Date: Sun, 27 Sep 2009 14:25:44 -0700 (PDT) From: Jin Guojun <jguojun@sbcglobal.net> To: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> Cc: current@freebsd.org Subject: Re: Is SATA HOT plug in still supported in Current? Message-ID: <897832.9654.qm@web82208.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
FYI, Installed and boot 8.0-RC1 with verbose on, then hot plug in the SATA drive, no more message comes out. No error and nothing. Reboot machine with SATA plugged-in, system sees the SATA drive fine. BTW, I did not see the previous my reply in the archive (because I did not get any respond for the error, so I checked archive), I guess my previous email might get lost somehow. --- On Mon, 9/21/09, Jin Guojun <jguojun@sbcglobal.net> wrote: > From: Jin Guojun <jguojun@sbcglobal.net> > Subject: Re: Is SATA HOT plug in still supported in Current? > To: "Gavin Atkinson" <gavin.atkinson@ury.york.ac.uk> > Cc: current@freebsd.org > Date: Monday, September 21, 2009, 6:03 AM > Only the SATA plug-in message is > attached. Plug-in sees an error. > > The boot-up dmesg is also available at http://www.daemonfun.com/hd-bub/boot-dmesg.txt if it > helps. > > --- On Sun, 9/20/09, Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> > wrote: > > > From: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> > > Subject: Re: Is SATA HOT plug in still supported in > Current? > > To: "Jin Guojun" <jguojun@sbcglobal.net> > > Cc: current@freebsd.org, > question@freebsd.org > > Date: Sunday, September 20, 2009, 9:04 AM > > On Sat, 19 Sep 2009, Jin Guojun > > wrote: > > > It seems that SATA hot-plug-in is no longer > supported > > in current -- both 7.2 and 8.0. > > > > > > I have a GeForce6100PM-M2 motherboard with both > PATA > > and SATA installed. > > > System boots from PATA derives for 6.4, 7.2 and > > 8.0-Beta4 with SATA offline. > > > > > > After system is up, power SATA, 6.4 sees the > dirve > > right way and disk is automatically attached to > > ata2-master. > > > > > > When boot to both 7.2 and 8.0, hot plug-in SATA > drive > > does not show any message to the system. > > > Issueing command "atacontrol attach ata2" or > > "atacontrol reinit ata2" does not get disk online. > Without > > chnage anything, and just reboot the system, the SATA > drive > > will show up. > > > > Can you boot with verbose dmesg enabled, and without > the > > disk attached, > > then plug the disk in after boot? Then please > upload > > the output of > > "dmesg" somewhere and send a link to it to the list? > > > > Thanks, > > > > Gavin > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?897832.9654.qm>