Date: Sat, 12 Jan 2002 09:50:02 -0800 (PST) From: Daniel Jahre <daniel.jahre@informatik.tu-chemnitz.de> To: freebsd-bugs@FreeBSD.org Subject: Re: i386/33574: kernel hangs on page fault during boot process (kernel trap 12) on Intel based laptop computer Message-ID: <200201121750.g0CHo2u90709@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/33574; it has been noted by GNATS.
From: Daniel Jahre <daniel.jahre@informatik.tu-chemnitz.de>
To: freebsd-gnats-submit@FreeBSD.org
Cc: tedm@toybox.placo.com
Subject: Re: i386/33574: kernel hangs on page fault during boot process (kernel trap 12) on Intel based laptop computer
Date: Sat, 12 Jan 2002 18:45:53 +0100 (MET)
Hello,
sorry for that late answer but it took some to get FreeBSD
4.3 running on my laptop.
Here is the complete dmesg output from kernel 4.3:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (433.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 126291968 (123332K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 ViRGE MX+ graphics accelerator> at 1.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1100-0x110f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xf300-0xf31f irq 10 at
device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1400-0x140f at device
7.3 on pci0
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 10.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC
pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 10.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC
pci int + CSC serial isa irq]
pci0: <unknown card> (vendor=0x125d, dev=0x1969) at 16.0 irq 5
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 5729MB <TOSHIBA MK6014MAP> [12416/15/63] at ata0-master UDMA33
acd0: CDROM <CD-224E> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
ed1 at port 0x240-0x25f irq 9 slot 0 on pccard0
ed1: address 00:80:c8:c9:e3:29, type NE2000 (16 bit)
HTH,
Daniel Jahre
.............................................................
computer science student @ Chemnitz Universtity of Technology
.............................................................
international call: +491773367222
mailto: Daniel.Jahre@informatik.tu-chemnitz.de
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200201121750.g0CHo2u90709>