Date: Thu, 24 Jul 2003 12:20:19 -0700 (PDT) From: Jack Patton <jackp@flag.60north.net> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/53566: IBM Eserver (245 || 345) + ServeRaid 5i ips driver panic Message-ID: <200307241920.h6OJKJC0011637@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/53566; it has been noted by GNATS. From: Jack Patton <jackp@flag.60north.net> To: <jackp@flag.60north.net>, <FreeBSD-gnats-submit@freebsd.org>, <freebsd-bugs@freebsd.org>, <freebsd-scsi@freebsd.org> Cc: <scottl@freebsd.org> Subject: Re: kern/53566: IBM Eserver (245 || 345) + ServeRaid 5i ips driver panic Date: Thu, 24 Jul 2003 19:11:11 -0000 No good with the 0708 snap. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20030708-JPSNAP #0: Tue Jul 8 00:26:27 GMT 2003 root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b65000. Preloaded mfs_root "/boot/mfsroot" at 0xc0b65278. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b652bc. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2793894552 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.89-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 526385152 (502 MB) avail memory = 499220480 (476 MB) Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06e1068 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM SERONYXP> on motherboard pcibios: BIOS version 2.10 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 9 INTA is routed to irq 10 pcib0: slot 15 INTA is routed to irq 11 pci0: <display, VGA> at device 9.0 (no driver attached) atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x700-0x70f,0x374- 0x377,0x17 0-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: simplex device, DMA on primary only ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at devic e 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isab0: <PCI-ISA bridge> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib1 pcib1: slot 8 INTA is routed to irq 3 bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfbff0000- 0xfb ffffff irq 3 at device 8.0 on pci2 bge0: Ethernet address: 00:09:6b:a5:18:05 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX -FDX, auto pcib2: <ACPI Host-PCI bridge> on acpi0 pci5: <ACPI PCI bus> on pcib2 pcib2: slot 3 INTA is routed to irq 9 ips0: <IBM ServeRAID Adapter> mem 0xf4000000-0xf7ffffff irq 9 at device 3.0 on p ci5 ips0: logical drives: 222 ipsd0: <Logical Drive> on ips0 ipsd0: Logical Drive (1824184MB) ipsd1: <Logical Drive> on ips0 ipsd1: Logical Drive (1824184MB) ipsd2: <Logical Drive> on ips0 ipsd2: Logical Drive (1824184MB) ipsd3: <Logical Drive> on ips0 ipsd3: Logical Drive (1824184MB) ipsd4: <Logical Drive> on ips0 ipsd4: Logical Drive (1824184MB) ipsd5: <Logical Drive> on ips0 ipsd5: Logical Drive (1824184MB) ipsd6: <Logical Drive> on ips0 ipsd6: Logical Drive (1824184MB) ipsd7: <Logical Drive> on ips0 ipsd7: Logical Drive (1824184MB) pcib3: <ACPI Host-PCI bridge> on acpi0 pci7: <ACPI PCI bus> on pcib3 pcib4: <ACPI Host-PCI bridge> on acpi0 pci9: <ACPI PCI bus> on pcib4 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: unable to set the command byte. device_probe_and_attach: atkbd0 attach returned 6 psm: failed to restore the keyboard controller command byte. psm0: unable to set the command byte. fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0 x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec Fatal trap 12: page fault while in kernel mode fault virtual address = 0xdeadc0de fault code = supervisor read, page not present instruction pointer = 0x8:0xdeadc0de stack pointer = 0x10:0xd63a5cd0 frame pointer = 0x10:0xd63a5ce0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 29 (irq9: ips0) kernel: type 12 trap, code=0 Stopped at 0xdeadc0de: Fatal trap 12: page fault while in kernel mode fault virtual address = 0xdeadc0de fault code = supervisor read, page not present instruction pointer = 0x8:0xc04928c0 stack pointer = 0x10:0xd63a5ad4 frame pointer = 0x10:0xd63a5ad8 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 current process = 29 (irq9: ips0) kernel: type 12 trap, code=0 db> tr Fatal trap 12: page fault while in kernel mode fault virtual address = 0xdeadc0de fault code = supervisor read, page not present instruction pointer = 0x8:0xc04928c0 stack pointer = 0x10:0xd63a59bc frame pointer = 0x10:0xd63a59c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 current process = 29 (irq9: ips0) kernel: type 12 trap, code=0 db>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200307241920.h6OJKJC0011637>