Date: Thu, 13 Dec 2012 21:23:09 -0500 From: Mike Tancsa <mike@sentex.net> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: USB3 SATA enclosure Message-ID: <50CA8D8D.9060501@sentex.net> In-Reply-To: <201212130824.57040.hselasky@c2i.net> References: <50C65439.8010408@sentex.net> <201212121353.27372.hselasky@c2i.net> <50C8EEF3.1080900@sentex.net> <201212130824.57040.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/13/2012 2:24 AM, Hans Petter Selasky wrote: > Hi, > > There is an error message there: > > xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb900000-0xfb901fff irq 18 at > device 0.0 on pci4 > usbus1: waiting for BIOS to give up control > usbus1: timed out waiting for BIOS > > 1) Can you turn off USB legacy support in the BIOS? > 2) Can you boot with bootverbose set using 9-stable and BIOS legacy support > enabled? Hi, That did the trick! Actually, legacy was disabled in the BIOS. Enabling it now shows it at full speed! ugen1.2: <USB 3.0 SATA Bridge VIA Labs, Inc.> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON 0(cage)# dd if=/dev/da1 of=/dev/null bs=1024k count=900 900+0 records in 900+0 records out 943718400 bytes transferred in 6.438713 secs (146569414 bytes/sec) 0(cage)# I still get the error xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb900000-0xfb901fff irq 18 at device 0.0 on pci4 usbus1: waiting for BIOS to give up control usbus1: timed out waiting for BIOS xhci0: 32 byte context size. usbus1 on xhci0 ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50CA8D8D.9060501>