Date: Fri, 3 Apr 1998 08:15:59 -0500 From: "Larry S. Marso" <larry@marso.com> To: freebsd-questions@FreeBSD.ORG, freebsd-scsi@FreeBSD.ORG Subject: scanner--*anyone* successful with FreeBSD? Message-ID: <19980403081559.64189@marso.com>
next in thread | raw e-mail | index | archive | help
I am wondering whether *anyone* has a scanner working in the FreeBSD environment, or if it's only a fool's (or a superlative hacker's) quest at the moment. I'm struggling with a brand-spanking new HP6100cse. My system utterly locks up whenever I access the scanner. Anytime I access /dev/pt0, using any of the software that supposedly supports hp scanners (commercial xvscan -- FreeBSD binaries or freshly compiled -- hpscan or sane 0.71), the *entire* system locks up. I'll give a little more info below ... but I'm mainly interested in learning whether this is a solvable problem in a reasonable time frame, or that I should return some of my recent equipment purchases while I still can. So, I ask again: is *anyone* using a scanner with 3.0-current? How about 2.2-? HP or other? /dev/pt0 or other? Best regards -- Larry S. Marso larry@marso.com ------------------------------------------------------------------------- Additional info: On my SERVER, which is a 486 with ISA bus, I use an adaptec 1520. Boot up messages seem fine: Apr 1 19:06:20 lsmarso /kernel: aic0 at 0x140-0x15f irq 9 on isa Apr 1 19:06:20 lsmarso /kernel: aic0: waiting for scsi devices to settle Apr 1 19:06:20 lsmarso /kernel: scbus0 at aic0 bus 0 Apr 1 19:06:20 lsmarso /kernel: sd0 at scbus0 target 4 lun 0 Apr 1 19:06:20 lsmarso /kernel: sd0: <iomega jaz 1GB H.72> type 0 removable SCSI 2 Apr 1 19:06:21 lsmarso /kernel: sd0: Direct-Access Apr 1 19:06:21 lsmarso /kernel: sd0: ILLEGAL REQUEST asc:24,0 Invalid field in CDB Apr 1 19:06:21 lsmarso /kernel: sd0 could not mode sense (4). Using ficticious geometry Apr 1 19:06:21 lsmarso /kernel: 1021MB (2091050 512 byte sectors) Apr 1 19:06:21 lsmarso /kernel: pt0 at scbus0 target 5 lun 0 Apr 1 19:06:21 lsmarso /kernel: pt0: <HP C2520A 3644> type 3 fixed SCSI 2 Apr 1 19:06:21 lsmarso /kernel: pt0: Processor By the way the jazz drive works great. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980403081559.64189>