Date: Wed, 15 Sep 2004 21:53:59 GMT From: "Leroy R. van Logchem" <Leroy.vanLogchem@wldelft.nl> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it Message-ID: <200409152153.i8FLrxCT001597@www.freebsd.org> Resent-Message-ID: <200409152200.i8FM0iP4085757@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 71778
>Category: kern
>Synopsis: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Sep 15 22:00:43 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Leroy R. van Logchem
>Release: 5.3-BETA3
>Organization:
WL | delft hydraulics
>Environment:
FreeBSD 5.3-BETA3
Supermicro 6013P8 server
Adaptec AIC-7902 with Adaptec 2015S module. I2O
Dual 36GB scsi onboard (being mirrored by the 2015S)
External Eonstor A08 raid cabinet
>Description:
The FreeBSD 5.3-BETA installer says no drives found.
Long problem description:
------------------------------
This occurs when using first install cd. On the system is still a
working FBSD 4.10 install
which can use all drives connected to the Adaptec 2015S.
The bios output of the controller:
-------------------------------------
The Adaptec 2015S bios shows:
Controller: 0xF8300000 IRQ:5
Drive: (0,0,0) Adaptec RAID1 34GB
Proc: (0,6,0) SUPER GEM318
Drive: (1,0,0) IFT ES A08U-G 697GB
Drive: (1,0,1) IFT ES A08U-G 687GB
The 5.3-BETA3 bootloader reports:
Bios Drive C: is disk1
Bios Drive D: is disk2
Bios Drive E: is disk3
System hardware:
---------------------
Supermicro 6013P8 server
Adaptec AIC-7902 with Adaptec 2015S module.
Dual 36GB scsi onboard (being mirrored using the 2015S)
External Eonstor A08 raid cabinet.
Dmesg output captured using the live-cd:
----------------------------------------------
opyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3
root at mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,
HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073217536 (1023 MB)
avail memory = 1036460032 (988 MB)
MPTable: < Kings Canyon>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib2: <MPTable PCI-PCI bridge> at device 29.0 on pci1
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0x3000-0x303f mem 0xf8200000-0xf821ffff irq 54 at device 3.0 on p
ci2
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:30:48:2a:53:be
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0x3040-0x307f mem 0xf8220000-0xf823ffff irq 55 at device 3.1 on p
ci2
em1: [GIANT-LOCKED]
em1: Ethernet address: 00:30:48:2a:53:bf
em1: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib3: <MPTable PCI-PCI bridge> at device 31.0 on pci1
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem
0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf83fffff irq 30
at device 3.0 on pci3
asr0: [GIANT-LOCKED]
asr0: ADAPTEC 2015S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
0x2000-0x201f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
0x2020-0x203f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci4: <PCI bus> on pcib4
pci4: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x2060-0x206f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem
0xe0000-0xe3fff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model VersaPad, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ahc0: No resources alloated.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
ahc0: No resources alloated.
ahc0: No resources alloated.
ahc0: No resources alloated.
ahc0: No resources alloated.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09d4800
ATAPI_RESET time = 40us
acd0: CDROM <CD-224E/1.9A> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/md0
>How-To-Repeat:
Use a Supermicro 6013P8's with Adaptec 2015 SCSI. Boot the FreeBSD 5.3-BETA2 or 3 installation cd.
>Fix:
No fix but 4.10-RELEASE can see and use the scsi drives and external attached raid-cabinets.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409152153.i8FLrxCT001597>