Date: Fri, 8 Oct 2010 18:43:06 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org Subject: svn commit: r213593 - stable/8/sys/dev/bge Message-ID: <201010081843.o98Ih6Bh003401@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: yongari Date: Fri Oct 8 18:43:06 2010 New Revision: 213593 URL: http://svn.freebsd.org/changeset/base/213593 Log: MFC r212061,212065,212302: r212061: Split common parent DMA tag into ring DMA tag and TX/RX mbuf DMA tag. All controllers that are not BCM5755 or higher have 4GB boundary DMA bug. Previously bge(4) used 32bit DMA address to workaround the bug(r199670). However this caused the use of bounce buffers such that it resulted in poor performance for systems which have more than 4GB memory. Because bus_dma(9) honors boundary restriction requirement of DMA tag for dynamic buffers, having a separate TX/RX mbuf DMA tag will greatly reduce the possibility of using bounce buffers. For DMA buffers allocated with bus_dmamem_alloc(9), now bge(4) explicitly checks whether the requested memory region crossed the boundary or not. With this change, only the DMA buffer that crossed the boundary will use 32bit DMA address. Other DMA buffers are not affected as separate DMA tag is created for each DMA buffer. Even if 32bit DMA address space is used for a buffer, the chance to use bounce buffer is still very low as the size of buffer is small. This change should eliminate most usage of bounce buffers on systems that have more than 4GB memory. More correct fix would be teaching bus_dma(9) to honor boundary restriction for buffers created with bus_dmamem_alloc(9) but it seems that is not easy. While I'm here cleanup bge_dma_map_addr() and remove unnecessary member variables in bge_dmamap_arg structure. Tested by: marcel r212065: Handle PAE case correctly. You cannot effectively specify a 4GB boundary in PAE case so use a 2GB boundary for PAE as suggested by jhb. Pointed out by: jhb Reviewed by: jhb r212302: Make sure to create DMA'able memory for statistics block. This was missed in r212061 and it caused crashes for 570x controllers as controller DMAed statistics to physical address 0. Reported by: kan Modified: stable/8/sys/dev/bge/if_bge.c stable/8/sys/dev/bge/if_bgereg.h Directory Properties: stable/8/sys/ (props changed) stable/8/sys/amd64/include/xen/ (props changed) stable/8/sys/cddl/contrib/opensolaris/ (props changed) stable/8/sys/contrib/dev/acpica/ (props changed) stable/8/sys/contrib/pf/ (props changed) stable/8/sys/dev/xen/xenpci/ (props changed) Modified: stable/8/sys/dev/bge/if_bge.c ============================================================================== --- stable/8/sys/dev/bge/if_bge.c Fri Oct 8 18:31:56 2010 (r213592) +++ stable/8/sys/dev/bge/if_bge.c Fri Oct 8 18:43:06 2010 (r213593) @@ -355,8 +355,10 @@ static int bge_suspend(device_t); static int bge_resume(device_t); static void bge_release_resources(struct bge_softc *); static void bge_dma_map_addr(void *, bus_dma_segment_t *, int, int); -static int bge_dma_alloc(device_t); +static int bge_dma_alloc(struct bge_softc *); static void bge_dma_free(struct bge_softc *); +static int bge_dma_ring_alloc(struct bge_softc *, bus_size_t, bus_size_t, + bus_dma_tag_t *, uint8_t **, bus_dmamap_t *, bus_addr_t *, const char *); static int bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]); static int bge_get_eaddr_mem(struct bge_softc *, uint8_t[]); @@ -614,13 +616,9 @@ bge_dma_map_addr(void *arg, bus_dma_segm if (error) return; - ctx = arg; - - if (nseg > ctx->bge_maxsegs) { - ctx->bge_maxsegs = 0; - return; - } + KASSERT(nseg == 1, ("%s: %d segments returned!", __func__, nseg)); + ctx = arg; ctx->bge_busaddr = segs->ds_addr; } @@ -2122,27 +2120,84 @@ bge_dma_free(struct bge_softc *sc) if (sc->bge_cdata.bge_stats_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_stats_tag); + if (sc->bge_cdata.bge_buffer_tag) + bus_dma_tag_destroy(sc->bge_cdata.bge_buffer_tag); + /* Destroy the parent tag. */ if (sc->bge_cdata.bge_parent_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag); } static int -bge_dma_alloc(device_t dev) +bge_dma_ring_alloc(struct bge_softc *sc, bus_size_t alignment, + bus_size_t maxsize, bus_dma_tag_t *tag, uint8_t **ring, bus_dmamap_t *map, + bus_addr_t *paddr, const char *msg) { struct bge_dmamap_arg ctx; - struct bge_softc *sc; bus_addr_t lowaddr; - bus_size_t sbsz, txsegsz, txmaxsegsz; - int i, error; + bus_size_t ring_end; + int error; - sc = device_get_softc(dev); + lowaddr = BUS_SPACE_MAXADDR; +again: + error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, + alignment, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, + NULL, maxsize, 1, maxsize, 0, NULL, NULL, tag); + if (error != 0) { + device_printf(sc->bge_dev, + "could not create %s dma tag\n", msg); + return (ENOMEM); + } + /* Allocate DMA'able memory for ring. */ + error = bus_dmamem_alloc(*tag, (void **)ring, + BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, map); + if (error != 0) { + device_printf(sc->bge_dev, + "could not allocate DMA'able memory for %s\n", msg); + return (ENOMEM); + } + /* Load the address of the ring. */ + ctx.bge_busaddr = 0; + error = bus_dmamap_load(*tag, *map, *ring, maxsize, bge_dma_map_addr, + &ctx, BUS_DMA_NOWAIT); + if (error != 0) { + device_printf(sc->bge_dev, + "could not load DMA'able memory for %s\n", msg); + return (ENOMEM); + } + *paddr = ctx.bge_busaddr; + ring_end = *paddr + maxsize; + if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0 && + BGE_ADDR_HI(*paddr) != BGE_ADDR_HI(ring_end)) { + /* + * 4GB boundary crossed. Limit maximum allowable DMA + * address space to 32bit and try again. + */ + bus_dmamap_unload(*tag, *map); + bus_dmamem_free(*tag, *ring, *map); + bus_dma_tag_destroy(*tag); + if (bootverbose) + device_printf(sc->bge_dev, "4GB boundary crossed, " + "limit DMA address space to 32bit for %s\n", msg); + *ring = NULL; + *tag = NULL; + *map = NULL; + lowaddr = BUS_SPACE_MAXADDR_32BIT; + goto again; + } + return (0); +} + +static int +bge_dma_alloc(struct bge_softc *sc) +{ + bus_addr_t lowaddr; + bus_size_t boundary, sbsz, txsegsz, txmaxsegsz; + int i, error; lowaddr = BUS_SPACE_MAXADDR; if ((sc->bge_flags & BGE_FLAG_40BIT_BUG) != 0) lowaddr = BGE_DMA_MAXADDR; - if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0) - lowaddr = BUS_SPACE_MAXADDR_32BIT; /* * Allocate the parent bus DMA tag appropriate for PCI. */ @@ -2150,16 +2205,93 @@ bge_dma_alloc(device_t dev) 1, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL, &sc->bge_cdata.bge_parent_tag); - if (error != 0) { device_printf(sc->bge_dev, "could not allocate parent dma tag\n"); return (ENOMEM); } + /* Create tag for standard RX ring. */ + error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STD_RX_RING_SZ, + &sc->bge_cdata.bge_rx_std_ring_tag, + (uint8_t **)&sc->bge_ldata.bge_rx_std_ring, + &sc->bge_cdata.bge_rx_std_ring_map, + &sc->bge_ldata.bge_rx_std_ring_paddr, "RX ring"); + if (error) + return (error); + + /* Create tag for RX return ring. */ + error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_RX_RTN_RING_SZ(sc), + &sc->bge_cdata.bge_rx_return_ring_tag, + (uint8_t **)&sc->bge_ldata.bge_rx_return_ring, + &sc->bge_cdata.bge_rx_return_ring_map, + &sc->bge_ldata.bge_rx_return_ring_paddr, "RX return ring"); + if (error) + return (error); + + /* Create tag for TX ring. */ + error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_TX_RING_SZ, + &sc->bge_cdata.bge_tx_ring_tag, + (uint8_t **)&sc->bge_ldata.bge_tx_ring, + &sc->bge_cdata.bge_tx_ring_map, + &sc->bge_ldata.bge_tx_ring_paddr, "TX ring"); + if (error) + return (error); + /* - * Create tag for Tx mbufs. + * Create tag for status block. + * Because we only use single Tx/Rx/Rx return ring, use + * minimum status block size except BCM5700 AX/BX which + * seems to want to see full status block size regardless + * of configured number of ring. */ + if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && + sc->bge_chipid != BGE_CHIPID_BCM5700_C0) + sbsz = BGE_STATUS_BLK_SZ; + else + sbsz = 32; + error = bge_dma_ring_alloc(sc, PAGE_SIZE, sbsz, + &sc->bge_cdata.bge_status_tag, + (uint8_t **)&sc->bge_ldata.bge_status_block, + &sc->bge_cdata.bge_status_map, + &sc->bge_ldata.bge_status_block_paddr, "status block"); + if (error) + return (error); + + /* Create tag for statistics block. */ + error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STATS_SZ, + &sc->bge_cdata.bge_stats_tag, + (uint8_t **)&sc->bge_ldata.bge_stats, + &sc->bge_cdata.bge_stats_map, + &sc->bge_ldata.bge_stats_paddr, "statistics block"); + if (error) + return (error); + + /* Create tag for jumbo RX ring. */ + if (BGE_IS_JUMBO_CAPABLE(sc)) { + error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_JUMBO_RX_RING_SZ, + &sc->bge_cdata.bge_rx_jumbo_ring_tag, + (uint8_t **)&sc->bge_ldata.bge_rx_jumbo_ring, + &sc->bge_cdata.bge_rx_jumbo_ring_map, + &sc->bge_ldata.bge_rx_jumbo_ring_paddr, "jumbo RX ring"); + if (error) + return (error); + } + + /* Create parent tag for buffers. */ + boundary = 0; + if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0) + boundary = BGE_DMA_BNDRY; + error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), + 1, boundary, lowaddr, BUS_SPACE_MAXADDR, NULL, + NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, + 0, NULL, NULL, &sc->bge_cdata.bge_buffer_tag); + if (error != 0) { + device_printf(sc->bge_dev, + "could not allocate buffer dma tag\n"); + return (ENOMEM); + } + /* Create tag for Tx mbufs. */ if (sc->bge_flags & BGE_FLAG_TSO) { txsegsz = BGE_TSOSEG_SZ; txmaxsegsz = 65535 + sizeof(struct ether_vlan_header); @@ -2167,7 +2299,7 @@ bge_dma_alloc(device_t dev) txsegsz = MCLBYTES; txmaxsegsz = MCLBYTES * BGE_NSEG_NEW; } - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, + error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, txmaxsegsz, BGE_NSEG_NEW, txsegsz, 0, NULL, NULL, &sc->bge_cdata.bge_tx_mtag); @@ -2177,10 +2309,8 @@ bge_dma_alloc(device_t dev) return (ENOMEM); } - /* - * Create tag for Rx mbufs. - */ - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, 0, + /* Create tag for Rx mbufs. */ + error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES, 0, NULL, NULL, &sc->bge_cdata.bge_rx_mtag); @@ -2218,42 +2348,9 @@ bge_dma_alloc(device_t dev) } } - /* Create tag for standard RX ring. */ - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, - PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, - NULL, BGE_STD_RX_RING_SZ, 1, BGE_STD_RX_RING_SZ, 0, - NULL, NULL, &sc->bge_cdata.bge_rx_std_ring_tag); - - if (error) { - device_printf(sc->bge_dev, "could not allocate dma tag\n"); - return (ENOMEM); - } - - /* Allocate DMA'able memory for standard RX ring. */ - error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_std_ring_tag, - (void **)&sc->bge_ldata.bge_rx_std_ring, BUS_DMA_NOWAIT, - &sc->bge_cdata.bge_rx_std_ring_map); - if (error) - return (ENOMEM); - - bzero((char *)sc->bge_ldata.bge_rx_std_ring, BGE_STD_RX_RING_SZ); - - /* Load the address of the standard RX ring. */ - ctx.bge_maxsegs = 1; - ctx.sc = sc; - - error = bus_dmamap_load(sc->bge_cdata.bge_rx_std_ring_tag, - sc->bge_cdata.bge_rx_std_ring_map, sc->bge_ldata.bge_rx_std_ring, - BGE_STD_RX_RING_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); - - if (error) - return (ENOMEM); - - sc->bge_ldata.bge_rx_std_ring_paddr = ctx.bge_busaddr; - - /* Create tags for jumbo mbufs. */ + /* Create tags for jumbo RX buffers. */ if (BGE_IS_JUMBO_CAPABLE(sc)) { - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, + error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MJUM9BYTES, BGE_NSEG_JUMBO, PAGE_SIZE, 0, NULL, NULL, &sc->bge_cdata.bge_mtag_jumbo); @@ -2262,41 +2359,6 @@ bge_dma_alloc(device_t dev) "could not allocate jumbo dma tag\n"); return (ENOMEM); } - - /* Create tag for jumbo RX ring. */ - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, - PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, - NULL, BGE_JUMBO_RX_RING_SZ, 1, BGE_JUMBO_RX_RING_SZ, 0, - NULL, NULL, &sc->bge_cdata.bge_rx_jumbo_ring_tag); - - if (error) { - device_printf(sc->bge_dev, - "could not allocate jumbo ring dma tag\n"); - return (ENOMEM); - } - - /* Allocate DMA'able memory for jumbo RX ring. */ - error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_jumbo_ring_tag, - (void **)&sc->bge_ldata.bge_rx_jumbo_ring, - BUS_DMA_NOWAIT | BUS_DMA_ZERO, - &sc->bge_cdata.bge_rx_jumbo_ring_map); - if (error) - return (ENOMEM); - - /* Load the address of the jumbo RX ring. */ - ctx.bge_maxsegs = 1; - ctx.sc = sc; - - error = bus_dmamap_load(sc->bge_cdata.bge_rx_jumbo_ring_tag, - sc->bge_cdata.bge_rx_jumbo_ring_map, - sc->bge_ldata.bge_rx_jumbo_ring, BGE_JUMBO_RX_RING_SZ, - bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); - - if (error) - return (ENOMEM); - - sc->bge_ldata.bge_rx_jumbo_ring_paddr = ctx.bge_busaddr; - /* Create DMA maps for jumbo RX buffers. */ error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 0, &sc->bge_cdata.bge_rx_jumbo_sparemap); @@ -2314,154 +2376,8 @@ bge_dma_alloc(device_t dev) return (ENOMEM); } } - - } - - /* Create tag for RX return ring. */ - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, - PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, - NULL, BGE_RX_RTN_RING_SZ(sc), 1, BGE_RX_RTN_RING_SZ(sc), 0, - NULL, NULL, &sc->bge_cdata.bge_rx_return_ring_tag); - - if (error) { - device_printf(sc->bge_dev, "could not allocate dma tag\n"); - return (ENOMEM); - } - - /* Allocate DMA'able memory for RX return ring. */ - error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_return_ring_tag, - (void **)&sc->bge_ldata.bge_rx_return_ring, BUS_DMA_NOWAIT, - &sc->bge_cdata.bge_rx_return_ring_map); - if (error) - return (ENOMEM); - - bzero((char *)sc->bge_ldata.bge_rx_return_ring, - BGE_RX_RTN_RING_SZ(sc)); - - /* Load the address of the RX return ring. */ - ctx.bge_maxsegs = 1; - ctx.sc = sc; - - error = bus_dmamap_load(sc->bge_cdata.bge_rx_return_ring_tag, - sc->bge_cdata.bge_rx_return_ring_map, - sc->bge_ldata.bge_rx_return_ring, BGE_RX_RTN_RING_SZ(sc), - bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); - - if (error) - return (ENOMEM); - - sc->bge_ldata.bge_rx_return_ring_paddr = ctx.bge_busaddr; - - /* Create tag for TX ring. */ - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, - PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, - NULL, BGE_TX_RING_SZ, 1, BGE_TX_RING_SZ, 0, NULL, NULL, - &sc->bge_cdata.bge_tx_ring_tag); - - if (error) { - device_printf(sc->bge_dev, "could not allocate dma tag\n"); - return (ENOMEM); - } - - /* Allocate DMA'able memory for TX ring. */ - error = bus_dmamem_alloc(sc->bge_cdata.bge_tx_ring_tag, - (void **)&sc->bge_ldata.bge_tx_ring, BUS_DMA_NOWAIT, - &sc->bge_cdata.bge_tx_ring_map); - if (error) - return (ENOMEM); - - bzero((char *)sc->bge_ldata.bge_tx_ring, BGE_TX_RING_SZ); - - /* Load the address of the TX ring. */ - ctx.bge_maxsegs = 1; - ctx.sc = sc; - - error = bus_dmamap_load(sc->bge_cdata.bge_tx_ring_tag, - sc->bge_cdata.bge_tx_ring_map, sc->bge_ldata.bge_tx_ring, - BGE_TX_RING_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); - - if (error) - return (ENOMEM); - - sc->bge_ldata.bge_tx_ring_paddr = ctx.bge_busaddr; - - /* - * Create tag for status block. - * Because we only use single Tx/Rx/Rx return ring, use - * minimum status block size except BCM5700 AX/BX which - * seems to want to see full status block size regardless - * of configured number of ring. - */ - if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && - sc->bge_chipid != BGE_CHIPID_BCM5700_C0) - sbsz = BGE_STATUS_BLK_SZ; - else - sbsz = 32; - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, - PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, - NULL, sbsz, 1, sbsz, 0, NULL, NULL, &sc->bge_cdata.bge_status_tag); - - if (error) { - device_printf(sc->bge_dev, - "could not allocate status dma tag\n"); - return (ENOMEM); - } - - /* Allocate DMA'able memory for status block. */ - error = bus_dmamem_alloc(sc->bge_cdata.bge_status_tag, - (void **)&sc->bge_ldata.bge_status_block, BUS_DMA_NOWAIT, - &sc->bge_cdata.bge_status_map); - if (error) - return (ENOMEM); - - bzero((char *)sc->bge_ldata.bge_status_block, sbsz); - - /* Load the address of the status block. */ - ctx.sc = sc; - ctx.bge_maxsegs = 1; - - error = bus_dmamap_load(sc->bge_cdata.bge_status_tag, - sc->bge_cdata.bge_status_map, sc->bge_ldata.bge_status_block, - sbsz, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); - - if (error) - return (ENOMEM); - - sc->bge_ldata.bge_status_block_paddr = ctx.bge_busaddr; - - /* Create tag for statistics block. */ - error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, - PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, - NULL, BGE_STATS_SZ, 1, BGE_STATS_SZ, 0, NULL, NULL, - &sc->bge_cdata.bge_stats_tag); - - if (error) { - device_printf(sc->bge_dev, "could not allocate dma tag\n"); - return (ENOMEM); } - /* Allocate DMA'able memory for statistics block. */ - error = bus_dmamem_alloc(sc->bge_cdata.bge_stats_tag, - (void **)&sc->bge_ldata.bge_stats, BUS_DMA_NOWAIT, - &sc->bge_cdata.bge_stats_map); - if (error) - return (ENOMEM); - - bzero((char *)sc->bge_ldata.bge_stats, BGE_STATS_SZ); - - /* Load the address of the statstics block. */ - ctx.sc = sc; - ctx.bge_maxsegs = 1; - - error = bus_dmamap_load(sc->bge_cdata.bge_stats_tag, - sc->bge_cdata.bge_stats_map, sc->bge_ldata.bge_stats, - BGE_STATS_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); - - if (error) - return (ENOMEM); - - sc->bge_ldata.bge_stats_paddr = ctx.bge_busaddr; - return (0); } @@ -2788,7 +2704,7 @@ bge_attach(device_t dev) else sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; - if (bge_dma_alloc(dev)) { + if (bge_dma_alloc(sc)) { device_printf(sc->bge_dev, "failed to allocate DMA resources\n"); error = ENXIO; Modified: stable/8/sys/dev/bge/if_bgereg.h ============================================================================== --- stable/8/sys/dev/bge/if_bgereg.h Fri Oct 8 18:31:56 2010 (r213592) +++ stable/8/sys/dev/bge/if_bgereg.h Fri Oct 8 18:43:06 2010 (r213593) @@ -2487,6 +2487,16 @@ struct bge_gib { #define BGE_DMA_MAXADDR 0xFFFFFFFFFF #endif +#ifdef PAE +#define BGE_DMA_BNDRY 0x80000000 +#else +#if (BUS_SPACE_MAXADDR > 0xFFFFFFFF) +#define BGE_DMA_BNDRY 0x100000000 +#else +#define BGE_DMA_BNDRY 0 +#endif +#endif + /* * Ring structures. Most of these reside in host memory and we tell * the NIC where they are via the ring control blocks. The exceptions @@ -2530,6 +2540,7 @@ struct bge_ring_data { */ struct bge_chain_data { bus_dma_tag_t bge_parent_tag; + bus_dma_tag_t bge_buffer_tag; bus_dma_tag_t bge_rx_std_ring_tag; bus_dma_tag_t bge_rx_jumbo_ring_tag; bus_dma_tag_t bge_rx_return_ring_tag; @@ -2558,12 +2569,7 @@ struct bge_chain_data { }; struct bge_dmamap_arg { - struct bge_softc *sc; bus_addr_t bge_busaddr; - uint16_t bge_flags; - int bge_idx; - int bge_maxsegs; - struct bge_tx_bd *bge_ring; }; #define BGE_HWREV_TIGON 0x01
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201010081843.o98Ih6Bh003401>