Site Navigation

Date:      Wed, 18 Jul 2018 10:33:08 +0300
From:      Andrew Vylegzhanin <avv314@gmail.com>
To:        Kevin Oberman <rkoberman@gmail.com>
Cc:        Anthony Jenkins <Scoobi_doo@yahoo.com>,  "freebsd-acpi@freebsd.org" <freebsd-acpi@freebsd.org>, freebsd-hardware@freebsd.org
Subject:   Re: power off issues
Message-ID:  <CA%2BBi_YgX5LQf6CxnH%2B2SbQmRLZv8RpdcL3K88BP7ng=fiX3ARg@mail.gmail.com>
In-Reply-To: <CAN6yY1tHsTn-dGF2XM5Ry7ii8iUSaEYGqON5tqbYgohmGedhzw@mail.gmail.com>
References:  <CA%2BBi_YifByT49EEYKiDcvfy5AHRrrgAV64gjY=X3Ey97jd3U=Q@mail.gmail.com> <ebaef7d6-1f03-7824-1e7a-3e016d40aec7@yahoo.com> <CAN6yY1tHsTn-dGF2XM5Ry7ii8iUSaEYGqON5tqbYgohmGedhzw@mail.gmail.com>

---

next in thread | previous in thread | raw e-mail | index | archive | help

---

[-- Attachment #1 --]
Here is in attachment.

--
Andrew

2018-07-18 8:48 GMT+03:00 Kevin Oberman <rkoberman@gmail.com>:

> On Tue, Jul 17, 2018 at 5:54 PM, Anthony Jenkins via freebsd-acpi <
> freebsd-acpi@freebsd.org> wrote:
>
>> On 07/17/18 09:54, Andrew Vylegzhanin wrote:
>> > Hi!
>> >
>> > I have a following problem with Dell PowerEdge R740 servers:
>> > shutdown -p and shutdown -r does not perform power off or reseting
>> system
>> > actually.
>> >
>> > I need to do it manually or via iDRAC after.
>> >
>> > Counted on two systems.
>>
>> Can you post the output of dmesg(8)?  Want to see if there are any boot
>> ACPI errors.
>>
>> Anthony Jenkins
>>
>> >
>> > WBR,
>> > --
>> > Andrew
>>
>
> Better yet, post the contents of /var/run/dmesg. if it is the messages are
> too long, dmesg(8) output will be missing lines from the beginning. The
> file does not have the limit on length.
> --
> Kevin Oberman, Part time kid herder and retired Network Engineer
> E-mail: rkoberman@gmail.com
> PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
>
>

[-- Attachment #2 --]
ix6: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xc020-0xc03f mem 0xe1080000-0xe10fffff,0xe1104000-0xe1107fff irq 88 at device 0.0 numa-domain 1 on pci16
ix6: Using MSI-X interrupts with 2 vectors
ix6: Ethernet address: f8:f2:1e:0a:b7:50
ix6: PCI Express Bus: Speed 5.0GT/s Width x8
ix6: netmap queues/slots: TX 1/2048, RX 1/2048
ix7: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xc000-0xc01f mem 0xe1000000-0xe107ffff,0xe1100000-0xe1103fff irq 92 at device 0.1 numa-domain 1 on pci16
ix7: Using MSI-X interrupts with 2 vectors
ix7: Ethernet address: f8:f2:1e:0a:b7:51
ix7: PCI Express Bus: Speed 5.0GT/s Width x8
ix7: netmap queues/slots: TX 1/2048, RX 1/2048
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci17: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI PCI-PCI bridge> irq 103 at device 0.0 numa-domain 1 on pci17
pci18: <ACPI PCI bus> numa-domain 1 on pcib19
ix8: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xe020-0xe03f mem 0xee880000-0xee8fffff,0xee904000-0xee907fff irq 96 at device 0.0 numa-domain 1 on pci18
ix8: Using MSI-X interrupts with 2 vectors
ix8: Ethernet address: a0:36:9f:49:c8:d4
ix8: PCI Express Bus: Speed 5.0GT/s Width x8
ix8: netmap queues/slots: TX 1/2048, RX 1/2048
ix9: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xe000-0xe01f mem 0xee800000-0xee87ffff,0xee900000-0xee903fff irq 100 at device 0.1 numa-domain 1 on pci18
ix9: Using MSI-X interrupts with 2 vectors
ix9: Ethernet address: a0:36:9f:49:c8:d6
ix9: PCI Express Bus: Speed 5.0GT/s Width x8
ix9: netmap queues/slots: TX 1/2048, RX 1/2048
pci17: <dasp, performance counters> at device 14.0 (no driver attached)
pci17: <dasp, performance counters> at device 15.0 (no driver attached)
pci17: <dasp, performance counters> at device 18.0 (no driver attached)
pci17: <dasp, performance counters> at device 18.1 (no driver attached)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcf7ff,0xed800-0xf17ff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est3 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est4 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est5 attach returned 6
est6: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est6 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est7 attach returned 6
est8: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu8
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est8 attach returned 6
est9: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu9
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est9 attach returned 6
est10: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu10
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est10 attach returned 6
est11: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu11
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est11 attach returned 6
est12: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu12
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est12 attach returned 6
est13: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu13
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est13 attach returned 6
est14: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu14
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est14 attach returned 6
est15: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu15
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est15 attach returned 6
est16: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu16
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est16 attach returned 6
est17: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu17
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est17 attach returned 6
est18: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu18
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est18 attach returned 6
est19: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu19
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est19 attach returned 6
est20: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu20
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est20 attach returned 6
est21: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu21
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est21 attach returned 6
est22: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu22
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est22 attach returned 6
est23: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu23
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est23 attach returned 6
est24: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu24
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est24 attach returned 6
est25: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu25
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est25 attach returned 6
est26: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu26
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est26 attach returned 6
est27: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu27
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5e00001a00
device_attach: est27 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mfisyspd0 numa-domain 0 on mfi0
mfisyspd0: 572325MB (1172123568 sectors) SYSPD volume (deviceid: 0)
mfisyspd0:  SYSPD volume attached
ugen0.1: <0x8086 XHCI root HUB> at usbus0
mfisyspd1 numa-domain 0 on mfi0
mfisyspd1: 572325MB (1172123568 sectors) SYSPD volume (deviceid: 1)
mfisyspd1:  SYSPD volume attached
mfi0: 1653 (boot + 15s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0uhub0: 000000000000000
mfi0: 1654 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mfi0: 1655 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1656 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1657 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1658 (boot + 54s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1659 (584723460s/0x0020/info) - Time established as 07/12/18 15:11:00; (54 seconds since power on)
mfi0: 1660 (584723551s/0x0008/info) - Battery charge complete
mfi0: 1661 (584723590s/0x0020/info) - Host driver is loaded and operational
uhub0: 26 ports with 26 removable, self powered
mpr0: SAS Address from SAS device page0 = 5000c500947b19c1
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000a> enclosureHandle<0x0002> slot 0
mpr0: SAS Address from SAS device page0 = 5000c500947b0201
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000b> enclosureHandle<0x0002> slot 1
mpr0: SAS Address from SAS device page0 = 5000c500947b6139
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000c> enclosureHandle<0x0002> slot 2
mpr0: SAS Address from SAS device page0 = 5000c500947b1f95
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000d> enclosureHandle<0x0002> slot 3
ugen0.2: <Kb KVM -COMPOSITE> at usbus0
mpr0: SAS Address from SAS device page0 = 5000c500947b27f9
ukbd0mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000e> enclosureHandle<0x0002> slot 4
mpr0: SAS Address from SAS device page0 = 5000c500947b3c35
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000f> enclosureHandle<0x0002> slot 5
mpr0: SAS Address from SAS device page0 = 5000c500947afe51
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0010> enclosureHandle<0x0002> slot 6
mpr0: SAS Address from SAS device page0 = 5000c500947b576d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0011> enclosureHandle<0x0002> slot 7
mpr0:  numa-domain 0 on uhub0
SAS Address from SAS device page0 = 5000c500947b179d
ukbd0: mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 8
mpr0: SAS Address from SAS device page0 = 5000c500947b1f79
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0013> enclosureHandle<0x0002> slot 9
mpr0: SAS Address from SAS device page0 = 5000c500947b4755
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0014> enclosureHandle<0x0002> slot 10
mpr0: SAS Address from SAS device page0 = 5000c500947b37f5
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0015> enclosureHandle<0x0002> slot 11
<Kb> on usbus0
mpr0: SAS Address from SAS device page0 = 5000c500947b6435
kbd2 at ukbd0
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0017> enclosureHandle<0x0002> slot 12
mpr0: SAS Address from SAS device page0 = 5000c500947b591d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0018> enclosureHandle<0x0002> slot 13
mpr0: SAS Address from SAS device page0 = 5000c500947b3abd
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0019> enclosureHandle<0x0002> slot 14
mpr0: SAS Address from SAS device page0 = 5000c50094795f09
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001a> enclosureHandle<0x0002> slot 15
mpr0: SAS Address from SAS device page0 = 5000c500947b0e6d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001b> enclosureHandle<0x0002> slot 16
mpr0: SAS Address from SAS device page0 = 5000c500947b1315
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001c> enclosureHandle<0x0002> slot 17
mpr0: SAS Address from SAS device page0 = 5000c500947b14a5
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001d> enclosureHandle<0x0002> slot 22
mpr0: SAS Address from SAS device page0 = 5000c50094792e45
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001e> enclosureHandle<0x0002> slot 23
mpr0: SAS Address from SAS device page0 = 500304801eb38c3d
mpr0: Found device <4411<SmpInit,SspTarg,SepDev>,End Device> <12.0Gbps> handle<0x001f> enclosureHandle<0x0002> slot 24
mpr0: SAS Address from SAS device page0 = 500304801ebe55bd
mpr0: Found device <4411<SmpInit,SspTarg,SepDev>,End Device> <12.0Gbps> handle<0x0020> enclosureHandle<0x0003> slot 20
ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x1604 product 0x10c0> at usbus0
uhub2 numa-domain 0 on uhub1
uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 3> on usbus0
da0 at mpr0 bus 0 scbus16 target 8 lun 0
da2 at mpr0 bus 0 scbus16 target 10 lun 0
da3 at mpr0 bus 0 scbus16 target 11 lun 0
da9 at mpr0 bus 0 scbus16 target 17 lun 0
da0: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number ZAD28NVN0000C804B7MA
da0: 1200.000MB/s transfers
da0: Command Queueing enabled
da0: 5723166MB (11721045168 512 byte sectors)
da1 at mpr0 bus 0 scbus16 target 9 lun 0
da5 at mpr0 bus 0 scbus16 target 13 lun 0
da1: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number ZAD28P5C0000C804B94Z
da1: 1200.000MB/s transfers
da1: Command Queueing enabled
da1: 5723166MB (11721045168 512 byte sectors)
da9: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da9: Serial Number ZAD28NSS0000C804B5HM
da9: 1200.000MB/s transfers
da9: Command Queueing enabled
da9: 5723166MB (11721045168 512 byte sectors)
da14 at mpr0 bus 0 scbus16 target 22 lun 0
da2: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number ZAD28N2R0000C804B5XM
da2: 1200.000MB/s transfers
da2: Command Queueing enabled
da2: 5723166MB (11721045168 512 byte sectors)
da3: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da12 at mpr0 bus 0 scbus16 target 20 lun 0
da3: Serial Number ZAD28NSQ0000C804B5HK
da3: 1200.000MB/s transfers
da3: Command Queueing enabled
da3: 5723166MB (11721045168 512 byte sectors)
da13 at mpr0 bus 0 scbus16 target 21 lun 0
da5: da14: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da13: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da13: Serial Number ZAD28N680000C804BBA7
da13: 1200.000MB/s transfers
da13: Command Queueing enabled
da13: 5723166MB (11721045168 512 byte sectors)
da19 at mpr0 bus 0 scbus16 target 31 lun 0
da19: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da19: Serial Number ZAD283FS0000C803CQZ7
da19: 1200.000MB/s transfers
da19: Command Queueing enabled
da19: 5723166MB (11721045168 512 byte sectors)
da8 at mpr0 bus 0 scbus16 target 16 lun 0
da8: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da8: Serial Number ZAD28NWX0000C804B7NT
da8: 1200.000MB/s transfers
da8: Command Queueing enabled
da8: 5723166MB (11721045168 512 byte sectors)
da14: Serial Number ZAD28NH70000C804BAJZ
da14: 1200.000MB/s transfers
da14: Command Queueing enabled
da14: 5723166MB (11721045168 512 byte sectors)
da4 at mpr0 bus 0 scbus16 target 12 lun 0
da4: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number ZAD28NQ30000C804B570
da4: 1200.000MB/s transfers
da4: Command Queueing enabled
da4: 5723166MB (11721045168 512 byte sectors)
<SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number ZAD28NGT0000C804BATR
da5: 1200.000MB/s transfers
da5: Command Queueing enabled
da5: 5723166MB (11721045168 512 byte sectors)
da15 at mpr0 bus 0 scbus16 target 23 lun 0
da15: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da15: Serial Number ZAD282NZ0000C804B3BQ
da15: 1200.000MB/s transfers
da15: Command Queueing enabled
da15: 5723166MB (11721045168 512 byte sectors)
da10 at mpr0 bus 0 scbus16 target 18 lun 0
da10: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da10: Serial Number ZAD28NCP0000C804BB4C
da10: 1200.000MB/s transfers
da10: Command Queueing enabled
da10: 5723166MB (11721045168 512 byte sectors)
da12: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da12: Serial Number ZAD28N1G0000C804B5EN
da12: 1200.000MB/s transfers
da12: Command Queueing enabled
da12: 5723166MB (11721045168 512 byte sectors)
da7 at mpr0 bus 0 scbus16 target 15 lun 0
da16 at mpr0 bus 0 scbus16 target 24 lun 0
da7: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da7: Serial Number ZAD28N760000C804B6LL
da7: 1200.000MB/s transfers
da7: Command Queueing enabled
da7: 5723166MB (11721045168 512 byte sectors)
da18 at mpr0 bus 0 scbus16 target 30 lun 0
da18: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da18: Serial Number ZAD28NYK0000C804B8KM
da18: 1200.000MB/s transfers
da18: Command Queueing enabled
da18: 5723166MB (11721045168 512 byte sectors)
da17 at mpr0 bus 0 scbus16 target 25 lun 0
da17: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da17: Serial Number ZAD28NZ90000C804B8MU
da17: 1200.000MB/s transfers
da17: Command Queueing enabled
da17: 5723166MB (11721045168 512 byte sectors)
da16: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da16: Serial Number ZAD28NZW0000C804B8KK
da16: 1200.000MB/s transfers
da16: Command Queueing enabled
da16: 5723166MB (11721045168 512 byte sectors)
da6 at mpr0 bus 0 scbus16 target 14 lun 0
da6: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da6: Serial Number ZAD28P6M0000C804B9BU
da6: 1200.000MB/s transfers
da6: Command Queueing enabled
da6: 5723166MB (11721045168 512 byte sectors)
da11 at mpr0 bus 0 scbus16 target 19 lun 0
da11: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da11: Serial Number ZAD28NJH0000C804B5C0
da11: 1200.000MB/s transfers
da11: Command Queueing enabled
da11: 5723166MB (11721045168 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus15 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ses2 at mpr0 bus 0 scbus16 target 32 lun 0
ses2: <LSI SAS3x40 0601> Fixed Enclosure Services SPC-3 SCSI device
ses2: 1200.000MB/s transfers
ses2: Command Queueing enabled
ses2: SCSI-3 ENC Device
ses3 at mpr0 bus 0 scbus16 target 71 lun 0
ses3: <LSI SAS3x36 0601> Fixed Enclosure Services SPC-3 SCSI device
ses3: 1200.000MB/s transfers
ses3: Command Queueing enabled
ses3: SCSI-3 ENC Device
ses2: da0,pass2: Element descriptor: 'Slot00'
ses2: da0,pass2: SAS Device Slot Element: 1 Phys at Slot 0
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b19c1
ses2: da1,pass3: Element descriptor: 'Slot01'
ses2: da1,pass3: SAS Device Slot Element: 1 Phys at Slot 1
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b0201
ses2: da2,pass4: Element descriptor: 'Slot02'
ses2: da2,pass4: SAS Device Slot Element: 1 Phys at Slot 2
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b6139
ses2: da3,pass5: Element descriptor: 'Slot03'
ses2: da3,pass5: SAS Device Slot Element: 1 Phys at Slot 3
ses2:  phy 0: SAS device type 1 id 0
uhub2: ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b1f95
ses2: da4,pass6: Element descriptor: 'Slot04'
ses2: da4,pass6: SAS Device Slot Element: 1 Phys at Slot 4
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b27f9
ses2: da5,pass7: Element descriptor: 'Slot05'
ses2: da5,pass7: SAS Device Slot Element: 1 Phys at Slot 5
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b3c35
ses2: da6,pass8: Element descriptor: 'Slot06'
4 ports with 4 removable, self powered
ses2: da6,pass8: SAS Device Slot Element: 1 Phys at Slot 6
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947afe51
ses2: da7,pass9: Element descriptor: 'Slot07'
ses2: da7,pass9: SAS Device Slot Element: 1 Phys at Slot 7
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b576d
ses2: da8,pass10: Element descriptor: 'Slot08'
ses2: da8,pass10: SAS Device Slot Element: 1 Phys at Slot 8
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b179d
ses2: da9,pass11: Element descriptor: 'Slot09'
ses2: da9,pass11: SAS Device Slot Element: 1 Phys at Slot 9
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b1f79
ses2: da10,pass12: Element descriptor: 'Slot10'
ses2: da10,pass12: SAS Device Slot Element: 1 Phys at Slot 10
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b4755
ses2: da11,pass13: Element descriptor: 'Slot11'
ses2: da11,pass13: SAS Device Slot Element: 1 Phys at Slot 11
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b37f5
ses2: da12,pass14: Element descriptor: 'Slot12'
ses2: da12,pass14: SAS Device Slot Element: 1 Phys at Slot 12
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b6435
ses2: da13,pass15: Element descriptor: 'Slot13'
ses2: da13,pass15: SAS Device Slot Element: 1 Phys at Slot 13
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b591d
ses2: da14,pass16: Element descriptor: 'Slot14'
ses2: da14,pass16: SAS Device Slot Element: 1 Phys at Slot 14
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b3abd
ses2: da15,pass17: Element descriptor: 'Slot15'
ses2: da15,pass17: SAS Device Slot Element: 1 Phys at Slot 15
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c50094795f09
ses2: da16,pass18: Element descriptor: 'Slot16'
ses2: da16,pass18: SAS Device Slot Element: 1 Phys at Slot 16
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b0e6d
ses2: da17,pass19: Element descriptor: 'Slot17'
ses2: da17,pass19: SAS Device Slot Element: 1 Phys at Slot 17
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b1315
ses2: da18,pass20: Element descriptor: 'Slot22'
ses2: da18,pass20: SAS Device Slot Element: 1 Phys at Slot 22
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b14a5
ses2: da19,pass21: Element descriptor: 'Slot23'
ses2: da19,pass21: SAS Device Slot Element: 1 Phys at Slot 23
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c50094792e45
Trying to mount root from zfs:zroot/ROOT/default []...
ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
random: unblocking device.
bge2: link state changed to DOWN
ix0: changing name to 'das1'
ix1: changing name to 'das2'
ix2: changing name to 'das3'
ix3: changing name to 'das4'
ix4: changing name to 'das5'
ix5: changing name to 'das6'
ix6: changing name to 'das7'
ix7: changing name to 'das8'
bge2: link state changed to UP
uhid0 numa-domain 0 on uhub0
uhid0: <Kb> on usbus0
ums0 numa-domain 0 on uhub0
ums0: <Kb KVM -COMPOSITE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
mfi0: 1662 (584852400s/0x0020/info) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD
das4: link state changed to UP
das8: link state changed to UP
das7: link state changed to UP
das3: link state changed to UP
das6: link state changed to UP
das1: link state changed to UP
das5: link state changed to UP
das2: link state changed to UP
das1: link state changed to DOWN
das8: link state changed to DOWN
das6: link state changed to DOWN
das1: link state changed to UP
das5: link state changed to DOWN
das8: link state changed to UP
das2: link state changed to DOWN
das6: link state changed to UP
das7: link state changed to DOWN
das5: link state changed to UP
das4: link state changed to DOWN
das2: link state changed to UP
das3: link state changed to DOWN
das7: link state changed to UP
das4: link state changed to UP
das3: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 4d22h33m10s
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #2: Wed Jul 11 18:10:21 MSK 2018
    root@sv-dtrs-s2.sv.iaaras.lan:/usr/obj/usr/src/sys/DTRS amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) Gold 5120 CPU @ 2.20GHz (2194.92-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50654  Family=0x6  Model=0x55  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
  Structured Extended Features2=0x8<PKU>
  Structured Extended Features3=0xc000000<IBPB,STIBP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 274869518336 (262136 MB)
avail memory = 267017629696 (254647 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 28 CPUs
FreeBSD/SMP: 2 package(s) x 14 core(s)
ioapic6: Changing APIC ID to 16
ioapic7: Changing APIC ID to 17
ioapic8: Changing APIC ID to 18
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-31 on motherboard
ioapic2 <Version 2.0> irqs 32-39 on motherboard
ioapic3 <Version 2.0> irqs 40-47 on motherboard
ioapic4 <Version 2.0> irqs 48-55 on motherboard
ioapic5 <Version 2.0> irqs 72-79 on motherboard
ioapic6 <Version 2.0> irqs 80-87 on motherboard
ioapic7 <Version 2.0> irqs 88-95 on motherboard
ioapic8 <Version 2.0> irqs 96-103 on motherboard
SMP: AP CPU #23 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #24 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #27 Launched!
SMP: AP CPU #25 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #26 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #22 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1097460511 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f80550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
cpu1: <ACPI CPU> numa-domain 0 on acpi0
cpu2: <ACPI CPU> numa-domain 0 on acpi0
cpu3: <ACPI CPU> numa-domain 0 on acpi0
cpu4: <ACPI CPU> numa-domain 0 on acpi0
cpu5: <ACPI CPU> numa-domain 0 on acpi0
cpu6: <ACPI CPU> numa-domain 0 on acpi0
cpu7: <ACPI CPU> numa-domain 0 on acpi0
cpu8: <ACPI CPU> numa-domain 0 on acpi0
cpu9: <ACPI CPU> numa-domain 0 on acpi0
cpu10: <ACPI CPU> numa-domain 0 on acpi0
cpu11: <ACPI CPU> numa-domain 0 on acpi0
cpu12: <ACPI CPU> numa-domain 0 on acpi0
cpu13: <ACPI CPU> numa-domain 0 on acpi0
cpu14: <ACPI CPU> numa-domain 1 on acpi0
cpu15: <ACPI CPU> numa-domain 1 on acpi0
cpu16: <ACPI CPU> numa-domain 1 on acpi0
cpu17: <ACPI CPU> numa-domain 1 on acpi0
cpu18: <ACPI CPU> numa-domain 1 on acpi0
cpu19: <ACPI CPU> numa-domain 1 on acpi0
cpu20: <ACPI CPU> numa-domain 1 on acpi0
cpu21: <ACPI CPU> numa-domain 1 on acpi0
cpu22: <ACPI CPU> numa-domain 1 on acpi0
cpu23: <ACPI CPU> numa-domain 1 on acpi0
cpu24: <ACPI CPU> numa-domain 1 on acpi0
cpu25: <ACPI CPU> numa-domain 1 on acpi0
cpu26: <ACPI CPU> numa-domain 1 on acpi0
cpu27: <ACPI CPU> numa-domain 1 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <dasp, performance counters> at device 8.1 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x2068-0x206f,0x2074-0x2077,0x2040-0x205f mem 0x92d16000-0x92d17fff,0x92d1f000-0x92d1f0ff,0x92c80000-0x92cfffff irq 16 at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0x92d00000-0x92d0ffff irq 16 at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port 0x2060-0x2067,0x2070-0x2073,0x2020-0x203f mem 0x92d14000-0x92d15fff,0x92d1e000-0x92d1e0ff,0x92c00000-0x92c7ffff irq 16 at device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich7: <AHCI channel> at channel 1 on ahci1
ahcich8: <AHCI channel> at channel 2 on ahci1
ahcich9: <AHCI channel> at channel 3 on ahci1
ahcich10: <AHCI channel> at channel 4 on ahci1
ahcich11: <AHCI channel> at channel 5 on ahci1
ahcich12: <AHCI channel> at channel 6 on ahci1
ahcich13: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 numa-domain 0 on pci1
pci2: <ACPI PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92808000-0x9280bfff,0x92000000-0x927fffff at device 0.0 numa-domain 0 on pci2
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib4: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci3: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 39 at device 0.0 numa-domain 0 on pci3
pci4: <ACPI PCI bus> numa-domain 0 on pcib5
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd
mfi0: <Invader> port 0x4000-0x40ff mem 0x9db00000-0x9db0ffff,0x9da00000-0x9dafffff irq 32 at device 0.0 numa-domain 0 on pci4
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23 
mfi0: FW MaxCmds = 928, limiting to 128
mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0
mfi0: 1484 (580843723s/0x0020/info) - Shutdown command received from host
mfi0: 1485 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1486 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1487 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1488 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1489 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1490 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1491 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1492 (boot + 15s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
pcib6: mfi0: 1493 (boot + 15s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1494 (boot + 15s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1495 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1496 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1497 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1498 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1499 (boot + 30s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1500 (580843793s/0x0020/info) - Time established as 05/28/18 17:29:53; (30 seconds since power on)
mfi0: 1501 (580843922s/0x0020/info) - Host driver is loaded and operational
mfi0: 1502 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1503 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1504 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1505 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1506 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1507 (boot + 14s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1508 (boot + 14s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1509 (boot + 14s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1510 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1511 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1512 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1513 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1514 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1515 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1516 (boot + 30s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1517 (581091676s/0x0020/info) - Time established as 05/31/18 14:21:16; (30 seconds since power on)
mfi0: 1518 (581091816s/0x0020/info) - Host driver is loaded and operational
mfi0: 1519 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1520 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1521 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1522 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1523 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1524 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1525 (boot + 15s/0x0008/info) - Battery started charging
mfi0: 1526 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1527 (boot + 15s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1528 (boot + 15s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1529 (boot + 15s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1530 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1531 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1532 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1533 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1534 (boot + 55s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1535 (581101593s/0x0020/info) - Time established as 05/31/18 17:06:33; (55 seconds since power on)
mfi0: 1536 (581101743s/0x0020/info) - Host driver is loaded and operational
mfi0: 1537 (581102983s/0x0008/info) - Battery charge complete
mfi0: 1538 (581223600s/0x0020/info) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD
mfi0: 1539 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1540 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1541 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1542 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1543 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1544 (boot + 14s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1545 (boot + 14s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1546 (boot + 14s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1547 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1548 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1549 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1550 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1551 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1552 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1553 (boot + 37s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1554 (584204379s/0x0020/info) - Time established as 07/06/18 14:59:39; (37 seconds since power on)
<ACPI PCI-PCI bridge> irq 39 at device 2.0 numa-domain 0 on pci3
pci5: mfi0: 1555 (584204529s/0x0020/info) - Host driver is loaded and operational
mfi0: 1556 (584247600s/0x0020/info) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD
mfi0: 1557 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1558 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1559 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1560 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1561 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1562 (boot + 14s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1563 (boot + 14s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1564 (boot + 14s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1565 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1566 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1567 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1568 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1569 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1570 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1571 (boot + 36s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1572 (584446143s/0x0020/info) - Time established as 07/09/18 10:09:03; (36 seconds since power on)
mfi0: 1573 (584446274s/0x0020/info) - Host driver is loaded and operational
mfi0: 1574 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1575 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1576 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1577 (boot + 12s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1578 (boot + 12s/0x0020/info) - Board Revision A03
mfi0: 1579 (boot + 15s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1580 (boot + 15s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1581 (boot + 15s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1582 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1583 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1584 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1585 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1586 (boot + 16s/0x0008/info) - Battery temperature is normal
mfi0: 1587 (boot + 16s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1588 (boot + 36s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1589 (584448836s/0x0020/info) - Time established as 07/09/18 10:53:56; (36 seconds since power on)
mfi0: 1590 (584448968s/0x0020/info) - Host driver is loaded and operational
mfi0: 1591 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1592 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1593 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1594 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1595 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1596 (boot + 14s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1597 (boot + 14s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1598 (boot + 14s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1599 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1600 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1601 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1602 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1603 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1604 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1605 (boot + 36s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1606 (584634749s/0x0020/info) - Time established as 07/11/18 14:32:29; (36 seconds since power on)
mfi0: 1607 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1608 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1609 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1610 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1611 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1612 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1613 (boot + 15s/0x0008/info) - Battery started charging
mfi0: 1614 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1615 (boot + 15s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1616 (boot + 15s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1617 (boot + 15s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0<ACPI PCI bus> numa-domain 0 on pcib6
000000000000000
mfi0: 1618 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1619 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1620 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1621 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1622 (boot + 53s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1623 (584634959s/0x0020/info) - Time established as 07/11/18 14:35:59; (53 seconds since power on)
bge0: mfi0: 1624 (584635086s/0x0020/info) - Host driver is loaded and operational
mfi0: 1625 (584636221s/0x0008/info) - Battery charge complete
mfi0: 1626 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1627 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1628 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1629 (boot + 12s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1630 (boot + 12s/0x0020/info) - Board Revision A03
mfi0: 1631 (boot + 15s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1632 (boot + 15s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1633 (boot + 15s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1634 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1635 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1636 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1637 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1638 (boot + 16s/0x0008/info) - Battery temperature is normal
mfi0: 1639 (boot + 16s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1640 (boot + 33s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1641 (584637162s/0x0020/info) - Time established as 07/11/18 15:12:42; (33 seconds since power on)
mfi0: 1642 (584637294s/0x0020/info) - Host driver is loaded and operational
mfi0: 1643 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1644 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
mfi0: 1645 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1646 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1647 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1648 (boot + 15s/0x0008/info) - Battery temperature is normal
<Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x9d830000-0x9d83ffff,0x9d840000-0x9d84ffff,0x9d850000-0x9d85ffff irq 34 at device 0.0 numa-domain 0 on pci5
bge0: APE FW version: NCSI v1.4.14.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
mfi0: 1649 (boot + 15s/0x0008/info) - Battery started charging
mfi0: 1650 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1651 (boot + 15s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1652 (boot + 15s/0x0002/info) - Inserted: Encl PD 20
mfi0: 1653 (boot + 15s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0000000000000000
mfi0: 1654 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 1655 (boot + 15s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1656 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1657 (boot + 15s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1658 (boot + 54s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1659 (584723460s/0x0020/info) - Time established as 07/12/18 15:11:00; (54 seconds since power on)
mfi0: 1660 (584723551s/0x0008/info) - Battery charge complete
mfi0: 1661 (584723590s/0x0020/info) - Host driver is loaded and operational
mfi0: 1662 (584852400s/0x0020/info) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD
mfi0: 1663 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f42/1028)
mfi0: 1664 (boot + 10s/0x0020/info) - Firmware version 4.280.00-8186
miibus0: mfi0: 1665 (boot + 11s/0x0008/info) - Battery Present
mfi0: 1666 (boot + 11s/0x0020/info) - Package version 25.5.4.0006
mfi0: 1667 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 1668 (boot + 14s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 1669 (boot + 14s/0x0002/info) - Inserted: Encl PD 20
<MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 80:18:44:ed:cd:da
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x9d800000-0x9d80ffff,0x9d810000-0x9d81ffff,0x9d820000-0x9d82ffff irq 37 at device 0.1 numa-domain 0 on pci5
bge1: APE FW version: NCSI v1.4.14.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 80:18:44:ed:cd:db
pcib7: <ACPI PCI-PCI bridge> irq 39 at device 3.0 numa-domain 0 on pci3
pci6: <ACPI PCI bus> numa-domain 0 on pcib7
bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x9d930000-0x9d93ffff,0x9d940000-0x9d94ffff,0x9d950000-0x9d95ffff irq 35 at device 0.0 numa-domain 0 on pci6
bge2: APE FW version: NCSI v1.4.14.0
bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: 80:18:44:ed:cd:d8
bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x9d900000-0x9d90ffff,0x9d910000-0x9d91ffff,0x9d920000-0x9d92ffff irq 38 at device 0.1 numa-domain 0 on pci6
bge3: APE FW version: NCSI v1.4.14.0
bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: 80:18:44:ed:cd:d9
pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci7: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 47 at device 0.0 numa-domain 0 on pci7
pci8: <ACPI PCI bus> numa-domain 0 on pcib9
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x6020-0x603f mem 0xab080000-0xab0fffff,0xab104000-0xab107fff irq 40 at device 0.0 numa-domain 0 on pci8
ix0: Using MSI-X interrupts with 2 vectors
ix0: Ethernet address: f8:f2:1e:0a:af:4c
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 1/2048, RX 1/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x6000-0x601f mem 0xab000000-0xab07ffff,0xab100000-0xab103fff irq 44 at device 0.1 numa-domain 0 on pci8
ix1: Using MSI-X interrupts with 2 vectors
ix1: Ethernet address: f8:f2:1e:0a:af:4d
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 1/2048, RX 1/2048
pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci9: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 55 at device 0.0 numa-domain 0 on pci9
pci10: <ACPI PCI bus> numa-domain 0 on pcib11
mpr0: <Avago Technologies (LSI) SAS3008> port 0x8000-0x80ff mem 0xb8800000-0xb880ffff irq 48 at device 0.0 numa-domain 0 on pci10
mpr0: Firmware: 03.00.00.00, Driver: 18.03.00.00-fbsd
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
pci9: <dasp, performance counters> at device 14.0 (no driver attached)
pci9: <dasp, performance counters> at device 15.0 (no driver attached)
pci9: <dasp, performance counters> at device 18.0 (no driver attached)
pci9: <dasp, performance counters> at device 18.1 (no driver attached)
pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci11: <ACPI PCI bus> numa-domain 1 on pcib12
pci11: <dasp, performance counters> at device 8.1 (no driver attached)
pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci12: <ACPI PCI bus> numa-domain 1 on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 87 at device 0.0 numa-domain 1 on pci12
pci13: <ACPI PCI bus> numa-domain 1 on pcib14
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xb020-0xb03f mem 0xd3880000-0xd38fffff,0xd3904000-0xd3907fff irq 80 at device 0.0 numa-domain 1 on pci13
ix2: Using MSI-X interrupts with 2 vectors
ix2: Ethernet address: f8:f2:1e:0a:a5:84
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix2: netmap queues/slots: TX 1/2048, RX 1/2048
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xb000-0xb01f mem 0xd3800000-0xd387ffff,0xd3900000-0xd3903fff irq 84 at device 0.1 numa-domain 1 on pci13
ix3: Using MSI-X interrupts with 2 vectors
ix3: Ethernet address: f8:f2:1e:0a:a5:85
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: netmap queues/slots: TX 1/2048, RX 1/2048
pcib15: <ACPI PCI-PCI bridge> irq 87 at device 2.0 numa-domain 1 on pci12
pci14: <ACPI PCI bus> numa-domain 1 on pcib15
ix4: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xa020-0xa03f mem 0xd3a80000-0xd3afffff,0xd3b04000-0xd3b07fff irq 82 at device 0.0 numa-domain 1 on pci14
ix4: Using MSI-X interrupts with 2 vectors
ix4: Ethernet address: f8:f2:1e:0a:ae:94
ix4: PCI Express Bus: Speed 5.0GT/s Width x8
ix4: netmap queues/slots: TX 1/2048, RX 1/2048
ix5: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xa000-0xa01f mem 0xd3a00000-0xd3a7ffff,0xd3b00000-0xd3b03fff irq 85 at device 0.1 numa-domain 1 on pci14
ix5: Using MSI-X interrupts with 2 vectors
ix5: Ethernet address: f8:f2:1e:0a:ae:95
ix5: PCI Express Bus: Speed 5.0GT/s Width x8
ix5: netmap queues/slots: TX 1/2048, RX 1/2048
pcib16: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci15: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI PCI-PCI bridge> irq 95 at device 0.0 numa-domain 1 on pci15
pci16: <ACPI PCI bus> numa-domain 1 on pcib17
ix6: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xc020-0xc03f mem 0xe1080000-0xe10fffff,0xe1104000-0xe1107fff irq 88 at device 0.0 numa-domain 1 on pci16
ix6: Using MSI-X interrupts with 2 vectors
ix6: Ethernet address: f8:f2:1e:0a:b7:50
ix6: PCI Express Bus: Speed 5.0GT/s Width x8
ix6: netmap queues/slots: TX 1/2048, RX 1/2048
ix7: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xc000-0xc01f mem 0xe1000000-0xe107ffff,0xe1100000-0xe1103fff irq 92 at device 0.1 numa-domain 1 on pci16
ix7: Using MSI-X interrupts with 2 vectors
ix7: Ethernet address: f8:f2:1e:0a:b7:51
ix7: PCI Express Bus: Speed 5.0GT/s Width x8
ix7: netmap queues/slots: TX 1/2048, RX 1/2048
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci17: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI PCI-PCI bridge> irq 103 at device 0.0 numa-domain 1 on pci17
pci18: <ACPI PCI bus> numa-domain 1 on pcib19
ix8: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xe020-0xe03f mem 0xee880000-0xee8fffff,0xee904000-0xee907fff irq 96 at device 0.0 numa-domain 1 on pci18
ix8: Using MSI-X interrupts with 2 vectors
ix8: Ethernet address: a0:36:9f:49:c8:d4
ix8: PCI Express Bus: Speed 5.0GT/s Width x8
ix8: netmap queues/slots: TX 1/2048, RX 1/2048
ix9: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xe000-0xe01f mem 0xee800000-0xee87ffff,0xee900000-0xee903fff irq 100 at device 0.1 numa-domain 1 on pci18
ix9: Using MSI-X interrupts with 2 vectors
ix9: Ethernet address: a0:36:9f:49:c8:d6
ix9: PCI Express Bus: Speed 5.0GT/s Width x8
ix9: netmap queues/slots: TX 1/2048, RX 1/2048
pci17: <dasp, performance counters> at device 14.0 (no driver attached)
pci17: <dasp, performance counters> at device 15.0 (no driver attached)
pci17: <dasp, performance counters> at device 18.0 (no driver attached)
pci17: <dasp, performance counters> at device 18.1 (no driver attached)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcf7ff,0xed800-0xf17ff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est3 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est4 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est5 attach returned 6
est6: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est6 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est7 attach returned 6
est8: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu8
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est8 attach returned 6
est9: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu9
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est9 attach returned 6
est10: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu10
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a4f00001a00
device_attach: est10 attach returned 6
est11: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu11
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est11 attach returned 6
est12: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu12
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est12 attach returned 6
est13: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu13
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est13 attach returned 6
est14: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu14
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est14 attach returned 6
est15: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu15
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est15 attach returned 6
est16: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu16
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est16 attach returned 6
est17: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu17
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est17 attach returned 6
est18: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu18
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est18 attach returned 6
est19: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu19
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est19 attach returned 6
est20: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu20
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est20 attach returned 6
est21: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu21
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est21 attach returned 6
est22: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu22
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est22 attach returned 6
est23: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu23
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est23 attach returned 6
est24: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu24
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est24 attach returned 6
est25: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu25
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est25 attach returned 6
est26: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu26
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est26 attach returned 6
est27: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu27
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1a5600001a00
device_attach: est27 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mfisyspd0 numa-domain 0 on mfi0
mfisyspd0: 572325MB (1172123568 sectors) SYSPD volume (deviceid: 0)
mfisyspd0:  SYSPD volume attached
ugen0.1: <0x8086 XHCI root HUB> at usbus0
mfisyspd1 numa-domain 0 on mfi0
mfisyspd1: 572325MB (1172123568 sectors) SYSPD volume (deviceid: 1)
mfisyspd1:  SYSPD volume attached
mfi0: 1670 (boot + 14s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b375acd9fd,0uhub0: 000000000000000
mfi0: 1671 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mfi0: 1672 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82aa446,0000000000000000
mfi0: 1673 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 1674 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000393a82abd6a,0000000000000000
mfi0: 1675 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 1676 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 1677 (boot + 34s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 1678 (585150537s/0x0020/info) - Time established as 07/17/18 13:48:57; (34 seconds since power on)
mfi0: 1679 (585150666s/0x0020/info) - Host driver is loaded and operational
uhub0: 26 ports with 26 removable, self powered
mpr0: SAS Address from SAS device page0 = 5000c500947b19c1
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000a> enclosureHandle<0x0002> slot 0
mpr0: SAS Address from SAS device page0 = 5000c500947b0201
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000b> enclosureHandle<0x0002> slot 1
mpr0: SAS Address from SAS device page0 = 5000c500947b6139
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000c> enclosureHandle<0x0002> slot 2
mpr0: SAS Address from SAS device page0 = 5000c500947b1f95
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000d> enclosureHandle<0x0002> slot 3
mpr0: SAS Address from SAS device page0 = 5000c500947b27f9
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000e> enclosureHandle<0x0002> slot 4
mpr0: SAS Address from SAS device page0 = 5000c500947b3c35
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000f> enclosureHandle<0x0002> slot 5
mpr0: SAS Address from SAS device page0 = 5000c500947afe51
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0010> enclosureHandle<0x0002> slot 6
mpr0: SAS Address from SAS device page0 = 5000c500947b576d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0011> enclosureHandle<0x0002> slot 7
mpr0: SAS Address from SAS device page0 = 5000c500947b179d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 8
mpr0: SAS Address from SAS device page0 = 5000c500947b1f79
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0013> enclosureHandle<0x0002> slot 9
mpr0: SAS Address from SAS device page0 = 5000c500947b4755
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0014> enclosureHandle<0x0002> slot 10
mpr0: SAS Address from SAS device page0 = 5000c500947b37f5
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0015> enclosureHandle<0x0002> slot 11
ugen0.2: <Kb KVM -COMPOSITE> at usbus0
mpr0: SAS Address from SAS device page0 = 5000c500947b6435
ukbd0mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0017> enclosureHandle<0x0002> slot 12
 numa-domain 0 on uhub0
mpr0: SAS Address from SAS device page0 = 5000c500947b591d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0018> enclosureHandle<0x0002> slot 13
ukbd0: mpr0: <Kb> on usbus0
SAS Address from SAS device page0 = 5000c500947b3abd
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0019> enclosureHandle<0x0002> slot 14
kbd2 at ukbd0
mpr0: SAS Address from SAS device page0 = 5000c50094795f09
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001a> enclosureHandle<0x0002> slot 15
mpr0: SAS Address from SAS device page0 = 5000c500947b0e6d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001b> enclosureHandle<0x0002> slot 16
mpr0: SAS Address from SAS device page0 = 5000c500947b1315
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001c> enclosureHandle<0x0002> slot 17
mpr0: SAS Address from SAS device page0 = 5000c500947b14a5
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001d> enclosureHandle<0x0002> slot 22
mpr0: SAS Address from SAS device page0 = 5000c50094792e45
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x001e> enclosureHandle<0x0002> slot 23
mpr0: SAS Address from SAS device page0 = 500304801eb38c3d
mpr0: Found device <4411<SmpInit,SspTarg,SepDev>,End Device> <12.0Gbps> handle<0x001f> enclosureHandle<0x0002> slot 24
mpr0: SAS Address from SAS device page0 = 500304801ebe55bd
mpr0: Found device <4411<SmpInit,SspTarg,SepDev>,End Device> <12.0Gbps> handle<0x0020> enclosureHandle<0x0003> slot 20
ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x1604 product 0x10c0> at usbus0
uhub2 numa-domain 0 on uhub1
uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 3> on usbus0
da0 at mpr0 bus 0 scbus16 target 8 lun 0
da2 at mpr0 bus 0 scbus16 target 10 lun 0
da3 at mpr0 bus 0 scbus16 target 11 lun 0
da4 at mpr0 bus 0 scbus16 target 12 lun 0
da0: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number ZAD28NVN0000C804B7MA
da0: 1200.000MB/s transfersda4: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number ZAD28NQ30000C804B570
da4: 1200.000MB/s transfers
da4: Command Queueing enabled
da4: 5723166MB (11721045168 512 byte sectors)
da9 at mpr0 bus 0 scbus16 target 17 lun 0
da2: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number ZAD28N2R0000C804B5XM
da2: 1200.000MB/s transfers
da2: Command Queueing enabled
da2: 5723166MB (11721045168 512 byte sectors)
da18 at mpr0 bus 0 scbus16 target 30 lun 0
da3: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number ZAD28NSQ0000C804B5HK
da3: 1200.000MB/s transfers
da3: Command Queueing enabled
da3: 5723166MB (11721045168 512 byte sectors)

da0: Command Queueing enabled
da13 at mpr0 bus 0 scbus16 target 21 lun 0
da0: 5723166MB (11721045168 512 byte sectors)
da1 at mpr0 bus 0 scbus16 target 9 lun 0
da13: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da5 at mpr0 bus 0 scbus16 target 13 lun 0
da13: Serial Number ZAD28N680000C804BBA7
da13: 1200.000MB/s transfers
da13: Command Queueing enabled
da13: 5723166MB (11721045168 512 byte sectors)
da19 at mpr0 bus 0 scbus16 target 31 lun 0
da19: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da19: Serial Number ZAD283FS0000C803CQZ7
da19: 1200.000MB/s transfers
da19: Command Queueing enabled
da19: 5723166MB (11721045168 512 byte sectors)
da8 at mpr0 bus 0 scbus16 target 16 lun 0
da8: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da8: Serial Number ZAD28NWX0000C804B7NT
da8: 1200.000MB/s transfers
da8: Command Queueing enabled
da8: 5723166MB (11721045168 512 byte sectors)
da1: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number ZAD28P5C0000C804B94Z
da1: 1200.000MB/s transfers
da1: Command Queueing enabled
da1: 5723166MB (11721045168 512 byte sectors)
da9: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da9: Serial Number ZAD28NSS0000C804B5HM
da9: 1200.000MB/s transfers
da9: Command Queueing enabled
da9: 5723166MB (11721045168 512 byte sectors)
da14 at mpr0 bus 0 scbus16 target 22 lun 0
da14: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da14: Serial Number ZAD28NH70000C804BAJZ
da14: 1200.000MB/s transfers
da14: Command Queueing enabled
da14: 5723166MB (11721045168 512 byte sectors)
da5: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number ZAD28NGT0000C804BATR
da5: 1200.000MB/s transfers
da5: Command Queueing enabled
da5: 5723166MB (11721045168 512 byte sectors)
da15 at mpr0 bus 0 scbus16 target 23 lun 0
da15: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da15: Serial Number ZAD282NZ0000C804B3BQ
da15: 1200.000MB/s transfers
da15: Command Queueing enabled
da15: 5723166MB (11721045168 512 byte sectors)
da10 at mpr0 bus 0 scbus16 target 18 lun 0
da10: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da10: Serial Number ZAD28NCP0000C804BB4C
da10: 1200.000MB/s transfers
da10: Command Queueing enabled
da10: 5723166MB (11721045168 512 byte sectors)
da18: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da18: Serial Number ZAD28NYK0000C804B8KM
da18: 1200.000MB/s transfers
da18: Command Queueing enabled
da18: 5723166MB (11721045168 512 byte sectors)
da17 at mpr0 bus 0 scbus16 target 25 lun 0
da6 at mpr0 bus 0 scbus16 target 14 lun 0
da17: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da17: Serial Number ZAD28NZ90000C804B8MU
da17: 1200.000MB/s transfers
da17: Command Queueing enabled
da17: 5723166MB (11721045168 512 byte sectors)
da12 at mpr0 bus 0 scbus16 target 20 lun 0
da12: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da12: Serial Number ZAD28N1G0000C804B5EN
da12: 1200.000MB/s transfers
da12: Command Queueing enabled
da12: 5723166MB (11721045168 512 byte sectors)
da7 at mpr0 bus 0 scbus16 target 15 lun 0
da7: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da7: Serial Number ZAD28N760000C804B6LL
da7: 1200.000MB/s transfers
da7: Command Queueing enabled
da7: 5723166MB (11721045168 512 byte sectors)
da6: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da6: Serial Number ZAD28P6M0000C804B9BU
da6: 1200.000MB/s transfers
da6: Command Queueing enabled
da6: 5723166MB (11721045168 512 byte sectors)
da11 at mpr0 bus 0 scbus16 target 19 lun 0
da11: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da11: Serial Number ZAD28NJH0000C804B5C0
da11: 1200.000MB/s transfers
da11: Command Queueing enabled
da11: 5723166MB (11721045168 512 byte sectors)
da16 at mpr0 bus 0 scbus16 target 24 lun 0
da16: <SEAGATE ST6000NM0095 E003> Fixed Direct Access SPC-4 SCSI device
da16: Serial Number ZAD28NZW0000C804B8KK
da16: 1200.000MB/s transfers
da16: Command Queueing enabled
da16: 5723166MB (11721045168 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus15 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ses2 at mpr0 bus 0 scbus16 target 32 lun 0
ses2: <LSI SAS3x40 0601> Fixed Enclosure Services SPC-3 SCSI device
ses2: 1200.000MB/s transfers
ses2: Command Queueing enabled
ses2: SCSI-3 ENC Device
ses3 at mpr0 bus 0 scbus16 target 71 lun 0
ses3: <LSI SAS3x36 0601> Fixed Enclosure Services SPC-3 SCSI device
ses3: 1200.000MB/s transfers
ses3: Command Queueing enabled
ses3: SCSI-3 ENC Device
ses2: da0,pass2: Element descriptor: 'Slot00'
ses2: da0,pass2: SAS Device Slot Element: 1 Phys at Slot 0
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b19c1
ses2: da1,pass3: Element descriptor: 'Slot01'
ses2: da1,pass3: SAS Device Slot Element: 1 Phys at Slot 1
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b0201
ses2: da2,pass4: Element descriptor: 'Slot02'
ses2: da2,pass4: SAS Device Slot Element: 1 Phys at Slot 2
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b6139
ses2: da3,pass5: Element descriptor: 'Slot03'
ses2: da3,pass5: SAS Device Slot Element: 1 Phys at Slot 3
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b1f95
ses2: da4,pass6: Element descriptor: 'Slot04'
ses2: da4,pass6: SAS Device Slot Element: 1 Phys at Slot 4
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b27f9
ses2: da5,pass7: Element descriptor: 'Slot05'
ses2: da5,pass7: SAS Device Slot Element: 1 Phys at Slot 5
uhub2: ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b3c35
ses2: da6,pass8: Element descriptor: 'Slot06'
ses2: da6,pass8: SAS Device Slot Element: 1 Phys at Slot 6
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947afe51
ses2: da7,pass9: Element descriptor: 'Slot07'
ses2: da7,pass9: SAS Device Slot Element: 1 Phys at Slot 7
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b576d
ses2: da8,pass10: Element descriptor: 'Slot08'
ses2: da8,pass10: SAS Device Slot Element: 1 Phys at Slot 8
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b179d
ses2: da9,pass11: Element descriptor: 'Slot09'
4 ports with 4 removable, self powered
ses2: da9,pass11: SAS Device Slot Element: 1 Phys at Slot 9
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b1f79
ses2: da10,pass12: Element descriptor: 'Slot10'
ses2: da10,pass12: SAS Device Slot Element: 1 Phys at Slot 10
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b4755
ses2: da11,pass13: Element descriptor: 'Slot11'
ses2: da11,pass13: SAS Device Slot Element: 1 Phys at Slot 11
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b37f5
ses2: da12,pass14: Element descriptor: 'Slot12'
ses2: da12,pass14: SAS Device Slot Element: 1 Phys at Slot 12
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b6435
ses2: da13,pass15: Element descriptor: 'Slot13'
ses2: da13,pass15: SAS Device Slot Element: 1 Phys at Slot 13
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b591d
ses2: da14,pass16: Element descriptor: 'Slot14'
ses2: da14,pass16: SAS Device Slot Element: 1 Phys at Slot 14
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b3abd
ses2: da15,pass17: Element descriptor: 'Slot15'
ses2: da15,pass17: SAS Device Slot Element: 1 Phys at Slot 15
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c50094795f09
ses2: da16,pass18: Element descriptor: 'Slot16'
ses2: da16,pass18: SAS Device Slot Element: 1 Phys at Slot 16
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b0e6d
ses2: da17,pass19: Element descriptor: 'Slot17'
ses2: da17,pass19: SAS Device Slot Element: 1 Phys at Slot 17
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b1315
ses2: da18,pass20: Element descriptor: 'Slot22'
ses2: da18,pass20: SAS Device Slot Element: 1 Phys at Slot 22
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c500947b14a5
ses2: da19,pass21: Element descriptor: 'Slot23'
ses2: da19,pass21: SAS Device Slot Element: 1 Phys at Slot 23
ses2:  phy 0: SAS device type 1 id 0
ses2:  phy 0: protocols: Initiator( None ) Target( SSP )
ses2:  phy 0: parent 500304801eb38c3f addr 5000c50094792e45
Trying to mount root from zfs:zroot/ROOT/default []...
ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
random: unblocking device.
bge2: link state changed to DOWN
ix0: changing name to 'das1'
ix1: changing name to 'das2'
ix2: changing name to 'das3'
ix3: changing name to 'das4'
ix4: changing name to 'das5'
ix5: changing name to 'das6'
ix6: changing name to 'das7'
ix7: changing name to 'das8'
bge2: link state changed to UP
uhid0 numa-domain 0 on uhub0
uhid0: <Kb> on usbus0
ums0 numa-domain 0 on uhub0
ums0: <Kb KVM -COMPOSITE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0

---

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BBi_YgX5LQf6CxnH%2B2SbQmRLZv8RpdcL3K88BP7ng=fiX3ARg>

Legal Notices | © 1995-2025 The FreeBSD Project. All rights reserved.

Contact