Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 12 Feb 2004 12:44:41 +0100
From:      Alexander Leidinger <Alexander@Leidinger.net>
To:        Johan Pettersson <manlix@demonized.net>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Bad interrupt routing causes my SATA controller to fail.
Message-ID:  <20040212124441.12d3a0aa@Magellan.Leidinger.net>
In-Reply-To: <20040212023806.1007984e.manlix@demonized.net>
References:  <20040211025317.13af3d36.manlix@demonized.net> <200402111322.57127.jhb@FreeBSD.org> <20040212023806.1007984e.manlix@demonized.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 12 Feb 2004 02:38:06 +0100
Johan Pettersson <manlix@demonized.net> wrote:

Putinas, I've CCed you, because it seems we're all sitting in the same
boat.

> 1) HTT + ACPI - Hangs with error on ad4
> 2) no HTT + ACPI - Successful
> 3) ACPI and no apic (set hint.apic.0.disabled=1 from loader) - Successfull
> 4) no ACPI (set hint.acpi.0.disabled=1 from loader) - Kernel panic
> 5) no ACPI and no APIC (set both hints above from loader) - Kernel panic
> 
> 3, 4, 5 was tested with HTT enabled in BIOS.

I was able to boot successfully by removing SMP and APIC from the kernel
config and disabling ACPI with the device hint. I experience the same
problem on an ICH5 system. A kernel from Jan 4 boots just fine but
sometimes it fails to detect both SATA drives.

John, I have the dmesg still in http://www.leidinger.net/FreeBSD/, in
case you want root access to the system just speak up.

> > It is probably not bad interrupt routing.  Can you try the following scenarios 
> > and tell us which ones work and which ones fail:
> > 
> > 1) HTT + ACPI
> > 2) no HTT + ACPI
> > 3) ACPI and no apic (set hint.apic.0.disabled=1 from loader)
> > 4) no ACPI (set hint.acpi.0.disabled=1 from loader)
> > 5) no ACPI and no APIC (set both hints above from loader)

Bye,
Alexander.

-- 
           I will be available to get hired in April 2004.

http://www.Leidinger.net                       Alexander @ Leidinger.net
  GPG fingerprint = C518 BC70 E67F 143F BE91  3365 79E2 9C60 B006 3FE7



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040212124441.12d3a0aa>