Date: Thu, 13 Jan 2000 22:48:19 GMT From: Anthony Wyatt <Anthony.Wyatt@its.csiro.au> To: freebsd-mobile@freebsd.org Subject: Xircom Blues Message-ID: <20000113.22481900@cabramurra-mi.cbr.its.csiro.au>
next in thread | raw e-mail | index | archive | help
--------------=_4D480090AE480850D508
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Hi,
I've just installed 3.4 and I can't get my Xircom 10/100 + 56 Modem=20
to work.
I have rebuilt the kernel with card, pcic and xe0 options, but when I=20
boot I get:
pccard[56]: driver allocation failed for Xircom
pccard[56]: pccard started
My pccard.conf file is:
io 0x240-0x360
irq 3 5 10 11 13 15
memory 0xd4000 96k
card "Xircom" "CreditCard Etherner 10/100 + "
config 0x17 "XXX" ?
insert echo inserted
insert /etc/pccard_ether xe0
remove echo remove
remove /etc/pccard_ether xe0 delete
The "XXX" was sio3, but that didn't work so I tried xe0, and that=20
didn't work either :-( I've attached my dmesg at the bottom. Does=20
anyone have any ideas? (I just rebooted with the irq 5 removed but I=20
got the same error)
Thanks,
Anthony
--------------=_4D480090AE480850D508
Content-Description: filename="dmesg.txt"
Content-Disposition: inline; filename="dmesg.txt"
Content-Type: text/plain; charset=iso-8859-1; name ="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-STABLE #6: Fri Jan 14 09:39:23 EST 2000
wya015@cabramurra-mi.cbr.its.csiro.au:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (267.27-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x650 Stepping =3D 0
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M=
CA,CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 134217728 (131072K bytes)
config> di zp0
No such device: zp0
Invalid command or syntax. Type `?' for help.
config> di ze0
No such device: ze0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ex0
No such device: ex0
Invalid command or syntax. Type `?' for help.
config> di ep0
No such device: ep0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di wt0
No such device: wt0
Invalid command or syntax. Type `?' for help.
config> di scd0
No such device: scd0
Invalid command or syntax. Type `?' for help.
config> di mcd0
No such device: mcd0
Invalid command or syntax. Type `?' for help.
config> di matcdc0
No such device: matcdc0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory =3D 127844352 (124848K bytes)
Preloaded elf kernel "kernel" at 0xc0299000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc029909c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge (AGP disabled)> rev 0x02 on pci=
0.0.0
vga0: <NeoMagic NM2160 laptop SVGA controller> rev 0x00 int a irq 11 on =
pci0.2.0
pcic0: <TI PCI-1131 PCI-CardBus Bridge> rev 0x01 int a irq 11 on pci0.3.=
0
pcic1: <TI PCI-1131 PCI-CardBus Bridge> rev 0x01 int b irq 11 on pci0.3.=
1
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=3D0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTCA-24090>
wd0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
xe0: probe
xe0 not found
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
pcic: controller irq 5
Initializing PC-card drivers: xe sio
changing root device to wd0s2a
Card inserted, slot 1
--------------=_4D480090AE480850D508--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000113.22481900>