Date: Fri, 16 May 2008 20:50:02 GMT From: "Tobias Hoellrich" <thoellri@adobe.com> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/123735: 7.0-STABLE kernerl panic "AP #1 (PHY# 1) failed!" on AMD Athlon 64 X2 Dual Core Processor 4200+ Message-ID: <200805162050.m4GKo2AB089401@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/123735; it has been noted by GNATS.
From: "Tobias Hoellrich" <thoellri@adobe.com>
To: <bug-followup@FreeBSD.org>
Cc:
Subject: Re: kern/123735: 7.0-STABLE kernerl panic "AP #1 (PHY# 1) failed!" on AMD Athlon 64 X2 Dual Core Processor 4200+
Date: Fri, 16 May 2008 13:24:02 -0700
Remko - thanks for the quick response. Here's the first chunk of
feedback: Verbose logging from the trouble maker. Again I answered
obviously "n" at the panic-prompt. The weird memory figure comes from
2GB minus 256MB for integrated graphics.
I'll get to 8-CURRENT in a while
Cheers - Tobias
FreeBSD 7.0-STABLE #0: Fri May 16 04:06:56 MDT 2008
thoellri@santafe.gateway.2wire.net:/usr/obj/usr/src/sys/SANTAFE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0db1000.
Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc0db1188.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0db1238.
Calibrating clock(s) ... i8254 clock: 1193205 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2194510455 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz
686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x60fb2 Stepping =3D 2
=20
Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=3D0x2001<SSE3,CX16>
AMD
Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=3D0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way
associative
real memory =3D 1878917120 (1791 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000006e011fff, 1828626432 bytes (446442 pages)
avail memory =3D 1828093952 (1743 MB)
Table 'FACP' at 0x6ffe3080
Table 'SSDT' at 0x6ffe7e80
Table 'HPET' at 0x6ffe80c0
Table 'SLIC' at 0x6ffe8100
Table 'MCFG' at 0x6ffe8280
Table 'APIC' at 0x6ffe7dc0
MADT: Found table at 0x6ffe7dc0
MP Configuration Table version 1.4 found at 0xc00f1f94
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: disabled
ACPI APIC Table: <ACRSYS ACRPRDCT>
AP #1 (PHY# 1) failed!
panic y/n? [y]=20
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f9f50
bios32: Entry =3D 0xfa560 (c00fa560) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xa5b0
pnpbios: Found PnP BIOS data at 0xc00fb090
pnpbios: Entry =3D f0000:b0c0 Rev =3D 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf8140/0x0024 (v 2 ACRSYS)
ACPI: RSDT @ 0x0x6ffe3000/0x003C (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD
0x00000000)
ACPI: FACP @ 0x0x6ffe3080/0x0074 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD
0x00000000)
ACPI: DSDT @ 0x0x6ffe3100/0x4CB4 (v 1 ACRSYS ACRPRDCT 0x00001000 MSFT
0x03000000)
ACPI: FACS @ 0x0x6ffe0000/0x0040
ACPI: SSDT @ 0x0x6ffe7e80/0x0206 (v 1 PTLTD POWERNOW 0x00000001 LTP
0x00000001)
ACPI: HPET @ 0x0x6ffe80c0/0x0038 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD
0x00000098)
ACPI: SLIC @ 0x0x6ffe8100/0x0176 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD
0x00000020)
ACPI: MCFG @ 0x0x6ffe8280/0x003C (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD
0x00000000)
ACPI: APIC @ 0x0x6ffe7dc0/0x0084 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD
0x00000000)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 2
MADT: Ignoring local NMI routed to ACPI CPU 3
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 16 2008
04:06:40)
npx0: INT 16 interface
acpi0: <ACRSYS ACRPRDCT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd8c18000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000903c
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D79101002)
pcibios: BIOS version 3.00
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 6fee0000 (3) failed
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/1 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
device_attach: acpi_hpet0 attach returned 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=3D0, physical bus=3D0
found-> vendor=3D0x1002, dev=3D0x7910, revid=3D0x00
domain=3D0, bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x2220, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
found-> vendor=3D0x1002, dev=3D0x7912, revid=3D0x00
domain=3D0, bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords)
lattimer=3D0x63 (2970 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x00 (0
ns)
found-> vendor=3D0x1002, dev=3D0x7917, revid=3D0x00
domain=3D0, bus=3D0, slot=3D7, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=3D0x1002, dev=3D0x4380, revid=3D0x00
domain=3D0, bus=3D0, slot=3D18, func=3D0
class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xff00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xfe00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xfd00, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xfc00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xfb00, size 4, enabled
map[24]: type Memory, range 32, base 0xfe02f000, size 10,
enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 22
found-> vendor=3D0x1002, dev=3D0x4387, revid=3D0x00
domain=3D0, bus=3D0, slot=3D19, func=3D0
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Da, irq=3D11
map[10]: type Memory, range 32, base 0xfe02e000, size 12,
enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 16
found-> vendor=3D0x1002, dev=3D0x4388, revid=3D0x00
domain=3D0, bus=3D0, slot=3D19, func=3D1
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Db, irq=3D10
map[10]: type Memory, range 32, base 0xfe02d000, size 12,
enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=3D0x1002, dev=3D0x4389, revid=3D0x00
domain=3D0, bus=3D0, slot=3D19, func=3D2
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Dc, irq=3D5
map[10]: type Memory, range 32, base 0xfe02c000, size 12,
enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
found-> vendor=3D0x1002, dev=3D0x438a, revid=3D0x00
domain=3D0, bus=3D0, slot=3D19, func=3D3
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Db, irq=3D10
map[10]: type Memory, range 32, base 0xfe02b000, size 12,
enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=3D0x1002, dev=3D0x438b, revid=3D0x00
domain=3D0, bus=3D0, slot=3D19, func=3D4
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Dc, irq=3D5
map[10]: type Memory, range 32, base 0xfe02a000, size 12,
enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
found-> vendor=3D0x1002, dev=3D0x4386, revid=3D0x00
domain=3D0, bus=3D0, slot=3D19, func=3D5
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Dd, irq=3D10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe029000, size 8,
enabled
pcib0: matched entry for 0.19.INTD
pcib0: slot 19 INTD hardwired to IRQ 19
found-> vendor=3D0x1002, dev=3D0x4385, revid=3D0x14
domain=3D0, bus=3D0, slot=3D20, func=3D0
class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0403, statreg=3D0x0230, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
map[10]: type I/O Port, range 32, base 0xb00, size 4, enabled
found-> vendor=3D0x1002, dev=3D0x438c, revid=3D0x00
domain=3D0, bus=3D0, slot=3D20, func=3D1
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0220, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Da, irq=3D255
map[20]: type I/O Port, range 32, base 0xf900, size 4, enabled
found-> vendor=3D0x1002, dev=3D0x4383, revid=3D0x00
domain=3D0, bus=3D0, slot=3D20, func=3D2
class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0410, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xfe024000, size 14,
enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=3D0x1002, dev=3D0x438d, revid=3D0x00
domain=3D0, bus=3D0, slot=3D20, func=3D3
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0220, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1002, dev=3D0x4384, revid=3D0x00
domain=3D0, bus=3D0, slot=3D20, func=3D4
class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0027, statreg=3D0x02a0, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x04 =
(1000
ns)
found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfdd00000-0xfdefffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=3D0, physical bus=3D1
found-> vendor=3D0x1002, dev=3D0x791e, revid=3D0x00
domain=3D0, bus=3D1, slot=3D5, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Da, irq=3D5
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xd0000000,
size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[18]: type Memory, range 64, base 0xfdef0000, size 16,
enabled
pcib1: requested memory range 0xfdef0000-0xfdefffff: good
map[20]: type I/O Port, range 32, base 0xde00, size 8, enabled
pcib1: requested I/O range 0xde00-0xdeff: in range
map[24]: type Memory, range 32, base 0xfdd00000, size 20,
enabled
pcib1: requested memory range 0xfdd00000-0xfddfffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem
0xd0000000-0xdfffffff,0xfdef0000-0xfdefffff,0xfdd00000-0xfddfffff irq 18
at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xe000-0xefff
pcib2: memory decode 0xfdc00000-0xfdcfffff
pcib2: prefetched decode 0xfdf00000-0xfdffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=3D0, physical bus=3D2
found-> vendor=3D0x11ab, dev=3D0x4364, revid=3D0x20
domain=3D0, bus=3D2, slot=3D0, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Da, irq=3D10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfdcfc000, size 14,
enabled
pcib2: requested memory range 0xfdcfc000-0xfdcfffff: good
map[18]: type I/O Port, range 32, base 0xee00, size 8, enabled
pcib2: requested I/O range 0xee00-0xeeff: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xee00-0xeeff mem
0xfdcfc000-0xfdcfffff irq 19 at device 0.0 on pci2
mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfdcfc000
mskc0: MSI count : 1
mskc0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 49
mskc0: using IRQ 256 for MSI
mskc0: RAM buffer size : 128KB
mskc0: Port 0 : Rx Queue 85KB(0x00000000:0x000153ff)
mskc0: Port 0 : Tx Queue 43KB(0x00015400:0x0001ffff)
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on
mskc0
msk0: bpf attached
msk0: Ethernet address: 00:1c:25:84:48:f5
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
mskc0: [MPSAFE]
mskc0: [FILTER]
atapci0: <ATI IXP600 SATA300 controller> port
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f
mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=3D0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=3D0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect time=3D0ms
ata3: SIGNATURE: eb140101
ata3: ahci_reset devices=3D0x4<ATAPI_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=3D00000000
ata4: ahci_reset devices=3D0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=3D00000000
ata5: ahci_reset devices=3D0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16
at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17
at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18
at device 19.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02c000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17
at device 19.3 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18
at device 19.4 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq
19 at device 19.5 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf900
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xfdb00000-0xfdbfffff
pcib3: prefetched decode 0xfda00000-0xfdafffff
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=3D0, physical bus=3D3
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56
fdc0: [FILTER]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58
sio1: [FILTER]
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 60
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
device_attach: acpi_hpet0 attach returned 12
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcd000-0xcdfff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata1 failed to probe at port 0x170 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 61
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 118006 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750481 hz
Timecounter "TSC" frequency 2194510455 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
ad4: 152627MB <Seagate ST3160815AS 3.AAE> at ata2-master SATA300
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth
queue
GEOM: new disk ad4
ad4: Silicon Image check3 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire
ata3: device_reset timeout=3D290us
acd0: <ATAPI DVD A DH16A3S/3A12> DVDR drive at ata3 as master
acd0: read 8269KB/s (2067KB/s) write 8269KB/s (8269KB/s), 2048KB buffer,
SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 6 to local APIC 1
ioapic0: Assigning ISA IRQ 7 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 0
msi: Assigning MSI IRQ 256 to local APIC 1
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
Linux ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805162050.m4GKo2AB089401>