Date: Fri, 1 Aug 2003 11:53:17 +0300 From: root@bofh.bg To: current@freebsd.org Subject: Dummy: PCM causes freezes Message-ID: <1059727997.3f2a2a7dd8118@mail.orbitel.bg>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi!
I got a problem with the pcm driver - on the startup of whatever sound
application by whatever user - root, me, etc it freezes my machine.
I experienced this both on 5.1RElease and 5.1-STABLE(24.07.2003CVSUP). The card
is ESS 1938(SOLO-1) The thing happens over and over again. Here is what I do:
add pcm to the kernel file, make build&&install{kernel}. Reboot,
build+installworld and on the next reboot start KDE,mpg123,etc and face the music.
I googled and found some info that the needed driver must be loaded in
loader.conf like: `snd_es_1938_load="YES"`.
However, even without this, I see my ESS Card attached at pcm0. Can anyone give
hints and help me out bypass this system freeze caused by the pcm?
Attached is my dmesg.boot of my new kernel.
TIA,
Dimitar
[-- Attachment #2 --]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Fri Aug 1 10:28:08 EEST 2003
root@Assasino.orbitel.bg:/usr/obj/usr/src/sys/KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0799000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07991f4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 367503181 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (367.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (191 MB)
avail memory = 187043840 (178 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HOT661 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f at device 7.2 on pci0
pcib0: slot 7 INTD is routed to irq 5
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Solo-1E> port 0x7800-0x7803,0x7400-0x7403,0x7000-0x700f,0x6c00-0x6c0f,0x6800-0x683f irq 11 at device 10.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0x7c00-0x7cff mem 0xe4000000-0xe40000ff irq 10 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:c0:26:83:f3:94
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3e8-0x3ef irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <WIN5602 MODEM LINE INTERFACE CARD.> can't assign resources (irq)
Timecounters tick every 1.000 msec
DUMMYNET initialized (011031)
BRIDGE 020214 loaded
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata0-master UDMA33
ad1: 6149MB <WDC AC26400R> [13328/15/63] at ata0-slave UDMA33
acd0: CD-RW <CD-W524E> at ata1-master PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC CD-W524E 1.0B> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [315200 x 2048 byte records]
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
/: mount pending error: blocks 60 files 1
WARNING: /home was not properly dismounted
/home: mount pending error: blocks 2136 files 8
/home: superblock summary recomputed
WARNING: /tmp was not properly dismounted
/tmp: superblock summary recomputed
WARNING: /usr was not properly dismounted
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1059727997.3f2a2a7dd8118>