Date: Thu, 7 Jan 99 21:15:47 +0100 From: Ben Stuyts <ben@stuyts.nl> To: current@FreeBSD.ORG Subject: Timedout SCB handled by another timeout Message-ID: <199901072015.VAA09302@daneel.stuyts.nl>
next in thread | raw e-mail | index | archive | help
Hello,
My SMP system was wedged with the message in the subject about 10 times on
the console. What does that mean? Is this pointing towards a hardware failure
or is it software related?
This is a Gigabyte 586DX with dual P166MMX and 64 MB ram. Below is a dmesg output.
Thanks,
Ben
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Sun Jan 3 20:59:10 MET 1999
benst@terminus.stuyts.nl:/usr/source/src/sys/compile/TERMINUS-SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX>
real memory = 67108864 (65536K bytes)
config> quit
avail memory = 62238720 (60780K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xf02e2000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
ncr0: <ncr 53c810a fast10 scsi> rev 0x12 int a irq 16 on pci0.8.0
de0: <Digital 21041 Ethernet> rev 0x11 int a irq 17 on pci0.9.0
de0: SMC 21041 [10Mb/s] pass 1.1
de0: address 00:00:c0:1f:54:e8
vga0: <S3 ViRGE VX graphics accelerator> rev 0x02 int a irq 18 on pci0.10.0
ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 19 on pci0.12.0
ahc0: Using left over BIOS settings
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 10 on isa
sio2: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM2110A>
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.13>
sbxvi0 at drq 5 on isa
snd0: <SoundBlaster 16 4.13>
sbmidi0 at 0x300 on isa
snd0: <SoundBlaster MPU-401>
awe0 at 0x620 on isa
AWE32: not detected
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM>
joy0 at 0x201 on isa
joy0: joystick
Intel Pentium detected, installing workaround for F00F bug
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
IP packet filtering initialized, divert enabled, rule-based forwarding
disabled, unlimited logging
Waiting 5 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
da1 at ahc0 bus 0 target 3 lun 0
da1: <QUANTUM TRB850S 0404> Fixed Direct Access SCSI-2 device
da1: 10.0MB/s transfers (10.0MHz, offset 8)
da1: 810MB (1660299 512 byte sectors: 64H 32S/T 810C)
changing root device to da0s1a
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <MATSHITA CD-ROM CR-506 8S05> Removable CD-ROM SCSI-2 device
cd0: 10.0MB/s transfers (10.0MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DCAS-34330W S61A> Fixed Direct Access SCSI-2 device
da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4134MB (8467200 512 byte sectors: 64H 32S/T 4134C)
WARNING: / was not properly dismounted
de0: enabling BNC port
cd1 at ahc0 bus 0 target 5 lun 0
cd1: <PHILIPS CDD2600 1.06> Removable CD-ROM SCSI-2 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Logical unit not ready,
cause not reportable
ffs_mountfs: superblock updated for soft updates
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199901072015.VAA09302>