Date: Tue, 17 Sep 2019 14:01:53 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-arm@FreeBSD.org Subject: [Bug 240644] RK3399 fail to boot using a GENERIC-MMCCAM 13-CURRENT kernel Message-ID: <bug-240644-7@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D240644 Bug ID: 240644 Summary: RK3399 fail to boot using a GENERIC-MMCCAM 13-CURRENT kernel Product: Base System Version: CURRENT Hardware: arm64 OS: Any Status: New Severity: Affects Many People Priority: --- Component: arm Assignee: freebsd-arm@FreeBSD.org Reporter: me@mko.io I run into the following error on my Rock Pi 4(4G) board which has RK3399 S= oC ---<<BOOT>>---=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 : The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #0 141dd35d7f1-c262723(myfreebweb)-dirty: Tue Sep 17 15:28:37 NZST 2019 root@dez:/usr/obj/obj/usr/src/arm64.aarch64/sys/GENERIC-MMCCAM arm64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. module firmware already present! Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) Starting CPU 4 (100) Starting CPU 5 (101) FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic random devi= ce because it was not yet seeded and the knob 'bypass_before_seeding' was enab= led. random: entropy device external interface MAP f4f2a000 mode 2 pages 1 MAP f4f2c000 mode 2 pages 1 MAP f7f40000 mode 2 pages 16 kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> clk_fixed0: <Fixed clock> on ofwbus0 simplebus0: <Flattened device tree simple bus> on ofwbus0 rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofw= bus0 rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0 rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760f= ff on ofwbus0 rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofw= bus0 clk_fixed1: <Fixed clock> on ofwbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 regfix2: <Fixed Regulator> on ofwbus0 regfix3: <Fixed Regulator> on ofwbus0 regfix4: <Fixed Regulator> on ofwbus0 regfix5: <Fixed Regulator> on ofwbus0 regfix6: <Fixed Regulator> on ofwbus0 simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310ff= f on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff1000= 0-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0 its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on = gic0 rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 65 on rk_pinctrl0 gpiobus0: <OFW GPIO bus> on gpio0 gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 66 on rk_pinctrl0 gpiobus1: <OFW GPIO bus> on gpio1 gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 67 on rk_pinctrl0 gpiobus2: <OFW GPIO bus> on gpio2 gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 68 on rk_pinctrl0 gpiobus3: <OFW GPIO bus> on gpio3 gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 69 on rk_pinctrl0 gpiobus4: <OFW GPIO bus> on gpio4 rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 iicbus0: <OFW I2C bus> on rk_i2c0 rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 iicbus1: <OFW I2C bus> on rk_i2c1 rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 iicbus2: <OFW I2C bus> on rk_i2c2 syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 iicbus3: <OFW I2C bus> on rk_i2c3 rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 70 on iicbus2 generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpufreq_dt0: <Generic cpufreq driver> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpufreq_dt1: <Generic cpufreq driver> on cpu1 cpu2: <Open Firmware CPU> on cpulist0 cpufreq_dt2: <Generic cpufreq driver> on cpu2 cpu3: <Open Firmware CPU> on cpulist0 cpufreq_dt3: <Generic cpufreq driver> on cpu3 cpu4: <Open Firmware CPU> on cpulist0 cpufreq_dt4: <Generic cpufreq driver> on cpu4 cpu5: <Open Firmware CPU> on cpulist0 cpufreq_dt5: <Generic cpufreq driver> on cpu5 dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xfe300000-0xfe30ffff irq = 9 on ofwbus0 miibus0: <MII bus> on dwc0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto dwc0: Ethernet address: 62:73:64:9b:21:bf rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 rockchip_dwmmc0: Hardware version ID is 270a sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0 rk_emmcphy0: got emmcclk clock sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. sdhci_fdt0: 1 slot(s) allocated mmc_alloc_device() ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0 usbus0 on ohci0 ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0 usbus1 on ohci1 iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 uart0: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0 uart0: console (1500000,n,8,1) syscon_generic0: <syscon> mem 0xffa58000-0xffa5801f on ofwbus0 syscon_generic1: <syscon> mem 0xffa5c000-0xffa5c01f on ofwbus0 syscon_generic2: <syscon> mem 0xffa60080-0xffa6009f on ofwbus0 syscon_generic3: <syscon> mem 0xffa60100-0xffa6011f on ofwbus0 syscon_generic4: <syscon> mem 0xffa60180-0xffa6019f on ofwbus0 syscon_generic5: <syscon> mem 0xffa70000-0xffa7001f on ofwbus0 syscon_generic6: <syscon> mem 0xffa70080-0xffa7009f on ofwbus0 syscon_generic7: <syscon> mem 0xffa74000-0xffa7401f on ofwbus0 syscon_generic8: <syscon> mem 0xffa76000-0xffa7601f on ofwbus0 syscon_generic9: <syscon> mem 0xffa90000-0xffa9001f on ofwbus0 syscon_generic10: <syscon> mem 0xffa98000-0xffa9801f on ofwbus0 syscon_generic11: <syscon> mem 0xffaa0000-0xffaa001f on ofwbus0 syscon_generic12: <syscon> mem 0xffaa0080-0xffaa009f on ofwbus0 syscon_generic13: <syscon> mem 0xffaa8000-0xffaa801f on ofwbus0 syscon_generic14: <syscon> mem 0xffaa8080-0xffaa809f on ofwbus0 syscon_generic15: <syscon> mem 0xffab0000-0xffab001f on ofwbus0 syscon_generic16: <syscon> mem 0xffab0080-0xffab009f on ofwbus0 syscon_generic17: <syscon> mem 0xffab8000-0xffab801f on ofwbus0 syscon_generic18: <syscon> mem 0xffac0000-0xffac001f on ofwbus0 syscon_generic19: <syscon> mem 0xffac0080-0xffac009f on ofwbus0 syscon_generic20: <syscon> mem 0xffac8000-0xffac801f on ofwbus0 syscon_generic21: <syscon> mem 0xffac8080-0xffac809f on ofwbus0 syscon_generic22: <syscon> mem 0xffad0000-0xffad001f on ofwbus0 syscon_generic23: <syscon> mem 0xffad8080-0xffad809f on ofwbus0 syscon_generic24: <syscon> mem 0xffae0000-0xffae001f on ofwbus0 syscon_generic25: <syscon> mem 0xff330000-0xff33e3d3 on ofwbus0 iicbus2: <unknown card> at addr 0x82 iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 syscon_generic26: <syscon> mem 0xff620000-0xff6200ff on ofwbus0 gpioc0: <GPIO controller> on gpio0 gpioc1: <GPIO controller> on gpio1 gpioc2: <GPIO controller> on gpio2 gpioc3: <GPIO controller> on gpio3 gpioc4: <GPIO controller> on gpio4 cryptosoft0: <software crypto> Timecounters tick every 1.000 msec mmc_dev_async(async_code=3D0x20, path_id=3D0, target_id=3D0, lun_id=3D0 Got AC_PATH_REGISTERED -- whatever... mmc_dev_async(async_code=3D0x20, path_id=3D0, target_id=3Dffffffff, lun_id= =3Dffffffff usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 (noperiph:sdhci_slot0:0:-1:ffffffff): XPT_SCAN_{BUS,TGT,LUN} (noperiph:sdhci_slot0:0:0:0): XPT_SCAN_{BUS,TGT,LUN} (noperiph:sdhci_slot0:0:0:0): Set up the mmcprobe device... (mmcprobe0:sdhci_slot0:0:0:0): Periph created (mmcprobe0:sdhci_slot0:0:0:0): Probe started (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_INVALID to PROBE_RESET (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_RESET sdhci_fdt0-slot0: Clock =3D> 0 sdhci_fdt0-slot0: VDD =3D> 7 sdhci_fdt0-slot0: CS =3D> 0 sdhci_fdt0-slot0: Bus width =3D> 0 sdhci_fdt0-slot0: Power mode =3D> 1 sdhci_fdt0-slot0: Bus mode =3D> 1 sdhci_fdt0-slot0: sdhci_cam_update_ios: power_mode=3D1, clk=3D0, bus_width= =3D0, timing=3D0 ugen1.1: <Generic OHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <Generic OHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 sdhci_fdt0-slot0: Clock =3D> 399193 sdhci_fdt0-slot0: Power mode =3D> 2 sdhci_fdt0-slot0: Timing =3D> 0 sdhci_fdt0-slot0: sdhci_cam_update_ios: power_mode=3D2, clk=3D399193, bus_w= idth=3D0, timing=3D0 sdhci_fdt0-slot0: CS =3D> 1 sdhci_fdt0-slot0: sdhci_cam_update_ios: power_mode=3D2, clk=3D399193, bus_w= idth=3D0, timing=3D0 (mmcprobe0:sdhci_slot0:0:0:0): Send first XPT_MMC_IO (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done Starting completion of PROBE_RESET (mmcprobe0:sdhci_slot0:0:0:0): done with PROBE_RESET (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_RESET to PROBE_SEND_IF_COND (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SEND_IF_COND mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): IF_COND: error 1, pattern 00000000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_IF_COND to PROBE_SDIO_RESET (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_RESET mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): SDIO_RESET: error 1, CCCR CTL register: 0000= 0000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SDIO_RESET to PROBE_SDIO_INIT (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_INIT mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): SDIO_INIT: error 1, 00000000 00000000 000000= 00 00000000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SDIO_INIT to PROBE_SEND_APP_OP_C= OND (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): APP_OP_COND: error 1, resp 00000000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_APP_OP_COND to PROBE_MMC_IN= IT (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_MMC_INIT mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): MMC card, OCR 40ff8080 (mmcprobe0:sdhci_slot0:0:0:0): -> sending OCR to card (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_MMC_INIT mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): MMC card, OCR 40ff8080 cprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_MMC_INIT mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): MMC card, OCR c0ff8080 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_MMC_INIT to PROBE_GET_CID (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): CID 8801034e436172642017a5f68b425500 (mmcprobe0:sdhci_slot0:0:0:0): uhub1: 1 port with 1 removable, self powered uhub0: 1 port with 1 removable, self powered Probe PROBE_GET_CID to PROBE_MMC_SET_RELATIVE_ADDR (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_MMC_SET_RELATIVE_ADDR to PROBE_GET_CSD (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start mmc_probedone: remaining freezecnt 1 Release APs...(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): CSD d0ffff320f5903ffffffffe796400000 (mmcprobe0:sdhci_slot0:0:0:0): done Probe PROBE_GET_CSD to PROBE_SELECT_CARD (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start mmc_probedone: remaining freezecnt 1 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SELECT_CARD to PROBE_DONE (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_DONE sdhci_fdt0-slot0: Bus mode =3D> 2 CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 sdhci_fdt0-slot0: sdhci_cam_update_ios: power_mode=3D2, clk=3D399193, bus_w= idth=3D0, timing=3D0 Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL> Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... mmc_probedone: remaining freezecnt 0 Instruction Set Attributes 1 =3D <> mountroot: waiting for device /dev/mmcsd0s2a... (mmcprobe0:sdhci_slot0:0:0:0): Periph invalidated Processor Features 0 =3D <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,E= L0 32> (mmcprobe0:sdhci_slot0:0:0:0): Periph destroyed Processor Features 1 =3D <0> (noperiph:sdhci_slot0:0:0:0): Memory Model Features 0 =3D <4k Granule= ,64k Granule,S/NS Mem,MixedEndian,16bit ASID,1TB PA> xpt_async(AC_FOUND_DEVICE) Memory Model Features 1 =3D <> mmc_dev_async(async_code=3D0x80, path_id=3D0, target_id=3D0, lun_id=3D0 Memory Model Features 2 =3D <32b CCIDX,48b VA> Got AC_FOUND_DEVICE -- whatever... Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8> (pass0:sdhci_slot0:0:0:0): Periph created Debug Features 1 =3D <0> Auxiliary Features 0 =3D <0> Auxiliary Features 1 =3D <0> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,1TB PA> (sdda0:sdhci_slot0:0:0:0): CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 Periph created Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,1TB PA> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,1TB PA> CPU 4: ARM Cortex-A72 r0p2 affinity6bit ASID,16TB PA> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,16TB PA> WARNING: WITNESS option enabled, expect reduced performance. (sdda0:sdhci_slot0:0:0:0): Capacity: 31037849600, sectors: 60620800 (sdda0:sdhci_slot0:0:0:0): Set SD freq to 52 MHz (min out of host f=3D198 M= Hz and card f=3D52 MHz) sdhci_fdt0-slot0: Timing =3D> 1 sdhci_fdt0-slot0: sdhci_cam_update_ios: power_mode=3D2, clk=3D399193, bus_w= idth=3D0, timing=3D1 sdhci_fdt0-slot0: Clock =3D> 49500000 sdhci_fdt0-slot0: sdhci_cam_update_ios: power_mode=3D2, clk=3D49500000, bus_width=3D0, timing=3D1 (sdda0:sdhci_slot0:0:0:0): Set bus width to 8-bit (min of host 8-bit and ca= rd 8-bit) sdhci_fdt0-slot0: Bus width =3D> 3 sdhci_fdt0-slot0: sdhci_cam_update_ios: power_mode=3D2, clk=3D49500000, bus_width=3D3, timing=3D1 (sdda0:sdhci_slot0:0:0:0): Partition type 'default', size 31037849600=20 uma_zalloc_arg: zone "128" with the following non-sleepable locks held: exclusive sleep mutex CAM device lock (CAM device lock) r =3D 0 (0xfffffd0000ff64d0) locked @ /usr/src/sys/cam/mmc/mmc_da.c:1103 stack backtrace: #0 0xffff0000004670d4 at witness_debugger+0x64 #1 0xffff0000004680cc at witness_warn+0x3dc #2 0xffff0000006b6438 at uma_zalloc_arg+0x44 #3 0xffff0000003da168 at malloc+0x9c #4 0xffff0000000428d0 at sdda_add_part+0xf4 #5 0xffff00000004249c at sdda_start_init_task+0x1778 #6 0xffff00000045a758 at taskqueue_run_locked+0xe8 #7 0xffff00000045b728 at taskqueue_thread_loop+0x9c #8 0xffff0000003c0e90 at fork_exit+0x7c (sdda0:sdhci_slot0:0:0:0): Partition type 'boot0', size 4194304=20 uma_zalloc_arg: zone "128" with the following non-sleepable locks held: exclusive sleep mutex CAM device lock (CAM device lock) r =3D 0 (0xfffffd0000ff64d0) locked @ /usr/src/sys/cam/mmc/mmc_da.c:1554 stack backtrace: #0 0xffff0000004670d4 at witness_debugger+0x64 #1 0xffff0000004680cc at witness_warn+0x3dc #2 0xffff0000006b6438 at uma_zalloc_arg+0x44 #3 0xffff0000003da168 at malloc+0x9c #4 0xffff0000000428d0 at sdda_add_part+0xf4 #5 0xffff000000042628 at sdda_start_init_task+0x1904 #6 0xffff00000045a758 at taskqueue_run_locked+0xe8 #7 0xffff00000045b728 at taskqueue_thread_loop+0x9c #8 0xffff0000003c0e90 at fork_exit+0x7c (sdda0:sdhci_slot0:0:0:0): Partition type 'boot1', size 4194304=20 uma_zalloc_arg: zone "128" with the following non-sleepable locks held: exclusive sleep mutex CAM device lock (CAM device lock) r =3D 0 (0xfffffd0000ff64d0) locked @ /usr/src/sys/cam/mmc/mmc_da.c:1554 stack backtrace: #0 0xffff0000004670d4 at witness_debugger+0x64 #1 0xffff0000004680cc at witness_warn+0x3dc #2 0xffff0000006b6438 at uma_zalloc_arg+0x44 #3 0xffff0000003da168 at malloc+0x9c #4 0xffff0000000428d0 at sdda_add_part+0xf4 #5 0xffff00000004264c at sdda_start_init_task+0x1928 #6 0xffff00000045a758 at taskqueue_run_locked+0xe8 #7 0xffff00000045b728 at taskqueue_thread_loop+0x9c #8 0xffff0000003c0e90 at fork_exit+0x7c (sdda0:sdhci_slot0:0:0:0): Partition type 'RPMB', size 4194304=20 uma_zalloc_arg: zone "128" with the following non-sleepable locks held: exclusive sleep mutex CAM device lock (CAM device lock) r =3D 0 (0xfffffd0000ff64d0) locked @ /usr/src/sys/cam/mmc/mmc_da.c:1554 stack backtrace: #0 0xffff0000004670d4 at witness_debugger+0x64 #1 0xffff0000004680cc at witness_warn+0x3dc #2 0xffff0000006b6438 at uma_zalloc_arg+0x44 #3 0xffff0000003da168 at malloc+0x9c #4 0xffff0000000428d0 at sdda_add_part+0xf4 #5 0xffff00000004267c at sdda_start_init_task+0x1958 #6 0xffff00000045a758 at taskqueue_run_locked+0xe8 #7 0xffff00000045b728 at taskqueue_thread_loop+0x9c #8 0xffff0000003c0e90 at fork_exit+0x7c (sdda0:sdhci_slot0:0:0:0): Don't know what to do with RPMB partitions yet sdda0 at sdhci_slot0 bus 0 scbus0 target 0 lun 0 sdda0: Relative addr: 00000002 Card features: <MMC Memory High-Capacity > Card memory OCR: 40ff8080 sdda0: Serial Number A5F68B4 (sdda0:sdhci_slot0:0:0:0): m4F60, ... sdda0: MMCHC NCard 1.7 SN A5F68B42 MFG 05/2002 by 136 0x0003 (sdda0:sdhci_slot0:0:0:0): Partition 0 -> 1 (sdda0:sdhci_slot0:0:0:0): Partition 1 -> 2 (sdda0:sdhci_slot0:0:0:0): Partition 2 -> 0 Mounting from ufs:/dev/mmcsd0s2a failed with error 19. Loader variables: vfs.root.mountfrom=3Dufs:/dev/mmcsd0s2a vfs.root.mountfrom.options=3Drw,noatime Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:zroot/ROOT/default cd9660:/dev/cd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> random: unblocking device. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-240644-7>