Date: Sun, 12 Feb 2012 22:05:35 +0400 From: Stas Orlov <sennaar@gmail.com> To: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org>, "freebsd-current@freebsd.org" <freebsd-current@freebsd.org>, "Kenneth D. Merry" <ken@freebsd.org>, Dennis Glatting <freebsd@penx.com> Subject: Re: LSI supported mps(4) driver available Message-ID: <CAECV3vDthUKCqfouFEjKvDcL5CdwUJ=y1=YCiRTYFQtMjVfm=Q@mail.gmail.com> In-Reply-To: <B2FD678A64EAAD45B089B123FDFC3ED72B96D3400C@inbmail01.lsi.com> References: <20120126045409.GA90912@nargothrond.kdm.org> <CAECV3vDaRFiPN5jrG85qXpfGUEbCbwBqhc_==P0GT77eH7u3yg@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED729A3414D62@inbmail01.lsi.com> <CAECV3vA9HpHpBsjuKN8rKObmko%2BHJQO0GkHMZnxekPkmOuoQZw@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED729A3414D65@inbmail01.lsi.com> <CAECV3vBgDq=xY=sR9-XHR1grW_3-dqmg4v_jE4Yvf4CZPF0X9g@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED729A3414DD9@inbmail01.lsi.com> <CAECV3vDyeS_Cs1cZ24D97nUrc02OgH1SKc6KsAb8kwQK35pn2w@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED729A341500D@inbmail01.lsi.com> <B2FD678A64EAAD45B089B123FDFC3ED729A3415010@inbmail01.lsi.com> <20120207170016.GA51826@nargothrond.kdm.org> <B2FD678A64EAAD45B089B123FDFC3ED729A34150B2@inbmail01.lsi.com> <CAECV3vBB7xNJ_J8Qx%2Bd8bbD3aCOyigROf=LTXSPa8kO4baXF0w@mail.gmail.com> <B2FD678A64EAAD45B089B123FDFC3ED72B96D3400C@inbmail01.lsi.com>
index | next in thread | previous in thread | raw e-mail
> Out of those six Drive, one drive is detected as "1.5Gbps" (see below part in dmesg log) > > PHY[8].AttachedDevHandle: 0x0009 > PHY[8].LinkRate: 1.5Gbps (0x80) > PHY[8].PhyStatus: NewTargetAdde > > LSI IR does not support mix of mix of different link speed Drivers in a single Volume. > I am not sure if this is root cause of the issue, but definetly worth to try why that Particular drive is > At 1.5 Gbps link ? > > Can you try to see if it is cable which is causing link to 1.5 OR Drive itself has 1.5 Gbps max speed. ? > All six of them are SEAGATE ST9300603SS FS62, 1.5Gbps speed is quite odd. Can't check cabeling right now, I'll exclude that drive from tests for nowhome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAECV3vDthUKCqfouFEjKvDcL5CdwUJ=y1=YCiRTYFQtMjVfm=Q>