Date: Tue, 1 Jul 2003 12:25:31 -0400 (EDT) From: Paul Boehmer <paul@pboehmer.com> To: hardware@freebsd.org Subject: bktr msp34 help Message-ID: <20030701120702.I37908@netfoo.net>
next in thread | raw e-mail | index | archive | help
I recently received a STB PCI TV card (from an old Gatway PC) from a buddy due to lack of XP drivers and was delighted to find that the video capture works using the bktr driver. The only problem is that I cannot get audio output, no whitenoise, nothing. I did a search on the multimedia list and found the following link to a new MSP34XXXX driver ported from linux - http://people.freebsd.org/~alex, but the dmesg output is different in that the patched/unpatched kernel is the dmesg output line that writes: bktr0: msp3400: error while reading chip version Now the question.... How do I get the device to bind to the driver? I posted messages on the multimedia list, and got some ideas, but no luck. Is this something I need to email the bktr driver maintainer about? I can supply additional information if needed. Below is some system info: Relevant PCI Conf (pciconf -lv): -------------------------------------- bktr0@pci0:10:0: class=0x040000 card=0x263610b4 chip=0x036e109e rev=0x02 hdr=0x00 vendor = 'Brooktree Corporation' device = 'Bt878 MediaStream Controller' class = multimedia subclass = video none3@pci0:10:1: class=0x048000 card=0x263610b4 chip=0x0878109e rev=0x02 hdr=0x00 vendor = 'Brooktree Corporation' device = 'Bt878 Video Capture (Audio Section)' class = multimedia Partial dmesg list (with bktr.stable.patch applied): --------------------------------------- bktr0: <BrookTree 878> mem 0xdc9fe000-0xdc9fefff irq 5 at device 10.0 on pci0 iicbb0: <I2C bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicbus1: <Philips I2C bus> on iicbb0 master-only smbus0: <System Management Bus> on bti2c0 smb0: <SMBus general purpose I/O> on smbus0 bktr0: Detected a MSP3434\^A-\^A0 at 0x80 bktr0: STB TV/PCI, Philips FR1236 NTSC FM tuner, dbx stereo, msp3400c stereo. bktr0: msp3400: error while reading chip version pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 10.1 irq 5 Any help appreciated, thanks in advance -- Paul Boehmer paul@pboehmer.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030701120702.I37908>