Date: Fri, 10 Jan 2003 02:08:09 -0500 (EST) From: "Kevin S. Brackett" <ksb@platypusgroup.com> To: mobile@freebsd.org Subject: Re: netgear MA311 not wanting to work with ibook. Message-ID: <20030110020615.I52582@tsunami.platypusgroup.com> In-Reply-To: <20030109222054.V47612@tsunami.platypusgroup.com> References: <20030109172836.B40641@tsunami.platypusgroup.com> <20030109222054.V47612@tsunami.platypusgroup.com>
next in thread | previous in thread | raw e-mail | index | archive | help
and another update, i got it all working, it seems to of been a bridge problem... so now i have wi0 on subnet 192.168.1/24 with another instance of natd running, it's not pretty but it works :) thanks to all! - kevin On Thu, 9 Jan 2003, Kevin S. Brackett wrote: > Okay, sorry to reply my own email, but it's getting weirder, i can ping > other ips on the subnet, just not the hostap server (or any ips connected > to it)... any ideas? > > > On Thu, 9 Jan 2003, Kevin S. Brackett wrote: > > > The card from dmesg: > > > > wi0: <Intersil Prism2.5> mem 0xef001000-0xef001fff irq 3 at device 9.0 on > > pci0 > > wi0: 802.11 address: 00:09:5b:12:09:8f > > wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) > > wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06 > > > > This is what i'm using to get it going: > > > > /sbin/sysctl net.link.ether.bridge=1 > > /sbin/sysctl net.link.ether.bridge_cfg="wi0 xl0" > > /sbin/sysctl net.inet.ip.forwarding=1 > > /sbin/ifconfig wi0 ssid ABYSS mediaopt hostap debug up > > > > ifconfig: > > > > xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 > > options=3<RXCSUM,TXCSUM> > > inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 > > inet6 fe80::201:2ff:fe29:411d%xl0 prefixlen 64 scopeid 0x1 > > ether 00:01:02:29:41:1d > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > > wi0: flags=8947<UP,BROADCAST,DEBUG,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu > > 1500 > > inet6 fe80::209:5bff:fe12:98f%wi0 prefixlen 64 scopeid 0x2 > > ether 00:09:5b:12:09:8f > > media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (DS/2Mbps > > <host > > ap>) > > status: associated > > ssid ABYSS 1:ABYSS > > stationname "FreeBSD WaveLAN/IEEE node" > > channel 3 authmode OPEN powersavemode OFF powersavesleep 100 > > wepmode OFF weptxkey 1 > > > > Debugging information: > > > > wihap_shutdown: sc=0xc3e8c000 whi=0xc3e8d06c > > wihap_init: sc=0xc3e8c000 whi=0xc3e8d06c > > wihap_shutdown: sc=0xc3e8c000 whi=0xc3e8d06c > > wihap_init: sc=0xc3e8c000 whi=0xc3e8d06c > > wi_start: dropping unassoc dst 00:60:b0:a2:9a:27 > > wihap_mgmt_input: len=6 MGMT: auth: > > wihap_auth_req: station 00:30:65:0a:8a:b7 algo=0x0 seq=0x1 > > wihap_auth_req: new station > > wihap_auth_req: returns status=0x0 > > wihap_mgmt_input: len=17 MGMT: assoc req: > > wihap_assoc_req: from station 00:30:65:0a:8a:b7 > > wihap_assoc_req: returns status=0x0 > > > > Using 5.0-CURRENT from a few weeks ago; here's something odd... i have the > > ibook set to use DHCP, and the hostap gateway is running isc-dhcpd, and > > the ibook is getting the DHCP information and the ibooks signal bar is > > about 90% full. > > > > > > any ideas? > > > > TIA > > - kevin > > > > PS: please CC: replies :) > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030110020615.I52582>