Date: Fri, 3 Nov 2000 14:29:49 +0600 (NS) From: Max Khon <fjoe@iclub.nsu.ru> To: stable@freebsd.org Subject: xl0: couldn't map interrupt (again?) Message-ID: <Pine.BSF.4.21.0011031421490.15722-200000@iclub.nsu.ru>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] hi, there! after I upgraded my -stable machine from 31 Oct to 02 Nov xl0 module cannot be loaded (xl0: couldn't map interrupt) dmesg attached the problem goes away when I set irq for PCI slot with network card to 11 (default is 10 and it is shared with at least video card) /fjoe [-- Attachment #2 --] Nov 3 13:09:19 lark /kernel: Copyright (c) 1992-2000 The FreeBSD Project. Nov 3 13:09:19 lark /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Nov 3 13:09:19 lark /kernel: The Regents of the University of California. All rights reserved. Nov 3 13:09:19 lark /kernel: FreeBSD 4.2-BETA #0: Fri Nov 3 12:52:01 NOVT 2000 Nov 3 13:09:19 lark /kernel: fjoe@alf.nsk.bsgdesign.com:/usr/obj/usr/src/sys/alf Nov 3 13:09:19 lark /kernel: Timecounter "i8254" frequency 1193207 Hz Nov 3 13:09:19 lark /kernel: CPU: Pentium II/Pentium II Xeon/Celeron (525.01-MHz 686-class CPU) Nov 3 13:09:19 lark /kernel: Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Nov 3 13:09:19 lark /kernel: Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> Nov 3 13:09:19 lark /kernel: real memory = 134201344 (131056K bytes) Nov 3 13:09:19 lark /kernel: avail memory = 126910464 (123936K bytes) Nov 3 13:09:19 lark /kernel: Preloaded elf kernel "kernel" at 0xc033f000. Nov 3 13:09:19 lark /kernel: Preloaded elf module "nfs.ko" at 0xc033f09c. Nov 3 13:09:19 lark /kernel: Pentium Pro MTRR support enabled Nov 3 13:09:19 lark /kernel: apm0: <APM BIOS> on motherboard Nov 3 13:09:19 lark /kernel: apm: found APM BIOS v1.2, connected at v1.2 Nov 3 13:09:19 lark /kernel: npx0: <math processor> on motherboard Nov 3 13:09:19 lark /kernel: npx0: INT 16 interface Nov 3 13:09:19 lark /kernel: pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard Nov 3 13:09:19 lark /kernel: pci0: <PCI bus> on pcib0 Nov 3 13:09:19 lark /kernel: pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 Nov 3 13:09:19 lark /kernel: pci1: <PCI bus> on pcib1 Nov 3 13:09:19 lark /kernel: pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 10 Nov 3 13:09:19 lark /kernel: isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 Nov 3 13:09:19 lark /kernel: isa0: <ISA bus> on isab0 Nov 3 13:09:19 lark /kernel: atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0 Nov 3 13:09:19 lark /kernel: ata0: at 0x1f0 irq 14 on atapci0 Nov 3 13:09:19 lark /kernel: pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 9 Nov 3 13:09:19 lark /kernel: chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0 Nov 3 13:09:19 lark /kernel: pci0: <unknown card> (vendor=0x10b7, dev=0x9055) at 12.0 irq 10 Nov 3 13:09:19 lark /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Nov 3 13:09:19 lark /kernel: fdc0: FIFO enabled, 8 bytes threshold Nov 3 13:09:19 lark /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Nov 3 13:09:19 lark /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Nov 3 13:09:19 lark /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Nov 3 13:09:19 lark /kernel: psm0: model Generic PS/2 mouse, device ID 0 Nov 3 13:09:19 lark /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Nov 3 13:09:19 lark /kernel: kbd0 at atkbd0 Nov 3 13:09:19 lark /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Nov 3 13:09:19 lark /kernel: sc0: <System console> at flags 0x100 on isa0 Nov 3 13:09:19 lark /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Nov 3 13:09:19 lark /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Nov 3 13:09:19 lark /kernel: sio0: type 16550A Nov 3 13:09:19 lark /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Nov 3 13:09:19 lark /kernel: sio1: type 16550A Nov 3 13:09:19 lark /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Nov 3 13:09:19 lark /kernel: ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode Nov 3 13:09:19 lark /kernel: ppi0: <Parallel I/O> on ppbus0 Nov 3 13:09:19 lark /kernel: lpt0: <Printer> on ppbus0 Nov 3 13:09:19 lark /kernel: lpt0: Interrupt-driven port Nov 3 13:09:19 lark /kernel: plip0: <PLIP network interface> on ppbus0 Nov 3 13:09:19 lark /kernel: sbc0: <ESS ES1868> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0 Nov 3 13:09:19 lark /kernel: pcm1: <ESS 18xx DSP> on sbc0 Nov 3 13:09:19 lark /kernel: ad0: 10300MB <FUJITSU MPD3108AT> [20928/16/63] at ata0-master UDMA33 Nov 3 13:09:19 lark /kernel: Mounting root from ufs:/dev/ad0s1a Nov 3 13:09:19 lark /kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb000-0xb07f mem 0xe5000000-0xe500007f irq 10 at device 12.0 on pci0 Nov 3 13:09:19 lark /kernel: xl0: couldn't map interrupt Nov 3 13:09:19 lark /kernel: device_probe_and_attach: xl0 attach returned 6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0011031421490.15722-200000>