Date: Tue, 19 Mar 2002 11:44:50 -0800 From: "Aaron Heck" <AHeck@ouc.bc.ca> To: <freebsd-hardware@FreeBSD.ORG> Subject: Promise Ultra133 TX2 Message-ID: <10B4F29FEAE5D54895E9FE232C0C255C15C496@klo-exch-1.ouc.bc.ca>
next in thread | raw e-mail | index | archive | help
Does anybody have this card currently functioning in any 4.x machine? I
realize it's not in the currently supported hardware list, but I thought
perhaps there might be a way just to tweak the current ATA driver to
enable it to probe the card. Or is it that this card is fully supported
using the same Ultra100/TX2 code but I need to manually specifiy it in
the kernel with ata2 and ata3 lines?
I purchased it to get around speed, corruption and drive capacity issues
I've had with my GX chipset.
Thanks!
Aaron
Dmesg spam follows:
--------------------------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.3-RELEASE #0: Sun Mar 17 23:37:06 PST 2002
lupis@bulbasaur.2y.net:/usr/src/sys/compile/i22031701
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x619 Stepping =3D 9
=20
Features=3D0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC=
A
,CMOV>
real memory =3D 139526144 (136256K bytes)
avail memory =3D 132018176 (128924K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 3
IOAPIC #0 intpin 17 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
IOAPIC #0 intpin 19 -> irq 11
IOAPIC #0 intpin 20 -> irq 15
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0378000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe880-0xe8ff mem
0xfebe7f80-0xfebe7fff irq 3 at device 17.0 on pci0
xl0: Ethernet address: 00:50:04:0e:fc:8f
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xef00-0xef3f irq 9 at
device 18.0 on pci0
xl1: Ethernet address: 00:60:08:a5:d6:51
miibus1: <MII bus> on xl1
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=3D0x105a, dev=3D0x4d69) at 19.0 irq 10
pci0: <ATI Mach64-CT graphics accelerator> at 20.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sbc1: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b
irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc1
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to accept, logging limited to 100 packets/entry by
default
IP Filter: v3.4.16 initialized. Default =3D pass all, Logging =3D =
enabled
SMP: AP CPU #1 Launched!
ad0: 9773MB <FUJITSU MPF3102AT> [19857/16/63] at ata0-master WDMA2
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?10B4F29FEAE5D54895E9FE232C0C255C15C496>