Date: Tue, 14 Oct 2025 13:54:00 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: arrowd@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #26988 - Still Failing Message-ID: <799639133.1289.1760450041055@jenkins.ci.freebsd.org> In-Reply-To: <1492733651.1287.1760437390802@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #26988 (af30e8d90b772c0997da013b17e67a64841282ac) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26988/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26988/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26988/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) af30e8d90b772c0997da013b17e67a64841282ac by arrowd: fuse_flush: Reuse the struct mount *mp variable The end of the build log: [...truncated 4.24 MiB...] epair1b: link state changed to DOWN passed [0.306s] sys/netinet/multicast:IP_ADD_MEMBERSHIP_ip_mreq -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:84:22 epair1b: Ethernet address: 58:9c:fc:10:a7:c0 epair1a: link state changed to UP epair1b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.262s] sys/netinet/multicast:IP_ADD_MEMBERSHIP_ip_mreqn -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:84:22 epair1b: Ethernet address: 58:9c:fc:10:a7:c0 epair1a: link state changed to UP epair1b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.281s] sys/netinet/multicast:MCAST_JOIN_GROUP -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:84:22 epair1b: Ethernet address: 58:9c:fc:10:a7:c0 epair1a: link state changed to UP epair1b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.274s] sys/netinet/output:output_raw_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:84:22 epair1b: Ethernet address: 58:9c:fc:10:a7:c0 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.677s] sys/netinet/output:output_raw_success -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.192s] sys/netinet/output:output_tcp_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:84:22 epair1b: Ethernet address: 58:9c:fc:10:a7:c0 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [2.522s] sys/netinet/output:output_tcp_setup_success -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.289s] sys/netinet/output:output_udp_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:84:22 epair1b: Ethernet address: 58:9c:fc:10:a7:c0 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [8.422s] sys/netinet/output:output_udp_setup_success -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [1.282s] sys/netinet/redirect:valid_redirect -> epair0a: Ethernet address: 58:9c:fc:10:96:c6 epair0b: Ethernet address: 58:9c:fc:10:12:3c epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.113s] sys/netinet/so_reuseport_lb_test:basic_ipv4 -> passed [0.780s] sys/netinet/so_reuseport_lb_test:basic_ipv6 -> Limiting tcp reset response from 18608 to 191 packets/sec Limiting tcp reset response from 12988 to 203 packets/sec passed [1.263s] sys/netinet/so_reuseport_lb_test:bind_without_listen -> passed [0.009s] sys/netinet/so_reuseport_lb_test:concurrent_add -> passed [2.601s] sys/netinet/so_reuseport_lb_test:connect_bound -> passed [0.007s] sys/netinet/so_reuseport_lb_test:connect_not_bound -> passed [0.006s] sys/netinet/so_reuseport_lb_test:double_listen_ipv4 -> passed [0.006s] sys/netinet/so_reuseport_lb_test:double_listen_ipv6 -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet_bind_connected_port -> passed [0.008s] sys/netinet/socket_afinet:socket_afinet_bind_ok -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet_bind_zero -> skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781) [0.005s] sys/netinet/socket_afinet:socket_afinet_bindany -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet_multibind -> passed [0.125s] sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup -> passed [0.006s] sys/netinet/socket_afinet:socket_afinet_poll_rdhup -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet_stream_reconnect -> passed [0.005s] sys/netinet/tcp_connect_port_test:basic_ipv4 -> Limiting tcp reset response from 646 to 201 packets/sec Limiting tcp reset response from 14792 to 211 packets/sec Limiting tcp reset response from 20580 to 202 packets/sec Limiting tcp reset response from 20104 to 191 packets/sec passed [3.373s] sys/netinet/tcp_connect_port_test:basic_ipv6 -> Limiting tcp reset response from 19203 to 208 packets/sec Limiting tcp reset response from 18416 to 210 packets/sec Limiting tcp reset response from 17765 to 190 packets/sec passed [3.581s] TCP HPTS started 2 ((unbounded)) swi interrupt threads sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_concurrent_operations -> passed [0.340s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_cpu_assignment -> passed [0.353s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_deferred_requests -> failed: /usr/tests/atf_python/sys/netlink/netlink.py:376: ValueError [0.506s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_direct_wake_mechanism -> Sleeping on "-" with the following non-sleepable locks held: exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff8014cb15000) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467 stack backtrace: #0 0xffffffff80c061dc at witness_debugger+0x6c #1 0xffffffff80c073f0 at witness_warn+0x430 #2 0xffffffff80b9a928 at _sleep+0x58 #3 0xffffffff80bf8e91 at taskqueue_thread_loop+0xc1 #4 0xffffffff80b3e472 at fork_exit+0x82 #5 0xffffffff810b457e at fork_trampoline+0xe Sleeping on "-" with the following non-sleepable locks held: exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff8014cb15000) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467 stack backtrace: #0 0xffffffff80c061dc at witness_debugger+0x6c #1 0xffffffff80c073f0 at witness_warn+0x430 #2 0xffffffff80b9a928 at _sleep+0x58 #3 0xffffffff80bf8e91 at taskqueue_thread_loop+0xc1 #4 0xffffffff80b3e472 at fork_exit+0x82 #5 0xffffffff810b457e at fork_trampoline+0xe Thread 0xfffff8021b4bd000 exiting with the following locks held: exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff8014cb15000) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467 panic: Thread 0xfffff8021b4bd000 cannot exit while holding sleeplocks cpuid = 0 time = 1760450039 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00a3c0ec70 vpanic() at vpanic+0x136/frame 0xfffffe00a3c0eda0 panic() at panic+0x43/frame 0xfffffe00a3c0ee00 witness_thread_exit() at witness_thread_exit+0x1ea/frame 0xfffffe00a3c0ee60 thread_exit() at thread_exit+0x26d/frame 0xfffffe00a3c0ee90 kthread_exit() at kthread_exit+0xb1/frame 0xfffffe00a3c0eec0 taskqueue_thread_loop() at taskqueue_thread_loop+0x1e9/frame 0xfffffe00a3c0eef0 fork_exit() at fork_exit+0x82/frame 0xfffffe00a3c0ef30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00a3c0ef30 --- trap 0x530e8c94, rip = 0x4b0c8c9438322f30, rsp = 0x4920776f79676e61, rbp = 0x746c6165486f676e --- KDB: enter: panic [ thread pid 0 tid 122587 ] Stopped at kdb_enter+0x33: movq $0,0x121d0a2(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 0 dynamic pcpu = 0xa075c0 curthread = 0xfffff8021b4bd000: pid 0 tid 122587 critnest 1 "netlink_socket (PID" curpcb = 0xfffff8021b4bd550 fpcurthread = none idlethread = 0xfffff8000460b780: tid 100003 "idle: cpu0" self = 0xffffffff82610000 curpmap = 0xffffffff81d9f520 tssp = 0xffffffff82610384 rsp0 = 0xfffffe00a3c0f000 kcr3 = 0x800000000259b003 ucr3 = 0xffffffffffffffff scr3 = 0x922729f7 gs32p = 0xffffffff82610404 ldt = 0xffffffff82610444 tss = 0xffffffff82610434 curvnet = 0 spin locks held: db:0:kdb.enter.panic> reset Uptime: 49m28s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26988' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./run.sh x ./disable-notyet-tests.sh x ./run-kyua.sh x ./disable-zfs-tests.sh x ./auto-shutdown x ./disable-dtrace-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins18440563714732335693.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'af30e8d90b772c0997da013b17e67a64841282ac', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../af30e8d90b772c0997da013b17e67a64841282ac/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?799639133.1289.1760450041055>