Date: 19 Dec 98 13:03:49 America/Fort_Wayne From: Stephen Palmer <slpalmer@netscape.net> To: gp@oitunix.oit.umass.edu, freebsd-current@FreeBSD.ORG Subject: Request fo help with Zip Drive on vpo0 in -current] Message-ID: <19981219130349.11043.qmail@www0f.netaddress.usa.net>
next in thread | raw e-mail | index | archive | help
It doesn't look like the crospost to -current worked.. I'm re-sending it. slpalmer slpalmer@netscape.net gp@oitunix.oit.umass.edu wrote: > On Fri, Dec 18, 1998 at 02:46:24AM +0000, Stephen Palmer wrote: > > Can someone offer assistance in getting a Parallel Port Zip Drive > > working under FreeBSD 3.0-current? I've searched the mailing lists > > and LINT, and added what I thought were the correct options. > > As you can read in my dmesg output below, my ppbus and vpo0 do > > get detected, but da0 and scbus do not. A gentle nudge in the right > > direction would be most graciously appreciated! > > > > Stephen L. Palmer > > slpalmer@netscape.net > > I think this got broken in -current. I had my ||-port zip running > on -current from the last week or so of Nov., but it didn't work > with sources from Dec. 12. > > I hope the cross-post is appropriate here. I thought some > -current types should see this. > > Greg > > > > > KERNEL CONFIG FILE > > > > machine "i386" > > cpu "I486_CPU" > > cpu "I586_CPU" > > cpu "I686_CPU" > > ident MIDEARTH > > maxusers 32 > > options MATH_EMULATE #Support for x87 emulation > > options INET #InterNETworking > > options FFS #Berkeley Fast Filesystem > > options FFS_ROOT #FFS usable as root device [keep this!] > > options MFS #Memory Filesystem > > options MFS_ROOT #MFS usable as root device, "MFS" req'ed > > options NFS #Network Filesystem > > options NFS_ROOT #NFS usable as root device, "NFS" req'ed > > options MSDOSFS #MSDOS Filesystem > > options "CD9660" #ISO 9660 Filesystem > > options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed > > options PROCFS #Process filesystem > > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > > options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device > > options UCONSOLE #Allow users to grab the console > > options FAILSAFE #Be conservative > > options USERCONFIG #boot -c editor > > options VISUAL_USERCONFIG #visual boot -c editor > > config kernel root on wd0 > > controller isa0 > > controller eisa0 > > controller pci0 > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 > > disk fd0 at fdc0 drive 0 > > disk fd1 at fdc0 drive 1 > > tape ft0 at fdc0 drive 2 > > options "CMD640" # work around CMD640 chip deficiency > > controller wdc0 at isa? port "IO_WD1" bio irq 14 > > disk wd0 at wdc0 drive 0 > > disk wd1 at wdc0 drive 1 > > controller wdc1 at isa? port "IO_WD2" bio irq 15 > > disk wd2 at wdc1 drive 0 > > disk wd3 at wdc1 drive 1 > > options ATAPI #Enable ATAPI support for IDE bus > > options ATAPI_STATIC #Don't do it as an LKM > > device wcd0 #IDE CD-ROM > > device wfd0 #IDE Floppy (e.g. LS-120) > > controller dpt0 > > device sc0 at isa? port IO_KBD conflicts tty irq 1 > > device npx0 at isa? port IO_NPX irq 13 > > device apm0 at isa? disable flags 0x31 # Advanced Power Management > > device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 > > device sio1 at isa? port "IO_COM2" tty irq 5 > > device sio2 at isa? disable port "IO_COM3" tty irq 5 > > device sio3 at isa? disable port "IO_COM4" tty irq 9 > > device psm0 at isa? port IO_KBD conflicts tty irq 12 > > pseudo-device loop > > pseudo-device ether > > pseudo-device sl 1 > > pseudo-device ppp 1 > > pseudo-device tun 1 > > pseudo-device pty 16 > > pseudo-device gzip # Exec gzipped a.out's > > options KTRACE #kernel tracing > > options SYSVSHM > > > > controller pnp0 > > device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 > > > > controller smbus0 > > device smb0 at smbus? > > controller iicbus0 > > controller iicbb0 > > device ic0 at iicbus? > > device iic0 at iicbus? > > device iicsmb0 at iicbus? > > controller ppc0 at isa? port ? tty irq 7 > > controller ppbus0 > > controller vpo0 at ppbus? > > controller scbus0 at vpo0 > > device da0 > > > > END KERNEL CONFIG FILE > > > > OUTPUT FROM DMESG > > > > Copyright (c) 1992-1998 FreeBSD Inc. > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > FreeBSD 3.0-CURRENT #5: Wed Dec 16 23:46:24 CST 1998 > > slpalmer@midearth.dyn.ml.org:/usr/src/sys/compile/MIDEARTH > > Timecounter "i8254" frequency 1193182 Hz > > CPU: AMD-K6tm w/ multimedia extensions (233.86-MHz 586-class CPU) > > Origin = "AuthenticAMD" Id = 0x562 Stepping=2 > > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> > > real memory = 67108864 (65536K bytes) > > config> quit > > avail memory = 62722048 (61252K bytes) > > Probing for devices on PCI bus 0: > > chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0 > > chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 > > ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 > > chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 > > vga0: <VGA-compatible display device> rev 0x03 int a irq 10 on pci0.8.0 > > Probing for PnP devices: > > CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x1b9e4f4c Comp ID: PNPb02f > > [0x2fb0d041] > > pcm1 (SB16pnp <SB16 PnP> sn 0x1b9e4f4c) at 0x220-0x22f irq 9 drq 1 flags 0x17 > > on isa > > Probing for devices on the ISA bus: > > sc0 at 0x60-0x6f irq 1 on motherboard > > sc0: VGA color <16 virtual consoles, flags=0x0> > > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > > sio0: type 16550A > > sio1 at 0x2f8-0x2ff irq 5 on isa > > sio1: type 16550A > > psm0 not found at 0x60 > > ppc: parallel port found at 0x378 > > ppc0 at 0x378 irq 7 on isa > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0 > > vpo0: EPP 1.9 mode > > pcm0 not probed due to drq conflict with pcm1 at 1 > > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: 1.44MB 3.5in > > wdc0 at 0x1f0-0x1f7 irq 14 on isa > > wdc0: unit 0 (wd0): <WDC AC36400L> > > wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S > > wdc1 at 0x170-0x177 irq 15 on isa > > wdc1: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis > > wcd0: 4134KB/sec, 256KB cache, audio play, 255 volume levels, ejectable tray > > wcd0: no disc inside, unlocked > > wdc1: unit 1 (atapi): <Memorex CRW-1622/ D3.7>, removable, dma, iordy > > wcd1: 344/1034KB/sec, 1024KB cache, audio play, 128 volume levels, ejectable > > tray > > wcd1: no disc inside, unlocked, lock protected > > npx0 on motherboard > > npx0: INT 16 interface > > Waiting 15 seconds for SCSI devices to settle > > changing root device to wd0s2a > > > > END DMESG OUTPUT > > > > --- | > > Stephen L. Palmer | Sprint Paranet > > slpalmer@netscape.net \|/ slpalmer@sprintparanet.com > > "There are thousands of intelligent species in the > > Universe, and they all own cats." -Unknown > > > > ____________________________________________________________________ > > More than just email--Get your FREE Netscape WebMail account today at http://home.netscape.com/netcenter/mail > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message --- | Stephen L. Palmer | Sprint Paranet slpalmer@netscape.net \|/ slpalmer@sprintparanet.com "There are thousands of intelligent species in the Universe, and they all own cats." -Unknown ____________________________________________________________________ More than just email--Get your FREE Netscape WebMail account today at http://home.netscape.com/netcenter/mail To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19981219130349.11043.qmail>