Date: Tue, 8 Mar 2011 23:47:07 +0100 From: Robert Arnesson <robert@robertarnesson.com> To: Kevin Wilcox <kevin.wilcox@gmail.com> Cc: freebsd-hardware@freebsd.org Subject: Re: FreeBSD 8.x and Dell PERC H200? Message-ID: <AANLkTikuX1%2BGZyYMpf94Docq24QSN7aN%2BotjN0nGPNZf@mail.gmail.com> In-Reply-To: <AANLkTimQzkxpqvNUFj-rMBtWgN1uq2ztyxQ%2BUk8kc2x4@mail.gmail.com> References: <AANLkTi=7%2Bte2pwMCGH4z9G6NaVkV8YFkc%2BWTP6rYJjwP@mail.gmail.com> <AANLkTikUVZTObk_bcWpbqcKYeY4C1vu9ADHru8TRJzc5@mail.gmail.com> <AANLkTimQzkxpqvNUFj-rMBtWgN1uq2ztyxQ%2BUk8kc2x4@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
A new snapshot of 8.2 worked, but only with the disks in JBOD (unconfigured). Raid0 and Raid1 does not work. /Robert On Mon, Mar 7, 2011 at 6:39 PM, Robert Arnesson <robert@robertarnesson.com>wrote: > Thanks all for your feedback so far. > > I will try a snapshot of 8.2>8.2R, with and without the disks in raid-mode, > and post the results. I can confirm that 9-current and disks in RAID1 does > not work. > > /Robert > > > On Mon, Mar 7, 2011 at 4:21 PM, Kevin Wilcox <kevin.wilcox@gmail.com>wrote: > >> On Sun, Mar 6, 2011 at 18:16, Robert Arnesson <robert@robertarnesson.com> >> wrote: >> >> > Has anyone successfully installed FreeBSD on a Dell system with any of >> the >> > newer PERC H200/700/800 cards? >> >> I can confirm 8.1-RELEASE and 8.2-RELEASE work with the H700. I have >> them installed on multiple R610s with the H700 controller in RAID5, >> RAID1 and RAID10. >> >> Write speeds are *MUCH* better for me with 8.2. >> >> kmw >> > > > > -- > Mvh / Best regards > > Robert Arnesson > -- Mvh / Best regards Robert Arnesson
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTikuX1%2BGZyYMpf94Docq24QSN7aN%2BotjN0nGPNZf>