Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 1 Nov 2018 20:01:36 -0400
From:      Mike Andrews <mandrews@bit0.com>
To:        "Andrey V. Elsukov" <bu7cher@yandex.ru>, Hans Petter Selasky <hps@selasky.org>
Cc:        freebsd-usb@freebsd.org
Subject:   Re: umodem0, Cisco USB serial console, and quirks
Message-ID:  <18d57cbe-1235-aedf-45e6-e36b495ca1eb@bit0.com>
In-Reply-To: <33f3a1f8-69d1-9240-6381-8a851beb97d0@yandex.ru>
References:  <alpine.BSF.2.21.1709191021260.34953@beast.int.bit0.com> <d9dbef0b-c22e-c7ea-34a2-f36e9e768745@selasky.org> <alpine.BSF.2.21.1709191205280.1218@beast.int.bit0.com> <0c4022f3-bd21-49b5-cadd-daeb9f1f3081@selasky.org> <alpine.BSF.2.21.1709262210180.33243@beast.int.bit0.com> <33f3a1f8-69d1-9240-6381-8a851beb97d0@yandex.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
On 11/1/18 4:59 PM, Andrey V. Elsukov wrote:

> On 27.09.2017 05:11, Mike Andrews wrote:
>>> This is the USB read transfer. The other side is not returning any
>>> data, so neither is "cu" printing anything. Maybe you can try to get a
>>> similar trace from the system where it works?
>>>
>>> Looks to me like some kind of protocol error, that the Cisco USB
>>> serial console needs some kind of activation.
>> Took me a few days to get around to getting usbmon going on Linux.  The
>> verbose dump is too large for the list, so:
>>
>>     https://www.bit0.com/tmp/usbmon-ciscoasa-verbose.txt
>>     https://www.bit0.com/tmp/usbmon-ciscoasa.txt
> Hi,
>
> did you find some solution? It seems this device still doesn't work with
> recent FreeBSD.
> I found how it should work on linux:
> https://community.cisco.com/t5/network-architecture-documents/cisco-console-connection-via-usb-serial/ta-p/3163540
>
> And it seems in Linux it is handled by generic CDC ACM driver without
> any quirks. So, I think the problem is with our umodem(4) or ucom(4)
> driver.
>
No, I didn't.

The usbmon dumps above are still there, and if someone can suggest 
anything else I can do to help, lemme know.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?18d57cbe-1235-aedf-45e6-e36b495ca1eb>