Date: Sat, 26 Sep 2009 22:08:39 GMT From: "Šimun Mikecin" <numisemis@yahoo.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/139162: [panic] 8.0-RC1 panics if using IP over firewire (fwip) Message-ID: <200909262208.n8QM8dkE089633@www.freebsd.org> Resent-Message-ID: <200909262210.n8QMA1hf096827@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 139162
>Category: kern
>Synopsis: [panic] 8.0-RC1 panics if using IP over firewire (fwip)
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Sep 26 22:10:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Šimun Mikecin
>Release: 8.0-RC1 amd64
>Organization:
>Environment:
FreeBSD data.home.hr 8.0-RC1 FreeBSD 8.0-RC1 #0 r: Sat Sep 26 23:42:33 CEST 2009 root@data.home.hr:/usr/obj/usr/src/sys/DATA amd64
>Description:
I have configured an IP over firewire interface (fwip0) by using fwip(4) driver.
As soon as any communication begins over the wire, kernel panics. Here is copy of a textdump:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC1 #0 r: Sat Sep 26 23:42:33 CEST 2009
root@data.home.hr:/usr/obj/usr/src/sys/DATA
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz (3333.35-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8251506688 (7869 MB)
ACPI APIC Table: <IntelR AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bfde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1
pcib2: <PCI-PCI bridge> at device 6.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib3
amr0: <LSILogic MegaRAID 1.53> mem 0xfdcf0000-0xfdcfffff,0xfd880000-0xfd8bffff at device 14.0 on pci3
amr0: Using 64-bit DMA
amr0: [ITHREAD]
amr0: delete logical drives supported by controller
amr0: <LSILogic PERC 4e/DC> Firmware 521X, BIOS H430, 128MB RAM
pcib4: <PCI-PCI bridge> at device 0.2 on pci2
pci4: <PCI bus> on pcib4
uhci0: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f10
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f10
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xfd00-0xfd1f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f10
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci0: <JMicron JMB363 SATA300 controller> port 0xaf00-0xaf07,0xae00-0xae03,0xad00-0xad07,0xac00-0xac03,0xab00-0xab0f mem 0xfdefe000-0xfdefffff irq 16 at device 0.0 on pci6
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.00 controller with 2 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x003b
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x0010
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x0010
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
fwohci0: <VIA Fire II (VT6306)> port 0xbf00-0xbf7f mem 0xfdaff000-0xfdaff7ff irq 20 at device 3.0 on pci7
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:29:20:00:06:e9:8e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:01:29:20:00:06:e9:8e @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI controller> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf51f mem 0xfdffd000-0xfdffd7ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160a2206000a22
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160a2206000a22
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-120S/1.01> at ata4-master UDMA66
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd1: DVDR <PIONEER DVD-RW DVR-110/1.22> at ata4-slave UDMA66
Waiting 5 seconds for SCSI devices to settle
amr0: delete logical drives supported by controller
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34940MB (71557120 sectors) RAID 0 (optimal)
amrd1: <LSILogic MegaRAID logical drive> on amr0
amrd1: 34940MB (71557120 sectors) RAID 0 (optimal)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): Unretryable error
(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1:ata0:0:1:0): CAM Status: SCSI Status Error
(probe1:ata0:0:1:0): SCSI Status: Check Condition
(probe1:ata0:0:1:0): NOT READY asc:3a,0
(probe1:ata0:0:1:0): Medium not present
(probe1:ata0:0:1:0): Unretryable error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01
(aprobe1:ahcich1:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
ada0 at ahcich1 bus 0 target 0 lun 0
ada0: <ST3750640AS 3.AAC> ATA/ATAPI-7 SATA 2.x device
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-120S 1.01> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada0: 300.000MB/s transfers
ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
cd1 at ata0 bus 0 target 1 lun 0
cd1: <PIONEER DVD-RW DVR-110 1.22> Removable CD-ROM SCSI-0 device
cd1: 66.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/ufs/root
ZFS filesystem version 13
ZFS storage pool version 13
<118>Entropy harvesting:
<118> interrupts
<118> ethernet
<118> point_to_point
<118> kickstart
<118>.
<118>/dev/ufs/root: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ufs/root: clean, 104067 free (787 frags, 12910 blocks, 0.3% fragmentation)
<118>Starting Network: lo0 fwip0.
<118>No ALTQ support in kernel
<118>ALTQ related functions disabled
<118>Sep 26 23:48:39 pflogd[327]: [priv]: msg PRIV_OPEN_LOG received
<118>No ALTQ support in kernel
<118>ALTQ related functions disabled
<118>No ALTQ support in kernel
<118>ALTQ related functions disabled
<118>pf enabled
<118>add net default: gateway 10.3.0.2
<118>Additional routing options:
<118> IP gateway=YES
<118>.
<118>Sep 26 23:48:39 data rpcbind: cannot create socket for udp6
<118>Starting mountd.
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
<118>Starting local daemons:
<118>change net default: gateway 10.3.0.2
<118>.
<118>Mounting late file systems:
<118>.
<118>Removing stale Samba tdb files:
<118>.
<118>.
<118>.
<118>.
<118>.
<118>.
<118>.
<118> done
<118>missing Xauth password
<118>
<118>moused:
<118>unable to open /dev/psm0: No such file or directory
<118>
<118>Starting hald.
<118>Configuring syscons:
<118> keyrate
<118> blanktime
<118> screensaver
<118>.
<118>Local package initialization:
module_register: module uhub/umass already exists!
Module uhub/umass failed to register: 17
<118>kldload:
<118>can't load umass
<118>:
<118>File exists
<118>.
<118>
<118>Sat Sep 26 23:48:41 CEST 2009
<118>Sep 26 23:48:43 data kdm-bin[1041]: X server died during startup
<118>Sep 26 23:48:43 data kdm-bin[1041]: X server for display :0 cannot be started, session disabled
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me)
firewire0: bus manager 1
firewire0: fw_rcv: Unknown service addr 0xffff:0xf0000234 RREQQ(4) src=0xffc0 data=6d345284
firewire0: New S400 device ID:0000390000b587c8
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x10212
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff802c2374
stack pointer = 0x28:0xffffff80e8d958a0
frame pointer = 0x28:0xffffff80e8d958e0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = resume, IOPL = 0
current process = 0 (fw0_taskq)
panic: from debugger
cpuid = 0
Uptime: 32s
>How-To-Repeat:
Try to use fwip(4) driver.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909262208.n8QM8dkE089633>