Date: Sun, 12 Nov 2000 05:13:05 -0800 (PST) From: Glendon Gross <gross@pbrun.com> To: current@freebsd.org Subject: AWE-64 no longer detected... Message-ID: <Pine.BSF.4.21.0011120511190.3569-100000@bsd.pbrun.com>
next in thread | raw e-mail | index | archive | help
Since my last cvsup, my Soundblaster AWE-64 card is no longer
detected.
unknown: <Audio> can't assign resources
unknown: <Game> can't assign resources
unknown0: <WaveTable> at port 0x620-0x623 on isa0
Has anyone else seen this problem? Below is the full dmesg output.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RC2 #10: Fri Nov 10 20:44:42 PST 2000
root@bsd.pbrun.com:/usr/src/sys/compile/clonix.sound
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (166.40-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 59555840 (58160K bytes)
Preloaded elf kernel "kernel" at 0xc03e3000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 power on failed, IOERROR
uhub0: port 2 power on failed, IOERROR
chip1: <Intel 82371AB Power management controller> port 0x5f00-0x5f0f at device 7.3 on pci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 9.0 irq 0
ahc0: <Adaptec aic7860 SCSI adapter> port 0xd800-0xd8ff mem 0xffeef000-0xffeeffff irq 11 at device 10.0 on pci0
ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
isa0: too many dependant configs (8)
isa0: unexpected small tag 14
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: Ethernet address 00:00:00:00:00:00
ex: WARNING: board's EEPROM is configured for IRQ 3, using 5
ex0: <Intel EtherExpress(TM) PRO Adapter> at port 0x200-0x20f iomem 0xc8000-0xcbfff irq 5 on isa0
ex0: Ethernet address 00:aa:00:b8:cc:e8
unknown: <Audio> can't assign resources
unknown: <Game> can't assign resources
unknown0: <WaveTable> at port 0x620-0x623 on isa0
ep1: <3Com 3C509B-TPO EtherLink III (PnP)> at port 0x210-0x21f irq 12 on isa0
ep1: Ethernet address 00:60:97:50:cf:72
BRIDGE 990810, have 11 interfaces
-- index 1 type 6 phy 0 addrl 6 addr 00.00.00.00.00.00
-- index 2 type 6 phy 0 addrl 6 addr 00.aa.00.b8.cc.e8
-- index 3 type 6 phy 0 addrl 6 addr 00.60.97.50.cf.72
IPsec: Initialized Security Association Processing.
IPv6 packet filtering initialized, default to accept, unlimited logging
ad0: 6149MB <WDC AC36400L> [13328/15/63] at ata0-master using UDMA33
acd0: CDROM <CD-ROM CDU4011> at ata1-master using PIO4
Waiting 7 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU M2684S-512 2035> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 507MB (1039329 512 byte sectors: 64H 32S/T 507C)
ex0: not multicast capable, IPv6 not enabled
ex0: promiscuous mode enabled
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0011120511190.3569-100000>