Date: Mon, 26 Mar 2018 01:11:28 +0200 From: Bernd Walter <ticso@cicely7.cicely.de> To: Hans Petter Selasky <hps@selasky.org> Cc: Bernd Walter <ticso@cicely7.cicely.de>, freebsd-arm@freebsd.org, freebsd-current@freebsd.org, ticso@cicely.de Subject: Re: webcamd based touchscreen problem on Pi3 Message-ID: <20180325231128.GA16646@cicely7.cicely.de> In-Reply-To: <20180312111246.GA14138@cicely7.cicely.de> References: <20180308200849.GC86413@cicely7.cicely.de> <20180308210805.GE86413@cicely7.cicely.de> <ef53e666-237f-bb96-efaa-d8b9e020488e@selasky.org> <20180309004433.GI86413@cicely7.cicely.de> <4765ef04-6fb1-f9dc-315d-c4419d6ba016@selasky.org> <20180309114025.GJ86413@cicely7.cicely.de> <e7edfe70-d289-da01-c253-01c27febca3b@selasky.org> <20180309132539.GL86413@cicely7.cicely.de> <20180310000336.GM86413@cicely7.cicely.de> <20180312111246.GA14138@cicely7.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 12, 2018 at 12:12:47PM +0100, Bernd Walter wrote: > On Sat, Mar 10, 2018 at 01:03:39AM +0100, Bernd Walter wrote: > > On Fri, Mar 09, 2018 at 02:25:39PM +0100, Bernd Walter wrote: > > So the older 7" HDMI C Rev 1.1 with the non IPS panel won't even attach, but > > it always needed some special binary support for Linux, no surprises here. > > The newer Rev 2.1 with the IPS panel claims to be the same and work with > > webcamd, at least I get data via /dev/input/event0, which looks reasonable > > with evdev-dump. > > That's an interesting starting point. > > I've got a new model of the 10" HDMI B. > It behaves differently. > First of all - uep seems to take it, which it didn't for any of > the previous displays I'd tested. > I had to remove the driver from the loader.conf to have webcamd attach to it. > webcamd attaches fine and it delivers touch events: > [29]sa# evdev-dump /dev/input/event0 > /dev/input/event0 3041705595.425438 EV_ABS ABS_MT_TRACKING_ID 0x00000000 > /dev/input/event0 3041705595.425438 EV_ABS ABS_MT_POSITION_X 0x000001CF > /dev/input/event0 3041705595.425438 EV_ABS ABS_MT_POSITION_Y 0x0000025E > /dev/input/event0 3041705595.425438 EV_ABS ABS_MT_PRESSURE 0x00000005 > /dev/input/event0 3041705595.425438 EV_KEY BTN_TOUCH 0x00000001 > /dev/input/event0 3041705595.425438 EV_ABS ABS_X 0x000001CF > /dev/input/event0 3041705595.425438 EV_ABS ABS_Y 0x0000025E > /dev/input/event0 3041705595.425438 EV_ABS ABS_PRESSURE 0x00000005 > /dev/input/event0 3041705595.425438 EV_SYN SYN_REPORT 0x00000000 > > Whatever had been the cause for my previous problem, they obviously > have fixed them in firmware. Unfortunately I still have some problems. [63]sa# evdev-dump /dev/input/event1 /dev/input/event1 3043946310.664423 EV_ABS ABS_MT_TRACKING_ID 0x0000003F /dev/input/event1 3043946310.664423 EV_ABS ABS_MT_POSITION_X 0x000001C9 /dev/input/event1 3043946310.664423 EV_ABS ABS_MT_POSITION_Y 0x00000112 /dev/input/event1 3043946310.664423 EV_KEY BTN_TOUCH 0x00000001 /dev/input/event1 3043946310.664423 EV_ABS ABS_X 0x000001C9 /dev/input/event1 3043946310.664423 EV_ABS ABS_Y 0x00000112 /dev/input/event1 3043946310.664423 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946310.784395 EV_ABS ABS_MT_TRACKING_ID 0xFFFFFFFF /dev/input/event1 3043946310.784395 EV_KEY BTN_TOUCH 0x00000000 /dev/input/event1 3043946310.784395 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946316.944324 EV_ABS ABS_MT_TRACKING_ID 0x00000040 /dev/input/event1 3043946316.944324 EV_ABS ABS_MT_POSITION_X 0x000001CE /dev/input/event1 3043946316.944324 EV_ABS ABS_MT_POSITION_Y 0x000000FE /dev/input/event1 3043946316.944324 EV_KEY BTN_TOUCH 0x00000001 /dev/input/event1 3043946316.944324 EV_ABS ABS_X 0x000001CE /dev/input/event1 3043946316.944324 EV_ABS ABS_Y 0x000000FE /dev/input/event1 3043946316.944324 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946317.004303 EV_ABS ABS_MT_TRACKING_ID 0xFFFFFFFF /dev/input/event1 3043946317.004303 EV_KEY BTN_TOUCH 0x00000000 /dev/input/event1 3043946317.004303 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946319.744283 EV_ABS ABS_MT_TRACKING_ID 0x00000041 /dev/input/event1 3043946319.744283 EV_ABS ABS_MT_POSITION_X 0x0000020E /dev/input/event1 3043946319.744283 EV_ABS ABS_MT_POSITION_Y 0x000000D8 /dev/input/event1 3043946319.744283 EV_KEY BTN_TOUCH 0x00000001 /dev/input/event1 3043946319.744283 EV_ABS ABS_X 0x0000020E /dev/input/event1 3043946319.744283 EV_ABS ABS_Y 0x000000D8 /dev/input/event1 3043946319.744283 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946319.864240 EV_ABS ABS_MT_TRACKING_ID 0xFFFFFFFF /dev/input/event1 3043946319.864240 EV_KEY BTN_TOUCH 0x00000000 /dev/input/event1 3043946319.864240 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946322.004229 EV_ABS ABS_MT_TRACKING_ID 0x00000042 /dev/input/event1 3043946322.004229 EV_ABS ABS_MT_POSITION_X 0x00000209 /dev/input/event1 3043946322.004229 EV_ABS ABS_MT_POSITION_Y 0x000000CD /dev/input/event1 3043946322.004229 EV_KEY BTN_TOUCH 0x00000001 /dev/input/event1 3043946322.004229 EV_ABS ABS_X 0x00000209 /dev/input/event1 3043946322.004229 EV_ABS ABS_Y 0x000000CD /dev/input/event1 3043946322.004229 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946325.454187 EV_ABS ABS_MT_POSITION_X 0x0000016A /dev/input/event1 3043946325.454187 EV_ABS ABS_MT_POSITION_Y 0x000000D2 /dev/input/event1 3043946325.454187 EV_ABS ABS_X 0x0000016A /dev/input/event1 3043946325.454187 EV_ABS ABS_Y 0x000000D2 /dev/input/event1 3043946325.454187 EV_SYN SYN_REPORT 0x00000000 /dev/input/event1 3043946325.574174 EV_ABS ABS_MT_POSITION_X 0x0000016B /dev/input/event1 3043946325.574174 EV_ABS ABS_X 0x0000016B /dev/input/event1 3043946325.574174 EV_SYN SYN_REPORT 0x00000000 All 5 blocks are a single touch, which means finger on screen for a short moment. On the first 3 I get position data and BTN_TOUCH 1 as well as BTN_TOUCH 0. But this is not consistent, sometime I get only a 1 and sometime only a 0. In the 5th block I even got neither. The timestamps on the first 3 cases mark it clearly when I removed the finger. I got a 1 on touch-start and a 0 on touch-end. On the 4th case I got a touch-start, but no touch-end. In the 5th case I only got positon updates. This is a 7" display - the 10" also delivers ABS_PRESSURE, but the problem is the same that I don't consistently get the EV_KEY events. -- B.Walter <bernd@bwct.de> http://www.bwct.de Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180325231128.GA16646>