Date: Thu, 19 Feb 2004 01:58:03 +0100 From: Harald Schmalzbauer <h@schmalzbauer.de> To: Muthu_T@Dell.com Cc: freebsd-current@freebsd.org Subject: Re: USB CDROM not recognizing (while hotplugging) in 5.2 Release Message-ID: <40340A1B.2080609@schmalzbauer.de> In-Reply-To: <136A7C767A0679488C4642731C2186E018A429@blrx2kmbgl301.blr.amer.dell.com> References: <136A7C767A0679488C4642731C2186E018A429@blrx2kmbgl301.blr.amer.dell.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enigEA43DAE06056847B05474B93 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Muthu_T@Dell.com schrieb: > All, > > While 5.2-RELEASE running, I connected the USB CDROM (TEAC CD-210PU). > I was expected some messages in the /var/log/messages file. But nothing > displayed. > > When I restart the m/c, I get the following dmesg output: (see the > umass0) Hello, perhaps I'm not the who should answer, but I had the same symptoms with a nforce2 chipset. Have you tried disabling acpi? That helped for me. Best regards, -Harry > > [dmesg output] > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004 > root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2389.25-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE > ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 536805376 (511 MB) > avail memory = 511766528 (488 MB) > ACPI APIC Table: <DELL PE1750 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 8 > ioapic1: Changing APIC ID to 9 > ioapic2: Changing APIC ID to 10 > ioapic0 <Version 1.1> irqs 0-15 on motherboard > ioapic1 <Version 1.1> irqs 16-31 on motherboard > ioapic2 <Version 1.1> irqs 32-47 on motherboard > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL PE1750 > on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > pcibios: BIOS version 2.10 > Using $PIR table, 7 entries at 0xc00fc4c0 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: slot 15 INTA is routed to irq 11 > pci0: <display, VGA> at device 14.0 (no driver attached) > atapci0: <ServerWorks CSB5 UDMA100 controller> port > 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device > 15.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: simplex device, DMA on primary only > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 11 > at device 15.2 on pci0 > usb0: OHCI version 1.0, legacy support > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > umass0: TEAC USB CD-ROM 210PU, rev 1.10/1.36, addr 2 > isab0: <PCI-ISA bridge> at device 15.3 on pci0 > isa0: <ISA bus> on isab0 > pcib1: <ACPI Host-PCI bridge> on acpi0 > pci4: <ACPI PCI bus> on pcib1 > amr0: <LSILogic MegaRAID> mem > 0xfc900000-0xfc93ffff,0xf0000000-0xf7ffffff irq 18 at device 3.0 on pci4 > amr0: <LSILogic PERC 4/Di> Firmware 4.10, BIOS B111, 128MB RAM > pcib2: <ACPI Host-PCI bridge> on acpi0 > pci3: <ACPI PCI bus> on pcib2 > fxp0: <Intel 82550 Pro/100 Ethernet> port 0xbcc0-0xbcff mem > 0xfcb00000-0xfcb1ffff,0xfcb20000-0xfcb20fff irq 24 at device 6.0 on pci3 > fxp0: Ethernet address 00:02:b3:e7:8f:70 > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pcib3: <ACPI Host-PCI bridge> on acpi0 > pci2: <ACPI PCI bus> on pcib3 > bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem > 0xfcd20000-0xfcd2ffff,0xfcd30000-0xfcd3ffff irq 16 at device 0.0 on pci2 > bge0: Ethernet address: 00:0b:db:93:e3:f4 > miibus1: <MII bus> on bge0 > brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus1 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX-FDX, auto > bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem > 0xfcd00000-0xfcd0ffff,0xfcd10000-0xfcd1ffff irq 17 at device 0.1 on pci2 > bge1: Ethernet address: 00:0b:db:93:e3:f5 > miibus2: <MII bus> on bge1 > brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus2 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX-FDX, auto > pcib4: <ACPI Host-PCI bridge> on acpi0 > pci1: <ACPI PCI bus> on pcib4 > ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xdc00-0xdcff mem > 0xfcf01000-0xfcf01fff irq 20 at device 4.0 on pci1 > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd800-0xd8ff mem > 0xfcf00000-0xfcf00fff irq 21 at device 4.1 on pci1 > aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > acpi_cpu2: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu2 attach returned 6 > orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounters tick every 10.000 msec > acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4 > Waiting 15 seconds for SCSI devices to settle > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 69116MB (141549568 sectors) RAID 5 (optimal) > GEOM: create disk amrd0 dp=0xc474958c > umass0: BBB reset failed, TIMEOUT > umass0: BBB bulk-in clear stall failed, TIMEOUT > umass0: BBB bulk-out clear stall failed, TIMEOUT > umass0: BBB reset failed, TIMEOUT > umass0: BBB bulk-in clear stall failed, TIMEOUT > umass0: BBB bulk-out clear stall failed, TIMEOUT > umass0: BBB reset failed, TIMEOUT > umass0: BBB bulk-in clear stall failed, TIMEOUT > umass0: BBB bulk-out clear stall failed, TIMEOUT > umass0: BBB reset failed, TIMEOUT > umass0: BBB bulk-in clear stall failed, TIMEOUT > umass0: BBB bulk-out clear stall failed, TIMEOUT > umass0: BBB reset failed, TIMEOUT > umass0: BBB bulk-in clear stall failed, TIMEOUT > umass0: BBB bulk-out clear stall failed, TIMEOUT > ses0 at amr0 bus 0 target 6 lun 0 > ses0: <PE/PV 1x3 SCSI BP 1.1> Fixed Processor SCSI-2 device > ses0: SAF-TE Compliant Device > SMP: AP CPU #1 Launched! > Mounting root from ufs:/dev/amrd0s1a > > [/dmesg output] > > > > > But in Linux AS 3.0 running, When I connect the USB CDROM I am getting > the following messages. > > [RedHat Linux AS3.0 - '/var/log/messages' output] > > Feb 17 17:38:28 rh301655 kernel: hub.c: new USB device 00:0f.2-1, > assigned address 2 > Feb 17 17:38:28 rh301655 kernel: usb.c: USB device 2 (vend/prod > 0x644/0x1000) is not claimed by any active driver. > Feb 17 17:38:31 rh301655 /etc/hotplug/usb.agent: Setup usb-storage for > USB product 644/1000/136 > Feb 17 17:38:31 rh301655 kernel: Initializing USB Mass Storage driver... > Feb 17 17:38:31 rh301655 kernel: usb.c: registered new driver > usb-storage > Feb 17 17:38:31 rh301655 kernel: scsi1 : SCSI emulation for USB Mass > Storage devices > Feb 17 17:38:31 rh301655 kernel: Starting timer : 0 0 > Feb 17 17:38:31 rh301655 kernel: Vendor: TEAC Model: CD-210PU > Rev: 10A6 > Feb 17 17:38:31 rh301655 kernel: Type: CD-ROM > ANSI SCSI revision: 02 > Feb 17 17:38:31 rh301655 kernel: Starting timer : 0 0 > Feb 17 17:38:31 rh301655 kernel: USB Mass Storage support registered. > Feb 17 17:38:31 rh301655 kernel: inserting floppy driver for > 2.4.21-4.ELsmp > Feb 17 17:38:34 rh301655 kernel: floppy0: no floppy controllers found > Feb 17 17:38:34 rh301655 insmod: > /lib/modules/2.4.21-4.ELsmp/kernel/drivers/block/floppy.o: init_module: > No such device > Feb 17 17:38:34 rh301655 insmod: Hint: insmod errors can be caused by > incorrect module parameters, including invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > Feb 17 17:38:34 rh301655 insmod: > /lib/modules/2.4.21-4.ELsmp/kernel/drivers/block/floppy.o: insmod > block-major-2 failed > Feb 17 17:38:34 rh301655 kernel: Attached scsi CD-ROM sr0 at scsi1, > channel 0, id 0, lun 0 > Feb 17 17:38:34 rh301655 kernel: sr0: scsi3-mmc drive: 10x/10x cd/rw > xa/form2 cdda pop-up > Feb 17 17:38:34 rh301655 kernel: Uniform CD-ROM driver Revision: 3.12 > Feb 17 17:38:37 rh301655 devlabel: devlabel service started/restarted > > Feb 17 17:39:21 rh301655 kernel: usb.c: USB disconnect on device > 00:0f.2-1 address 2 > Feb 17 17:39:21 rh301655 kernel: inserting floppy driver for > 2.4.21-4.ELsmp > Feb 17 17:39:24 rh301655 kernel: floppy0: no floppy controllers found > Feb 17 17:39:24 rh301655 insmod: > /lib/modules/2.4.21-4.ELsmp/kernel/drivers/block/floppy.o: init_module: > No such device > Feb 17 17:39:24 rh301655 insmod: Hint: insmod errors can be caused by > incorrect module parameters, including invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > Feb 17 17:39:24 rh301655 insmod: > /lib/modules/2.4.21-4.ELsmp/kernel/drivers/block/floppy.o: insmod > block-major-2 failed > Feb 17 17:39:25 rh301655 devlabel: devlabel service started/restarted > > [snip] > > Any ideas? > > Thanks. > > --T. Muthu Mohan > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > --------------enigEA43DAE06056847B05474B93 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFANAogBylq0S4AzzwRAskjAJ0QnbGiUlcU9nZRkgr+f+3NA/KsVwCeMT7Z lNe36+aI/oaT46bNQY+/y6I= =+6Ug -----END PGP SIGNATURE----- --------------enigEA43DAE06056847B05474B93--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40340A1B.2080609>