Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 28 Aug 2010 07:58:10 +0000 (UTC)
From:      "Jayachandran C." <jchandra@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r211923 - head/sys/mips/rmi
Message-ID:  <201008280758.o7S7wAXq023314@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: jchandra
Date: Sat Aug 28 07:58:10 2010
New Revision: 211923
URL: http://svn.freebsd.org/changeset/base/211923

Log:
  Initial code for XLR CompactFlash driver.
  
  Submitted by:	Sreekanth M. S. <kanthms at netlogicmicro com>

Added:
  head/sys/mips/rmi/xlr_pcmcia.c   (contents, props changed)
Modified:
  head/sys/mips/rmi/board.c
  head/sys/mips/rmi/board.h
  head/sys/mips/rmi/files.xlr
  head/sys/mips/rmi/iodi.c

Modified: head/sys/mips/rmi/board.c
==============================================================================
--- head/sys/mips/rmi/board.c	Sat Aug 28 07:24:45 2010	(r211922)
+++ head/sys/mips/rmi/board.c	Sat Aug 28 07:58:10 2010	(r211923)
@@ -88,6 +88,16 @@ struct stn_cc *xls_core_cc_configs[] = {
 
 struct xlr_board_info xlr_board_info;
 
+static int
+xlr_pcmcia_present(void)
+{
+	xlr_reg_t *mmio = xlr_io_mmio(XLR_IO_GPIO_OFFSET);
+	uint32_t resetconf;
+
+	resetconf = xlr_read_reg(mmio, 21);
+	return ((resetconf & 0x4000) != 0);
+}
+
 /*
  * All our knowledge of chip and board that cannot be detected by probing
  * at run-time goes here
@@ -103,6 +113,7 @@ xlr_board_info_setup()
 		/* Board version 8 has NAND flash */
 		xlr_board_info.cfi =
 		    (xlr_boot1_info.board_major_version != RMI_XLR_BOARD_ARIZONA_VIII);
+		xlr_board_info.ata = xlr_pcmcia_present();
 		xlr_board_info.pci_irq = 0;
 		xlr_board_info.credit_configs = xls_core_cc_configs;
 		xlr_board_info.bucket_sizes = &xls_bucket_sizes;
@@ -155,6 +166,7 @@ xlr_board_info_setup()
 		xlr_board_info.nr_cpus = 32;
 		xlr_board_info.usb = 0;
 		xlr_board_info.cfi = 1;
+		xlr_board_info.ata = xlr_pcmcia_present();
 		xlr_board_info.pci_irq = 0;
 		xlr_board_info.credit_configs = xlr_core_cc_configs;
 		xlr_board_info.bucket_sizes = &bucket_sizes;

Modified: head/sys/mips/rmi/board.h
==============================================================================
--- head/sys/mips/rmi/board.h	Sat Aug 28 07:24:45 2010	(r211922)
+++ head/sys/mips/rmi/board.h	Sat Aug 28 07:58:10 2010	(r211923)
@@ -147,7 +147,8 @@ struct xlr_board_info {
 	int is_xls;
 	int nr_cpus;
 	int usb;		/* usb enabled ? */
-	int cfi;		/* compact flash driver for NOR? */
+	int cfi;		/* NOR flash */
+	int ata;		/* PCMCIA/compactflash driver */
 	int pci_irq;
 	struct stn_cc **credit_configs;	/* pointer to Core station credits */
 	struct bucket_size *bucket_sizes;	/* pointer to Core station

Modified: head/sys/mips/rmi/files.xlr
==============================================================================
--- head/sys/mips/rmi/files.xlr	Sat Aug 28 07:24:45 2010	(r211922)
+++ head/sys/mips/rmi/files.xlr	Sat Aug 28 07:58:10 2010	(r211923)
@@ -14,6 +14,7 @@ mips/rmi/xlr_i2c.c              		option
 mips/rmi/uart_bus_xlr_iodi.c			optional uart 
 mips/rmi/uart_cpu_mips_xlr.c			optional uart 
 mips/rmi/xlr_pci.c				optional pci
+mips/rmi/xlr_pcmcia.c				optional ata
 mips/rmi/xls_ehci.c				optional usb ehci
 mips/rmi/bus_space_rmi.c			standard
 mips/rmi/bus_space_rmi_pci.c			standard

Modified: head/sys/mips/rmi/iodi.c
==============================================================================
--- head/sys/mips/rmi/iodi.c	Sat Aug 28 07:24:45 2010	(r211922)
+++ head/sys/mips/rmi/iodi.c	Sat Aug 28 07:58:10 2010	(r211923)
@@ -89,6 +89,20 @@ iodi_setup_intr(device_t, device_t, stru
 
 struct iodi_softc *iodi_softc;	/* There can be only one. */
 
+/*
+ * We will manage the Flash/PCMCIA devices in IODI for now.
+ * The NOR flash, Compact flash etc. which can be connected on 
+ * various chip selects on the peripheral IO, should have a 
+ * separate bus later.
+ */
+static void
+bridge_pcmcia_ack(int irq)
+{
+	xlr_reg_t *mmio = xlr_io_mmio(XLR_IO_FLASH_OFFSET);
+
+	xlr_write_reg(mmio, 0x60, 0xffffffff);
+}
+
 static int
 iodi_setup_intr(device_t dev, device_t child,
     struct resource *ires, int flags, driver_filter_t * filt,
@@ -112,6 +126,10 @@ iodi_setup_intr(device_t dev, device_t c
 		cpu_establish_hardintr("ehci", filt, intr, arg, PIC_USB_IRQ, flags,
 		    cookiep);
 		pic_setup_intr(PIC_USB_IRQ - PIC_IRQ_BASE, PIC_USB_IRQ, 0x1, 0);
+	} else if (strcmp(device_get_name(child), "ata") == 0) {
+		xlr_establish_intr("ata", filt, intr, arg, PIC_PCMCIA_IRQ, flags,
+		    cookiep, bridge_pcmcia_ack);
+		pic_setup_intr(PIC_PCMCIA_IRQ - PIC_IRQ_BASE, PIC_PCMCIA_IRQ, 0x1, 0);
 	}
 
 	return (0);
@@ -158,6 +176,9 @@ iodi_alloc_resource(device_t bus, device
 	} else if (strcmp(device_get_name(child), "cfi") == 0) {
 		res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1c000000);
 		res->r_bustag = 0;
+	} else if (strcmp(device_get_name(child), "ata") == 0) {
+		res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1d000000);
+		res->r_bustag = rmi_pci_bus_space;  /* byte swapping (not really PCI) */
 	}
 	/* res->r_start = *rid; */
 	return (res);
@@ -206,6 +227,9 @@ iodi_attach(device_t dev)
 	if (xlr_board_info.cfi)
 		device_add_child(dev, "cfi", 0);
 
+	if (xlr_board_info.ata)
+		device_add_child(dev, "ata", 0);
+
 	if (xlr_board_info.gmac_block[0].enabled) {
 		tmpd = device_add_child(dev, "rge", 0);
 		device_set_ivars(tmpd, &xlr_board_info.gmac_block[0]);

Added: head/sys/mips/rmi/xlr_pcmcia.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/mips/rmi/xlr_pcmcia.c	Sat Aug 28 07:58:10 2010	(r211923)
@@ -0,0 +1,149 @@
+/*-
+ * Copyright (c) 2003-2009 RMI Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of RMI Corporation, nor the names of its contributors,
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * RMI_BSD */
+/*
+ * ATA driver for the XLR_PCMCIA Host adapter on the RMI XLR/XLS/.
+ */
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/bus.h> 
+#include <sys/rman.h>
+#include <vm/uma.h>
+#include <sys/ata.h>
+#include <sys/sema.h>
+#include <sys/taskqueue.h>
+#include <sys/bus_dma.h>
+
+#include <dev/ata/ata-all.h>
+#include <mips/rmi/pic.h>
+#include <mips/rmi/iomap.h>
+#include <mips/include/resource.h>
+#include <mips/rmi/interrupt.h>
+
+#define	XLR_PCMCIA_DATA_REG		0x1f0
+#define	XLR_PCMCIA_ERROR_REG		0x1f1
+#define	XLR_PCMCIA_SECT_CNT_REG		0x1f2
+#define	XLR_PCMCIA_SECT_NUM_REG		0x1f3
+#define	XLR_PCMCIA_CYLINDER_LOW_REG	0x1f4
+#define	XLR_PCMCIA_CYLINDER_HIGH_REG	0x1f5
+#define	XLR_PCMCIA_SECT_DRIVE_HEAD_REG	0x1f6
+#define	XLR_PCMCIA_CMD_STATUS_REG	0x1f7
+#define	XLR_PCMCIA_ALT_STATUS_REG	0x3f6
+#define	XLR_PCMCIA_CONTROL_REG		0x3f6
+
+/*
+ * Device methods
+ */
+static int xlr_pcmcia_probe(device_t);
+static int xlr_pcmcia_attach(device_t);
+static int xlr_pcmcia_detach(device_t);
+
+static int
+xlr_pcmcia_probe(device_t dev)
+{
+	struct ata_channel *ch = device_get_softc(dev);
+
+	ch->unit = 0;
+	ch->flags |= ATA_USE_16BIT | ATA_NO_SLAVE ;
+	device_set_desc(dev, "PCMCIA ATA controller");
+
+	return (ata_probe(dev));
+}
+
+/*
+ * We add all the devices which we know about.
+ * The generic attach routine will attach them if they are alive.
+ */
+static int
+xlr_pcmcia_attach(device_t dev)
+{
+	struct ata_channel *ch = device_get_softc(dev);
+	int i;
+	int rid =0;
+	struct resource *mem_res;
+
+
+	mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,  RF_ACTIVE);
+	for (i = 0; i < ATA_MAX_RES; i++)
+		ch->r_io[i].res = mem_res;
+
+	/*
+	 * CF+ Specification.
+	 */
+	ch->r_io[ATA_DATA].offset 	= XLR_PCMCIA_DATA_REG;
+	ch->r_io[ATA_FEATURE].offset 	= XLR_PCMCIA_ERROR_REG;
+	ch->r_io[ATA_COUNT].offset 	= XLR_PCMCIA_SECT_CNT_REG;
+	ch->r_io[ATA_SECTOR].offset 	= XLR_PCMCIA_SECT_NUM_REG;
+	ch->r_io[ATA_CYL_LSB].offset 	= XLR_PCMCIA_CYLINDER_LOW_REG;
+	ch->r_io[ATA_CYL_MSB].offset 	= XLR_PCMCIA_CYLINDER_HIGH_REG;
+	ch->r_io[ATA_DRIVE].offset 	= XLR_PCMCIA_SECT_DRIVE_HEAD_REG;
+	ch->r_io[ATA_COMMAND].offset 	= XLR_PCMCIA_CMD_STATUS_REG;
+	ch->r_io[ATA_ERROR].offset 	= XLR_PCMCIA_ERROR_REG;
+	ch->r_io[ATA_IREASON].offset 	= XLR_PCMCIA_SECT_CNT_REG;
+	ch->r_io[ATA_STATUS].offset 	= XLR_PCMCIA_CMD_STATUS_REG;
+	ch->r_io[ATA_ALTSTAT].offset 	= XLR_PCMCIA_ALT_STATUS_REG;
+	ch->r_io[ATA_CONTROL].offset 	= XLR_PCMCIA_CONTROL_REG;
+
+	/* Should point at the base of registers. */
+	ch->r_io[ATA_IDX_ADDR].offset = XLR_PCMCIA_DATA_REG;
+
+	ata_generic_hw(dev);
+
+	return (ata_attach(dev)); 
+}
+
+static int
+xlr_pcmcia_detach(device_t dev)
+{
+	bus_generic_detach(dev);
+  
+	return (0);
+}
+
+static device_method_t xlr_pcmcia_methods[] = {
+    /* device interface */
+    DEVMETHOD(device_probe,         xlr_pcmcia_probe),
+    DEVMETHOD(device_attach,        xlr_pcmcia_attach),
+    DEVMETHOD(device_detach,        xlr_pcmcia_detach),
+
+    { 0, 0 }
+};
+
+static driver_t xlr_pcmcia_driver = {
+        "ata",
+        xlr_pcmcia_methods,
+        sizeof(struct ata_channel),
+};
+
+DRIVER_MODULE(ata, iodi, xlr_pcmcia_driver, ata_devclass, 0, 0);



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201008280758.o7S7wAXq023314>