Date: Sun, 13 Feb 2000 11:55:47 -0800 (PST) From: The Root of all Vile <root@mordred.cs.ucla.edu> To: freebsd-hardware@freebsd.org, freebsd-stable@freebsd.org Subject: Sony SDT-5000 and my configuration Message-ID: <200002131955.LAA00455@mordred.cs.ucla.edu>
next in thread | raw e-mail | index | archive | help
Here's my configuration, FWIW.
-scooter
---------------------------------------------------------------------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-STABLE #13: Sat Feb 12 16:01:50 PST 2000
root@mordred.cs.ucla.edu:/usr/src/sys/compile/MORDRED
Timecounter "i8254" frequency 1193242 Hz
Timecounter "TSC" frequency 233875483 Hz
CPU: AMD-K6tm w/ multimedia extensions (233.88-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 67108864 (65536K bytes)
avail memory = 62746624 (61276K bytes)
Preloaded elf kernel "kernel" at 0xc02bd000.
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x01 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=1106 device=8597)> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
uhci0: <VIA 83C572 USB Host Controller> rev 0x02 int d irq 11 on pci0.7.2
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 9 on pci0.8.0
pn0: <82c169 PNIC 10/100BaseTX> rev 0x20 int a irq 11 on pci0.9.0
pn0: Ethernet address: 00:a0:cc:56:bc:7a
pn0: autoneg complete, link status good (full-duplex, 100Mbps)
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x04 int a irq 9 on pci1.5.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <6 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
usb0: <VIA 83C572 USB Host Controller>
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, logging limited to 100 packets/entry by default
Waiting 8 seconds for SCSI devices to settle
sa0 at ncr0 bus 0 target 3 lun 0
sa0: <SONY SDT-5000 3.17> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
da0 at ncr0 bus 0 target 0 lun 0
da0: <QUANTUM VIKING 4.5 NSE 880R> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 16), Tagged Queueing Enabled
da0: 4345MB (8899737 512 byte sectors: 255H 63S/T 553C)
cd0 at ncr0 bus 0 target 4 lun 0
cd0: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Logical unit not ready, manual intervention required
da1 at ncr0 bus 0 target 6 lun 0
da1: <IOMEGA ZIP 100 J.02> Removable Direct Access SCSI-2 device
da1: 3.300MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
pn0: selecting MII, 100Mbps, half duplex
pn0: selecting MII, 100Mbps, full duplex
(sa0:ncr0:0:3:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state.
(sa0:ncr0:0:3:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state.
----------------------------------------------------------------------
machine "i386"
ident MORDRED
maxusers 32
makeoptions DEBUG="-g"
options PQ_HUGECACHE # color for 1024k/16k cache
#
# This directive defines a number of things:
# - The compiled kernel is to be called `kernel'
# - The root filesystem might be on partition wd0a
# - Crash dumps will be written to wd0b, if possible. Specifying the
# dump device here is not recommended. Use dumpon(8).
#
config kernel root on da0s2a
cpu "I586_CPU" # aka Pentium(tm)
options "CPU_WT_ALLOC"
options "NO_F00F_HACK"
options "COMPAT_43"
options USER_LDT
options SYSVSHM
options SYSVSEM
options SYSVMSG
options "MD5"
options "VM86"
options DDB
options KTRACE
options PERFMON
options UCONSOLE
options USERCONFIG
options VISUAL_USERCONFIG
# This is good for 100Mb Ethernet, makes timing resolution decent:
options HZ=1000
options INET
options "TCP_COMPAT_42" #emulate 4.2BSD TCP bugs
options IPFIREWALL
options IPFIREWALL_VERBOSE
options "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity
options "ICMP_BANDLIM"
pseudo-device ether
pseudo-device loop
pseudo-device bpfilter 4
pseudo-device disc
options FFS #Fast filesystem
options MFS #Memory File System
options NFS #Network File System
options NFS_NOSERVER
options "CD9660" #ISO 9660 filesystem
options MSDOSFS #MS DOS File System
options FFS_ROOT #FFS usable as root device
options SOFTUPDATES
options NSWAPDEV=2
# NFS options:
options "NFS_MINATTRTIMO=3" # VREG attrib cache timeout in sec
options "NFS_MAXATTRTIMO=60"
options "NFS_MINDIRATTRTIMO=30" # VDIR attrib cache timeout in sec
options "NFS_MAXDIRATTRTIMO=60"
options "NFS_GATHERDELAY=10" # Default write gather delay (msec)
options "NFS_UIDHASHSIZ=29" # Tune the size of nfssvc_sock with this
options "NFS_WDELAYHASHSIZ=16" # and with this
options "NFS_MUIDHASHSIZ=63" # Tune the size of nfsmount with this
options "P1003_1B"
options "_KPOSIX_PRIORITY_SCHEDULING"
options "_KPOSIX_VERSION=199309L"
controller scbus0 #base SCSI code
device da0 #SCSI direct access devices (aka disks)
device sa0 #SCSI tapes
device cd0 #SCSI CD-ROMs
device pass0 #CAM passthrough driver
# The previous devices (ch, da, st, cd) are recognized by config.
# config doesn't (and shouldn't) know about these newer ones,
# so we have to specify that they are on a SCSI bus with the "at scbus?"
# clause.
device pt0 at scbus? # SCSI processor type
device sctarg0 at scbus? # SCSI target
options SCSI_DELAY=8000
pseudo-device pty 16
pseudo-device speaker
pseudo-device gzip
options "MSGBUF_SIZE=40960"
controller isa0
controller pnp0
#options "AUTO_EOI_1"
#options "AUTO_EOI_2"
#options "NTIMECOUNTER=20"
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
options VGA_ALT_SEQACCESS
options VESA
pseudo-device splash
device sc0 at isa? tty
options MAXCONS=6 # number of virtual consoles
options SC_HISTORY_SIZE=200 # number of history buffer lines
device npx0 at isa? port IO_NPX iosiz 0x0 flags 0x0 irq 13
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4
device sio1 at isa? port "IO_COM2" tty flags 0x10 irq 3
## Sound:
#device pcm0 at isa? port ? irq 5 drq 3 flags 0x0f
#controller snd0
#device sb0 at isa? port 0x220 irq 5 drq 3
#device sbxvi0 at isa? drq 5
#device sbmidi0 at isa? port 0x330
#device opl0 at isa? port 0x388
controller pci0
controller ncr0
device de0
device pn0
controller ppbus0
device lpt0 at ppbus?
device ppc0 at isa? disable port? tty irq 7
options CLK_CALIBRATION_LOOP
options "CLK_USE_I8254_CALIBRATION"
options CLK_USE_TSC_CALIBRATION
options CLUSTERDEBUG
options NBUF=512
options NMBCLUSTERS=1024
options PANIC_REBOOT_WAIT_TIME=16
options SHOW_BUSYBUFS # List buffers that prevent root unmount
controller uhci0
controller usb0
device ugen0
device ukbd0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200002131955.LAA00455>