Date: Sat, 19 Apr 2003 02:29:30 +0200 From: "Pawel Worach" <pawel.worach@telia.com> To: <mtm@FreeBSD.org> Cc: current@FreeBSD.org Subject: rc.d networking changes broken Message-ID: <000001c3060a$becab0a0$1401a8c0@corona>
next in thread | raw e-mail | index | archive | help
Hi! With the latest rc.d checkin the netif(?) script is executed twice and that makes the default route go away. Any ideas? Regards Pawel nework related rc.conf stuff: ifconfig_fxp0="inet 192.168.1.11 netmask 0xffffff00 link0" ifconfig_fxp1="inet 192.168.254.1 netmask 0xffffff00 link0" defaultrouter="192.168.1.10" gateway_enable="YES" ipv6_enable="YES" boot log: Setting hostname: darkstar. fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500 inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::290:27ff:fe8c:1e2c%fxp0 prefixlen 64 tentative scopeid 0x1 ether 00:90:27:8c:1e:2c media: Ethernet autoselect (100baseTX <full-duplex>) status: active fxp1: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500 inet 192.168.254.1 netmask 0xffffff00 broadcast 192.168.254.255 inet6 fe80::290:27ff:fe76:b0c1%fxp1 prefixlen 64 tentative scopeid 0x2 ether 00:90:27:76:b0:c1 media: Ethernet 10baseT/UTP <full-duplex> status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 add net default: gateway 192.168.1.10 Additional routing options: IP gateway=YES. add net ::ffff:0f.0.0.0: gateway x::1 add net ::0.0.0.00: gateway ::1 net.inet6.ip6.forwarding: 0 -> 0 net.inet6.ip6.iaccept_rtadv: 0 -> 1 add net fe80::: gateway ::1 add net ff02::: gateway ::1 IPv4 mapped IPv6 address support=NO - snip <rpc, nfs, ntp, ssh, sendmail, local stuff here> - Additional TCP options:. Doing initial network setup: host.conf. fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500 inet6 fe80::290:27ff:fe8c:1e2c%fxp0 prefixlen 64 scopeid 0x1 inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:90:27:8c:1e:2c media: Ethernet autoselect (100baseTX <full-duplex>) status: active fxp1: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500 inet6 fe80::290:27ff:fe76:b0c1%fxp1 prefixlen 64 scopeid 0x2 inet 192.168.254.1 netmask 0xffffff00 broadcast 192.168.254.255 ether 00:90:27:76:b0:c1 media: Ethernet 10baseT/UTP <full-duplex> status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 Starting inetd. Starting cron.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c3060a$becab0a0$1401a8c0>