Date: Fri, 5 Sep 2014 21:22:28 +0200 From: Oliver Pinter <oliver.pntr@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Intel Centrino Wireless-N 2230 status Message-ID: <CAPjTQNGwWHZebYdKpN0-X7aY87kOrRsu9eN81euB-QE5oALUdA@mail.gmail.com> In-Reply-To: <CAPjTQNGAD9QsVzQ9tO8e=G3aFKqJ8a1JeeCT%2BxPmWDqtVQQzqw@mail.gmail.com> References: <CAPjTQNGGoM4EYQw%2BNjScQEXeQUgttuxM9PWPL0dMpn5j=z5F7Q@mail.gmail.com> <CAJ-Vmo=ktO2iaSe_q41F8CuO0EoA52Y-7LDKzsmfOtTFP%2Bgnvw@mail.gmail.com> <CAPjTQNFKKRKGDj_D4KQfdT8k5DECsvakc230dnw0Yoo4DS5Lxw@mail.gmail.com> <CAJ-Vmonp-3Zbmdvr%2BQ67nfvUkvxvwzYdy=8fO6rEH1-b3wf0mw@mail.gmail.com> <CAPjTQNGWqX5ic9v6X_YKd03efBEEa1WJKM8nEtN9dHZn2BuPzg@mail.gmail.com> <CAPjTQNGAD9QsVzQ9tO8e=G3aFKqJ8a1JeeCT%2BxPmWDqtVQQzqw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I got the attached iwn panic, even if running in -ht mode. In between I have a working connection. I set up now a serial console and try to enable the ht mode with debugging. On 9/3/14, Oliver Pinter <oliver.pntr@gmail.com> wrote: > Or not, I forgot the -ht option in rc.conf. > > G STA + G AP = ok > G STA + N AP = ok > N STA + N AP = fail > > On 9/3/14, Oliver Pinter <oliver.pntr@gmail.com> wrote: >> Hi! >> >> Small status update: >> The mode N works too, I mistyped the other AP's passwork. >> So both mode G and mode N working after the backports. >> >> BTW, can you MFC the same changes to 10.1? >> >> On 9/2/14, Adrian Chadd <adrian@freebsd.org> wrote: >>> Hi, >>> >>> Compile it with IWN_DEBUG, then >>> >>> sysctl dev.iwn.0.debug=0x1 >>> >>> >>> -a >>> >>> >>> On 2 September 2014 12:41, Oliver Pinter <oliver.pntr@gmail.com> wrote: >>>> I not tried freebsd-head yet, but I'm able today. In mode N seems like >>>> the NIC sends only one frame, and no more. >>>> >>>> With tcpdump and/or wlandebug I see only rx packets and no tx. >>>> >>>> If you add some pointer what changes must I create to easier debug, or >>>> what concrete information required, feel free to ping me or send the >>>> details. >>>> >>>> On 9/2/14, Adrian Chadd <adrian@freebsd.org> wrote: >>>>> Cool! Have you tried freebsd-head? Does it work there? >>>>> >>>>> How's it failing in association state? What's it saying? >>>>> >>>>> >>>>> -a >>>>> >>>>> >>>>> On 2 September 2014 12:30, Oliver Pinter <oliver.pntr@gmail.com> >>>>> wrote: >>>>>> Hi All! >>>>>> >>>>>> After I backported all of the net80211 and iwn changes from >>>>>> 11-CURRENT >>>>>> to 10-STABLE the wireless NIC in subject working on mode G. If I try >>>>>> to use with mode N (ht20, ht40) it failed in association state. >>>>>> >>>>>> All of the backports are in this github repo: >>>>>> >>>>>> https://github.com/opntr/opBSD/commits/op/stable/10-iwn-backport >>>>>> >>>>>> Oliver >>>>> >>> >> > [-- Attachment #2 --] Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #1 8ed4898(hardened/current/master)-dirty: Fri Sep 5 20:40:52 CEST 2014 root@pandora-test:/usr/obj/usr/data/source/git/opBSD/hardenedBSD.git/sys/OP-ASLR amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 WARNING: WITNESS option enabled, expect reduced performance. [PAX ASLR] status: opt-out [PAX ASLR] mmap: 21 bit [PAX ASLR] exec base: 21 bit [PAX ASLR] stack: 16 bit [PAX ASLR (compat)] status: opt-out [PAX ASLR (compat)] mmap: 8 bit [PAX ASLR (compat)] exec base: 6 bit [PAX ASLR (compat)] stack: 6 bit [PAX HARDENING] MAP_32BIT enabled: 1 [PAX LOG] logging to system: 0 [PAX LOG] logging to user: 0 CPU: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz (3392.22-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8221806592 (7840 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended) ioapic0 <Version 2.0> irqs 0-23 on motherboard random: <Software, Yarrow> initialized kbd1 at kbdmux0 aesni0: <AES-CBC,AES-XTS> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 67, 1 (4) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7e20000-0xf7e3ffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <ATI RV810 HDA Controller> mem 0xf7e40000-0xf7e43fff irq 17 at device 0.1 on pci1 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f20000-0xf7f2ffff irq 16 at device 20.0 on pci0 xhci0: 32 byte context size. xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms> at device 22.0 (no driver attached) uart2: <Intel Lynx Point KT Controller> port 0xf0a0-0xf0a7 mem 0xf7f3a000-0xf7f3afff irq 19 at device 22.3 on pci0 em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf040-0xf05f mem 0xf7f00000-0xf7f1ffff,0xf7f39000-0xf7f39fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 94:de:80:XX:XX:XX ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f38000-0xf7f383ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f30000-0xf7f33fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network, ethernet> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 iwn0: <Intel Centrino Wireless-N 2230> mem 0xf7c00000-0xf7c01fff irq 16 at device 0.0 on pci4 ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f37000-0xf7f373ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7f36000-0xf7f367ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 Timecounters tick every 10.000 msec ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC892 HDA CODEC> at cad 2 on hdac1 hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen1.1: <Intel> at usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <0x8086> at usbus0 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Hitachi HDP725050GLA360 GM4OA52A> ATA-8 SATA 2.x device ada0: Serial Number GEA530RF0KSB4A ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <TOSHIBA DT01ACA100 MS2OA750> ATA-8 SATA 3.x device ada1: Serial Number 14RRB37NS ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad1 pass2 at ahciem0 bus 0 scbus6 target 0 lun 0 pass2: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1696109952 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub1: 21 ports with 21 removable, self powered Root mount waiting for: usbus2 usbus1 usbus0 xhci0: Port routing mask set to 0x00000000 usb_alloc_device: device init 2 failed (USB_ERR_IOERROR, ignored) ugen0.2: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 ugen1.3: <Microsoft> at usbus1 ukbd0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 3> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus1 ugen1.4: <Logitech> at usbus1 ukbd1: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 4> on usbus1 kbd3 at ukbd1 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 4> on usbus1 ums0: 10 buttons and [XYZT] coordinates ID=2 Root mount waiting for: usbus1 ugen1.5: <vendor 0x8087> at usbus1 Trying to mount root from ufs:/dev/ufs/testROOT [rw]... Setting hostuuid: 20c0001e-8c00-014b-b6e1-002215126150. Setting hostid: 0xb5b71a6d. Entropy harvesting: interrupts ethernet point_to_point swi. Starting file system checks: /dev/ufs/testROOT: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/testROOT: clean, 228050 free (1602 frags, 28306 blocks, 0.3% fragmentation) /dev/ufs/testTMP: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/testTMP: clean, 2538036 free (60 frags, 317247 blocks, 0.0% fragmentation) /dev/ufs/testUSR: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/testUSR: clean, 5498643 free (106347 frags, 674037 blocks, 0.5% fragmentation) /dev/ufs/testVAR: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/testHOME: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/testVAR: clean, 2244422 free (886 frags, 280442 blocks, 0.0% fragmentation) /dev/ufs/testHOME: clean, 9988431 free (41495 frags, 1243367 blocks, 0.2% fragmentation) Mounting local file systems:. Loading kernel modules: Writing entropy file:. Setting hostname: pandora-test. wlan0: Ethernet address: 60:6c:66:XX:XX:XX iwn0: iwn_read_firmware: ucode rev=0x12a80601 Starting wpa_supplicant. Starting dhclient. wlan0: no link ... iwn0: iwn_read_firmware: ucode rev=0x12a80601 got link DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 10.0.0.1 bound to 10.0.0.100 -- renewal in 3600 seconds. Starting Network: lo0 em0 iwn0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> em0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 94:de:80:XX:XX:XX nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 60:6c:66:XX:XX:XX nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated Starting devd. Starting Network: em0. em0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 94:de:80:XX:XX:XX nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Configuring keyboard: keymap keyrate. kldload: can't load uhid: No such file or directory Starting ums0 moused. kldload: can't load ng_ubt: No such file or directory kldload: can't load ng_ubt: No such file or directory add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Flushed all rules. 00100 allow ip from any to any via lo0 00200 deny ip from any to 127.0.0.0/8 00300 deny ip from 127.0.0.0/8 to any 00400 deny ip from any to ::1 00500 deny ip from ::1 to any 00600 allow ipv6-icmp from :: to ff02::/16 00700 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 deny ip from any to any not verrevpath in 01200 deny ip from any to any not antispoof in 01300 check-state 01400 allow tcp from me to any established 01500 allow tcp from me to any setup keep-state 01600 allow udp from me to any keep-state 01700 allow icmp from me to any keep-state 01800 allow ipv6-icmp from me to any keep-state 01900 allow udp from 0.0.0.0 68 to 255.255.255.255 dst-port 67 out 02000 allow udp from any 67 to me dst-port 68 in 02100 allow udp from any 67 to 255.255.255.255 dst-port 68 in 02200 allow udp from fe80::/10 to me dst-port 546 in 02300 allow icmp from me to any icmptypes 8 02400 allow ipv6-icmp from me to any ip6 icmp6types 128,129 02500 allow icmp from any to any icmptypes 3,4,11 02600 allow ipv6-icmp from any to any ip6 icmp6types 3 65000 count ip from any to any 65100 deny { tcp or udp } from any to any dst-port 135-139,445 in 65200 deny { tcp or udp } from any to any dst-port 1026,1027 in 65300 deny { tcp or udp } from any to any dst-port 1433,1434 in 65400 deny ip from any to 255.255.255.255 65500 deny ip from any to 224.0.0.0/24 in 65500 deny udp from any to any dst-port 520 in 65500 deny tcp from any 80,443 to any dst-port 1024-65535 in 65500 deny log logamount 500 ip from any to any Firewall rules loaded. Firewall logging enabled. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/event2 /usr/local/lib/gcc47 /usr/local/lib/gcc49 /usr/local/lib/nss /usr/local/llvm-devel/lib /usr/local/llvm33/lib 32-bit compatibility ldconfig path: /usr/lib32 Creating and/or trimming log files. Starting syslogd. Setting date via ntp. 5 Sep 20:46:35 ntpdate[58058]: step time server 148.6.0.1 offset -0.648702 sec No core dumps found. Starting auditd. lock order reversal: 1st 0xfffffe01edc65b18 bufwait (bufwait) @ /usr/data/source/git/opBSD/hardenedBSD.git/sys/kern/vfs_bio.c:3090 2nd 0xfffff80010925600 dirhash (dirhash) @ /usr/data/source/git/opBSD/hardenedBSD.git/sys/ufs/ufs/ufs_dirhash.c:284 KDB: stack backtrace: Clearing /tmp. db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0237ac2280 kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe0237ac2330 witness_checkorder() at witness_checkorder+0xddd/frame 0xfffffe0237ac23b0 _sx_xlock() at _sx_xlock+0x71/frame 0xfffffe0237ac23f0 ufsdirhash_add() at ufsdirhash_add+0x3a/frame 0xfffffe0237ac2430 ufs_direnter() at ufs_direnter+0x6a0/frame 0xfffffe0237ac24f0 ufs_makeinode() at ufs_makeinode+0x561/frame 0xfffffe0237ac26a0 VOP_CREATE_APV() at VOP_CREATE_APV+0xcb/frame 0xfffffe0237ac26d0 vn_open_cred() at vn_open_cred+0x2eb/frame 0xfffffe0237ac2820 kern_openat() at kern_openat+0x26d/frame 0xfffffe0237ac29a0 amd64_syscall() at amd64_syscall+0x22e/frame 0xfffffe0237ac2ab0 Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0237ac2ab0 --- syscall (5, FreeBSD ELF64, sys_open), rip = 0x94e02a9da, rsp = 0x7ffffffbb1a8, rbp = 0x7ffffffbb620 --- Starting dnsmasq. Sep 5 20:46:35 pandora-test dnsmasq[67786]: bad address at /etc/hosts line 1 Updating motd:. Mounting late file systems:. Starting privoxy. Performing sanity check on nginx configuration: nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful Starting nginx. Configuring syscons: keymap keyrate blanktime. Performing sanity check on sshd configuration. Starting sshd. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Starting background file system checks in 60 seconds. Fri Sep 5 20:46:38 CEST 2014 wlan0: link state changed to DOWN wlan0: link state changed to UP iwn0: device timeout iwn0: iwn_read_firmware: ucode rev=0x12a80601 iwn0: iwn_intr: fatal firmware error firmware error log: error type = "UNKNOWN" (0x0000102C) program counter = 0x0000D978 source line = 0x000006A4 error data = 0x000000FE00000000 branch link = 0x0000D88A0000D88A interrupt link = 0x0000EC7A00000000 time = 342713 driver status: tx ring 0: qid=0 cur=1 queued=1 tx ring 1: qid=1 cur=0 queued=0 tx ring 2: qid=2 cur=0 queued=0 tx ring 3: qid=3 cur=0 queued=0 tx ring 4: qid=4 cur=0 queued=0 tx ring 5: qid=5 cur=0 queued=0 tx ring 6: qid=6 cur=0 queued=0 tx ring 7: qid=7 cur=0 queued=0 tx ring 8: qid=8 cur=0 queued=0 tx ring 9: qid=9 cur=28 queued=0 tx ring 10: qid=10 cur=0 queued=0 tx ring 11: qid=11 cur=0 queued=0 tx ring 12: qid=12 cur=0 queued=0 tx ring 13: qid=13 cur=0 queued=0 tx ring 14: qid=14 cur=0 queued=0 tx ring 15: qid=15 cur=0 queued=0 tx ring 16: qid=16 cur=0 queued=0 tx ring 17: qid=17 cur=0 queued=0 tx ring 18: qid=18 cur=0 queued=0 tx ring 19: qid=19 cur=0 queued=0 rx ring: cur=8 iwn0: iwn_panicked: controller panicked, iv_state = 5; resetting... iwn0: iwn_read_firmware: ucode rev=0x12a80601
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPjTQNGwWHZebYdKpN0-X7aY87kOrRsu9eN81euB-QE5oALUdA>