Date: Mon, 18 Dec 2000 14:35:43 +0000 From: Jamie Heckford <heckfordj@psi-domain.co.uk> Cc: freebsd-hackers@freebsd.org Subject: Re: Message-ID: <20001218143543.C593@freefire.psi-domain.co.uk> In-Reply-To: <78784D0E83CDD411BB580000D11ABE920C88BA@btcexc01.btc.adaptec.com>; from scott_long@btc.adaptec.com on Mon, Dec 18, 2000 at 13:10:52 %2B0000 References: <78784D0E83CDD411BB580000D11ABE920C88BA@btcexc01.btc.adaptec.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Yes, after a cold boot.
The machine is dual boot Windows ME (came with the laptop, need it for
DVD!!)
The output of dmesg is below - should I turn of Plug and Play in the BIOS?
Dmesg
-----
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #2: Sun Dec 17 14:03:20 GMT 2000
jamie@freefire.psi-domain.co.uk:/usr/src/sys/compile/FREEFIRE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (551.25-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 127475712 (124488K bytes)
Preloaded elf kernel "kernel" at 0xc031f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031f09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 1.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1040-0x104f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at
device 7.3 on pci0
pcic-pci0: <Ricoh RL5C478 PCI-CardBus Bridge> irq 0 at device 8.0 on pci0
pcic-pci1: <Ricoh RL5C478 PCI-CardBus Bridge> irq 0 at device 8.1 on pci0
pci0: <unknown card> (vendor=0x125d, dev=0x199a) at 12.0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1000-0x103f mem
0xe8000000-0xe80fffff,0xe8100000-0xe8100fff irq 11 at device 13.0 o
n pci0
fxp0: Ethernet address 00:00:f0:65:cf:ef
pci0: <unknown card> (vendor=0x11c1, dev=0x0444) at 13.1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
On 2000.12.18 13:10:52 +0000 "Long, Scott" wrote:
> Very odd. Did this happen after a cold boot of the machine? Are you
> running any other OS's? It might help if you could send the output of
> dmesg.
>
> Scott
>
> -----Original Message-----
> From: heckfordj@psi-domain.co.uk
> Sent: 12/17/00 6:33 AM
>
> Hi,
>
> I got hold of you driver, compiled and installed it.
>
> After booting, I logged in as root and typed:
>
> # kldload snd_maestro3
>
> but this returned the following error message:
>
> pcm0: <ESS Technology Maestro3> at device 12.0 on pci0
> pcm0: Unable to map i/o space
> device_probe_and_attach: pcm0 attach returned 6
>
> Any ideas on what I am doing wrong??
>
> Any help appreciated
>
> Jamie
>
> On 2000.12.15 16:47:16 +0000 "Long, Scott" wrote:
> > Myself and Darrell Anderson are working on a driver. Check out
> > http://people.freebsd.org/~scottl/maestro3 for mine or
> > http://www.cs.duke.edu/~anderson/freebsd/maestro3xxx for his. The PCI
> id
> > mentioned by the original poster (0x199a125d) is supported by this
> > driver,
> > though I haven't tested it.
> >
> > > -----Original Message-----
> > > From: Michel Talon [mailto:michel@lpthe.jussieu.fr]
> > > Sent: Friday, December 15, 2000 9:42 AM
> > > To: freebsd-stable@freebsd.org
> > > Subject: Re: ESS Sound Driver
> > >
> > >
> > > On Fri, Dec 15, 2000 at 04:10:09PM +0000, Jamie Heckford wrote:
> > > > Hi,
> > > >
> > > > Could anyone offer any guidance on getting the following
> > > sound card to work?
> > > >
> > > > It is in a Samsung GT8700 laptop - and I am using FreeBSD
> > > 4.2-RELEASE.
> > > >
> > > > Windows identifies the card as an ESS Maestro PCI Audio
> > > (WDM) - IRQ 5
> > > >
> > > I have seen recently a HP laptop with a maestro 3 audio
> > > card. I have been
> > > able to run the sound card only with the Alsa drivers under Linux.
> > > Apparently the FreeBSD drivers are able to run only the
> > > maestro 2 and 2E.
> > >
> > > --
> > > Michel Talon
> > >
> > >
> > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > with "unsubscribe freebsd-stable" in the body of the message
> > >
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-stable" in the body of the message
> >
> >
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001218143543.C593>