, Jul 25, 2020 at 19:13 -0700: >> For reference for what applying the patch >> reported (see Hunk #14): >=20 > Ok, updated it to be relative to r363583... >=20 > I had made a white spcae commit to if_ure.c, but hadn't made the > patch relative to it after that commit.. should work now.. I updated an old PowerMac G5 (2 sockets/2 cores each) to head -r363590 with the update patch and tjen plugged in the USB EtherNet device. The result (extracted from dmesg -a) was: usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT ugen2.2: <Unknown > at usbus2 (disconnected) uhub_reattach_port: could not allocate new device Unfortunately, I'd not tried a PowerMac with the type of device before the update. I do not know if the above is new behavior or not. The PowerMac is big-endian, which is what got me to think about trying it there. The PowerMac is also 64-bit running a 64-bit FreeBSD. Its USB is 2.0. (It also has 2 GigaBit EtherNet ports of its own so I'm not likely to use a USB device outside special testing.) =3D=3D=3D Mark Millard marklmi at yahoo.com ( dsl-only.net went away in early 2018-Mar)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C2C302F7-7F36-450D-AF91-858008CBC5FA>