Date: Thu, 4 May 2006 23:07:35 +0200 From: Lars Engels <lars.engels@0x20.net> To: freebsd-acpi@freebsd.org Subject: Standby / Resume on Amilo M7400 not working Message-ID: <20060504210735.GJ97014@e.0x20.net>
next in thread | raw e-mail | index | archive | help
--W/D3X8sky0X3AmG5 Content-Type: multipart/mixed; boundary="boAH8PqvUi1v1f55" Content-Disposition: inline --boAH8PqvUi1v1f55 Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello! On my Fujitsu-Siemens Amilo M7400 ACPI suspend/resume does not work. If I enter S3 state, the screen behaves very odd meaning it slowly turns to white from the borders to the center. Then all i can do is to power the machine down. The same effect is seen, when I use shut- down to power off the box when the AC cable is plugged in. Then additionally the DVD drive spins and the CPU cooler runs at full speed until I reset the notebook. I found out, that S3 is possible when running Linux with a special kernel module. Quote: "Jozef uses x86emu to reset the framebuffer device after the wakup." (http://www.angelfire.com/linux/notebook/fujitsu/m7400.html) Attached you find dmesg output after a boot -v with ACPI enabled. The asl file can be found at: http://bsd-geek.de/Files/lars-FSAM7400.asl iasl lars-FSAM7400.asl gives the following errors: lars-FSAM7400.asl 2611: Field (ERAM, AnyAcc, Lock, Preserve) Error 1073 - ^ Host Operation Region requires ByteAcc a= ccess lars-FSAM7400.asl 2710: Store (Arg2, DAT3) Error 1004 - Method argument is not initialized ^ (Arg2) lars-FSAM7400.asl 2710: Store (Arg2, DAT3) Remark 3064 - Not a parameter, used as local only ^ (Arg2) lars-FSAM7400.asl 4990: Noop Error 1094 - syntax error ^ ASL Input: lars-FSAM7400.asl - 5320 lines, 187635 bytes, 2222 keywords Compilation complete. 3 Errors, 0 Warnings, 1 Remarks, 402 Optimizations sysctl -a hw.acpi hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.reset_video: 1 hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85 hw.acpi.cpu.cx_lowest: C3 hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00% hw.acpi.battery.life: 93 hw.acpi.battery.time: -1 hw.acpi.battery.state: 2 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.tz0.temperature: 52.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 76.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 82.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1.temperature: 47.0C hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.passive_cooling: 0 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: 77.0C hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 86.0C hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 The system is: FreeBSD bart.bsd-geek.de 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Sun Apr 30 03:20:13 CEST 2006 lars@bart.bsd-geek.de:/usr/obj/usr/src/sys/BART i386 The BIOS is the most recent one. What could I do to fix the errors?=20 Thanks in advance for any help and hints. Lars P.S.: Please CC me as I am not subscribed to this mailing list. --boAH8PqvUi1v1f55 Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: attachment; filename="dmesg.log" cat dmesg.boot map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPCB.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LPCB.LNKC found-> vendor=0x8086, dev=0x24cd, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e0100000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPCB.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH found-> vendor=0x8086, dev=0x2448, revid=0x83 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0005, statreg=0x8880, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001810, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x24c3, revid=0x03 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKB:0) pcib0: slot 31 INTB routed to irq 10 via \\_SB_.PCI0.LPCB.LNKB found-> vendor=0x8086, dev=0x24c5, revid=0x03 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base e0100c00, size 9, enabled map[1c]: type 1, range 32, base e0100800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKB:0) pcib0: slot 31 INTB routed to irq 10 via \\_SB_.PCI0.LPCB.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x03 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKB:0) pcib0: slot 31 INTB routed to irq 10 via \\_SB_.PCI0.LPCB.LNKB pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 11 at device 2.0 on pci0 agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0 vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000 vgapci0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xe0000000 agp0: detected 8060k stolen memory agp0: aperture size is 128M drm0: <Intel i852GM/i855GM GMCH> on vgapci0 info: [drm] AGP at 0xe8000000 128MB info: [drm] Initialized i915 1.4.0 20060119 vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0 drm1: <Intel i852GM/i855GM GMCH> on vgapci1 info: [drm] AGP at 0xe8000000 128MB info: [drm] Initialized i915 1.4.0 20060119 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0100000 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0x0-0x0 pcib1: prefetched decode 0x0-0x0 pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 2.5.INTA at func 0: 10 ACPI: Found matching pin for 2.9.INTA at func 0: 255 ACPI: Found matching pin for 2.3.INTA at func 0: 10 ACPI: Found matching pin for 2.6.INTA at func 0: 10 pci2: <ACPI PCI bus> on pcib1 pci2: physical bus=2 found-> vendor=0x11c1, dev=0x5811, revid=0x61 bus=2, slot=3, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0112, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e0202000, size 12, enabled pcib1: (null) requested memory range 0xe0202000-0xe0202fff: good pcib1: matched entry for 2.3.INTA (src \\_SB_.PCI0.LPCB.LNKF:0) pcib1: slot 3 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKF found-> vendor=0x14e4, dev=0x4401, revid=0x01 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0810, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e0200000, size 13, enabled pcib1: (null) requested memory range 0xe0200000-0xe0201fff: good pcib1: matched entry for 2.5.INTA (src \\_SB_.PCI0.LPCB.LNKE:0) pcib1: slot 5 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKE found-> vendor=0x8086, dev=0x1043, revid=0x04 bus=2, slot=6, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0112, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e0203000, size 12, enabled pcib1: (null) requested memory range 0xe0203000-0xe0203fff: good pcib1: matched entry for 2.6.INTA (src \\_SB_.PCI0.LPCB.LNKG:0) pcib1: slot 6 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKG found-> vendor=0x104c, dev=0xac56, revid=0x00 bus=2, slot=9, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled fwohci0: <Lucent FW322/323> mem 0xe0202000-0xe0202fff irq 10 at device 3.0 on pci2 fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0202000 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 04:e4:0a:00:1a:04:20:16 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 06:e4:0a:04:20:16 fwe0: bpf attached fwe0: Ethernet address: 06:e4:0a:04:20:16 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xe0200000-0xe0201fff irq 10 at device 5.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xe0200000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:0a:e4:24:40:3d bfe0: [GIANT-LOCKED] ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xe0203000-0xe0203fff irq 10 at device 6.0 on pci2 ipw0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0203000 ipw0: bpf attached ipw0: Ethernet address: 00:0c:f1:2d:10:93 ipw0: bpf attached ipw0: bpf attached ipw0: [GIANT-LOCKED] ipw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps cbb0: <TI1510 PCI-CardBus Bridge> at device 9.0 on pci2 pcib1: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 2.9.INTA (src \\_SB_.PCI0.LPCB.LNKF:0) pcib1: slot 9 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKF cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac56104c 0x02100007 0x06070000 0x00024010 0x10: 0x80000000 0x020000a0 0x40030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010a 0x40: 0x10331734 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d061 0x00000000 0x00000000 0x01001002 0x90: 0x606402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00100 0x00000007 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 10 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xe0100c00 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xe0100800 pcm0: [MPSAFE] pcm0: <Cirrus Logic CS4299 AC97 Codec (id = 0x43525934)> pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP pcm0: ac97 codec dac ready count: 0 pcm0: sndbuf_setmap 3ddf4000, 4000; 0xe3b28000 -> 3ddf4000 pcm0: sndbuf_setmap 3ddef000, 4000; 0xe3b2c000 -> 3ddef000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 sio0: irq maps: 0x601 0x609 0x601 0x601 sio0 port 0x3f8-0x3ff irq 3 drq 1 flags 0x10 on acpi0 sio0: type 16550A sio0: [FAST] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0-00, 7 buttons psm0: config:00000000, flags:00000008, packet size:6 psm0: syncmask:c0, syncbits:00 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcd000-0xcdfff,0xce000-0xcefff,0xd8000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x601 0x601 0x601 0x601 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1499834104 Hz quality 800 Timecounters tick every 1.000 msec IPv6 packet filtering initialized, default to accept, logging disabled Linux ELF exec handler installed IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging disabled lo0: bpf attached battery0: battery initialization start acpi_acad0: acline initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire atapicam: atapicam0 already exists; skipping it ad0: setting PIO4 on ICH4 chip cpu0: Cx states changed acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad0: setting UDMA100 on ICH4 chip ad0: 38154MB <SAMSUNG MP0402H UC100-14> at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH4 chip acd0: setting UDMA33 on ICH4 chip acd0: <HL-DT-STCD-RW/DVD DRIVE GCC-4241N/0W33> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48007 Hz, will use 48000 Hz battery0: battery initialization done, tried 1 times (probe7:ata1:0:0:0): error 22 (probe7:ata1:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <HL-DT-ST RW/DVD GCC-4241N 0W33> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4241N 0W33> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init linprocfs registered cpu0: Cx states changed drm0: [MPSAFE] --boAH8PqvUi1v1f55-- --W/D3X8sky0X3AmG5 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (FreeBSD) iD8DBQFEWm0XKc512sD3afgRAtXTAKCtBOfhZW0K0bu87mXmrvf/3zBPEACgiOKD E1FXZp1/wQzxz8HIsiZRIl4= =1TiL -----END PGP SIGNATURE----- --W/D3X8sky0X3AmG5--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060504210735.GJ97014>