Date: Sun, 26 Sep 1999 16:08:48 -0400 From: "Donald J . Maddox" <dmaddox@conterra.com> To: "D. Rock" <rock@dead-end.net> Cc: current@FreeBSD.ORG Subject: Re: Loss of Functionality with newpnp Message-ID: <19990926160848.A483@dmaddox.conterra.com> In-Reply-To: <37EE7C56.5A784192@dead-end.net> References: <19990926034143.A510@dmaddox.conterra.com> <37EE7C56.5A784192@dead-end.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks. That is exactly what I have done. The AWE device cannot work this way, but everything else is functional if I remove the PnP controller from my kernel... On Sun, Sep 26, 1999 at 10:04:38PM +0200, D. Rock wrote: > "Donald J . Maddox" schrieb: > > Is the new PnP code really so smart that it has no use for user intervention > > ever? My experience indicates that it is not. > > > > It would be very nice if the architects of the new PnP code would add back > > this lost functionality. > My (Q&D) solution for this problem: > > Get rid of > controller pnp0 > in your config-file. > > Write down the Port/IRQ/DMA of all your PnP cards, then configure them > the > hard way (they normally don't change between reboots). > > This was my solution to get my PnP ISDN card working again (i4b isn't > yet > converted to newPnP). As a side effect I also had to manually configure > my NE2000 compatible PnP card manually. > > Before > --- > controller pnp0 > device ed0 > device isic0 > -- > ed0: <NE2000 Compatible> at port 0x220-0x23f irq 3 on isa0 > ed0: address 00:40:05:38:7b:a4, type NE2000 (16 bit) > unknown3: <speed win SEDLBAUER AG> at port 0x108-0x10f irq 11 on isa0 > > After > --- > device ed0 at isa? port 0x220 irq 3 > device isic0 at isa? port 0x108 irq 11 flags 9 > -- > ed0 at port 0x220-0x23f irq 3 on isa0 > ed0: address 00:40:05:38:7b:a4, type NE2000 (16 bit) > isic0 at port 0x108 irq 11 flags 0x9 on isa0 > isic0: Sedlbauer WinSpeed > isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) > (Addr=0x10a) > isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x10b, AddrB=0x10d) > > The ISDN card needed some additional tweaking, since it a PnP only card > and > isn't expected to run as a non-PnP card, but the sound driver should be > just > like the ed driver. > > > Daniel > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990926160848.A483>