Date: Tue, 14 Oct 2025 14:23:51 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: olce@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #26989 - Still Failing Message-ID: <357257060.1301.1760451831934@jenkins.ci.freebsd.org> In-Reply-To: <799639133.1289.1760450041055@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #26989 (2110ae0ef9d6ca8cf52b29fcaf926c4343f56826) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26989/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26989/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26989/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) bda3b61512b2597d4c77d2b9c9074b844dec0405 by olce: sys/rpc: UNIX auth: Rename 'ngroups' => 'supp_ngroups' for clarity 47e9c81d4f1324674c624df02a51ad3a72aa7444 by olce: sys/rpc: UNIX auth: Fix OOB accesses, notably writes on decode f7c4f800cc0b4fac1c99cda8e22d46b67592f9fa by olce: sys/rpc: Define AUTH_SYS_MAX_{GROUPS,HOSTNAME} b119ef0f6a81eb32b0e1cd0075cec499543e7ddd by olce: sys/rpc: UNIX auth: Use AUTH_SYS_MAX_{GROUPS,HOSTNAME} as limits (1/2) e665c0f6f7a611d25d9d7e7f64d98c84b3a92820 by olce: sys/rpc: UNIX auth: Use AUTH_SYS_MAX_{GROUPS,HOSTNAME} as limits (2/2) d4cc791f3b2e1b6926420649a481eacaf3bf268e by olce: sys/rpc: UNIX auth: Fix OOB reads on too short message 4ae70c3ea498e06676040ee99254d261e29ae82e by olce: sys/rpc: UNIX auth: Support XDR_FREE a4105a5d4e179aa1ef661ee45d6008e83fefd2a7 by olce: sys/rpc: UNIX auth: Style: Remove unnecessary headers, minor changes 2110ae0ef9d6ca8cf52b29fcaf926c4343f56826 by olce: sys/rpc: UNIX auth: Do not log on bogus AUTH_SYS messages The end of the build log: [...truncated 3.85 MiB...] epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.268s] sys/netinet/multicast:IP_ADD_MEMBERSHIP_ip_mreqn -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:00:b9 epair1b: Ethernet address: 58:9c:fc:10:24:51 epair1a: link state changed to UP epair1b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.234s] sys/netinet/multicast:MCAST_JOIN_GROUP -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:00:b9 epair1b: Ethernet address: 58:9c:fc:10:24:51 epair1a: link state changed to UP epair1b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.244s] sys/netinet/output:output_raw_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:00:b9 epair1b: Ethernet address: 58:9c:fc:10:24:51 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.629s] sys/netinet/output:output_raw_success -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.184s] sys/netinet/output:output_tcp_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:00:b9 epair1b: Ethernet address: 58:9c:fc:10:24:51 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [2.550s] sys/netinet/output:output_tcp_setup_success -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.266s] sys/netinet/output:output_udp_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:00:b9 epair1b: Ethernet address: 58:9c:fc:10:24:51 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [8.415s] sys/netinet/output:output_udp_setup_success -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [1.312s] sys/netinet/redirect:valid_redirect -> epair0a: Ethernet address: 58:9c:fc:10:77:9e epair0b: Ethernet address: 58:9c:fc:10:a8:71 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.118s] sys/netinet/so_reuseport_lb_test:basic_ipv4 -> passed [0.848s] sys/netinet/so_reuseport_lb_test:basic_ipv6 -> Limiting tcp reset response from 18618 to 209 packets/sec passed [0.836s] sys/netinet/so_reuseport_lb_test:bind_without_listen -> passed [0.006s] sys/netinet/so_reuseport_lb_test:concurrent_add -> passed [2.596s] sys/netinet/so_reuseport_lb_test:connect_bound -> passed [0.005s] sys/netinet/so_reuseport_lb_test:connect_not_bound -> passed [0.004s] sys/netinet/so_reuseport_lb_test:double_listen_ipv4 -> passed [0.004s] sys/netinet/so_reuseport_lb_test:double_listen_ipv6 -> passed [0.004s] sys/netinet/socket_afinet:socket_afinet -> passed [0.004s] sys/netinet/socket_afinet:socket_afinet_bind_connected_port -> passed [0.007s] sys/netinet/socket_afinet:socket_afinet_bind_ok -> passed [0.004s] sys/netinet/socket_afinet:socket_afinet_bind_zero -> skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781) [0.004s] sys/netinet/socket_afinet:socket_afinet_bindany -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet_multibind -> passed [0.161s] sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet_poll_rdhup -> passed [0.005s] sys/netinet/socket_afinet:socket_afinet_stream_reconnect -> passed [0.004s] sys/netinet/tcp_connect_port_test:basic_ipv4 -> Limiting tcp reset response from 13581 to 198 packets/sec Limiting tcp reset response from 17026 to 208 packets/sec Limiting tcp reset response from 15056 to 187 packets/sec Limiting tcp reset response from 14951 to 200 packets/sec Limiting tcp reset response from 15028 to 209 packets/sec passed [4.187s] sys/netinet/tcp_connect_port_test:basic_ipv6 -> Limiting tcp reset response from 18662 to 191 packets/sec Limiting tcp reset response from 17057 to 184 packets/sec Limiting tcp reset response from 13612 to 197 packets/sec Limiting tcp reset response from 13564 to 189 packets/sec passed [4.180s] TCP HPTS started 2 ((unbounded)) swi interrupt threads sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_concurrent_operations -> failed: /usr/tests/atf_python/sys/netlink/netlink.py:376: ValueError [0.458s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_cpu_assignment -> passed [0.335s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_deferred_requests -> failed: /usr/tests/atf_python/sys/netlink/netlink.py:376: ValueError [0.474s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_direct_wake_mechanism -> Sleeping on "-" with the following non-sleepable locks held: exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff80147c8c100) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467 stack backtrace: #0 0xffffffff80c061dc at witness_debugger+0x6c #1 0xffffffff80c073f0 at witness_warn+0x430 #2 0xffffffff80b9a928 at _sleep+0x58 #3 0xffffffff80bf8e91 at taskqueue_thread_loop+0xc1 #4 0xffffffff80b3e472 at fork_exit+0x82 #5 0xffffffff810b45ce at fork_trampoline+0xe Sleeping on "-" with the following non-sleepable locks held: exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff80147c8c100) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467 stack backtrace: #0 0xffffffff80c061dc at witness_debugger+0x6c #1 0xffffffff80c073f0 at witness_warn+0x430 #2 0xffffffff80b9a928 at _sleep+0x58 #3 0xffffffff80bf8e91 at taskqueue_thread_loop+0xc1 #4 0xffffffff80b3e472 at fork_exit+0x82 #5 0xffffffff810b45ce at fork_trampoline+0xe Sleeping thread (tid 119997, pid 0) owns a non-sleepable lock KDB: stack backtrace of thread 119997: sched_switch() at sched_switch+0x5e2/frame 0xfffffe008beb5dc0 mi_switch() at mi_switch+0x172/frame 0xfffffe008beb5de0 sleepq_switch() at sleepq_switch+0x109/frame 0xfffffe008beb5e20 _sleep() at _sleep+0x2a5/frame 0xfffffe008beb5ec0 taskqueue_thread_loop() at taskqueue_thread_loop+0xc1/frame 0xfffffe008beb5ef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008beb5f30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008beb5f30 --- trap 0x3, rip = 0x1950a9194210, rsp = 0x1950a9194300, rbp = 0x1950a9126bf8 --- panic: sleeping thread holds tcp_hpts_lck cpuid = 1 time = 1760451830 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008bf0fb20 vpanic() at vpanic+0x136/frame 0xfffffe008bf0fc50 panic() at panic+0x43/frame 0xfffffe008bf0fcb0 propagate_priority() at propagate_priority+0x2a6/frame 0xfffffe008bf0fcf0 turnstile_wait() at turnstile_wait+0x399/frame 0xfffffe008bf0fd30 __mtx_lock_sleep() at __mtx_lock_sleep+0x1c1/frame 0xfffffe008bf0fdc0 __mtx_lock_flags() at __mtx_lock_flags+0xdd/frame 0xfffffe008bf0fe10 tcp_hpts_thread() at tcp_hpts_thread+0x2a/frame 0xfffffe008bf0fe60 ithread_loop() at ithread_loop+0x266/frame 0xfffffe008bf0fef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008bf0ff30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008bf0ff30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 12 tid 119999 ] Stopped at kdb_enter+0x33: movq $0,0x121d0a2(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 1 dynamic pcpu = 0xfffffe008d1c25c0 curthread = 0xfffff8005f47b780: pid 12 tid 119999 critnest 1 "swi1: hpts" curpcb = 0xfffff8005f47bcd0 fpcurthread = none idlethread = 0xfffff8000460b000: tid 100004 "idle: cpu1" self = 0xffffffff82611000 curpmap = 0xffffffff81d9f520 tssp = 0xffffffff82611384 rsp0 = 0xfffffe008bf10000 kcr3 = 0x800000000259b002 ucr3 = 0xffffffffffffffff scr3 = 0x22c0688ea gs32p = 0xffffffff82611404 ldt = 0xffffffff82611444 tss = 0xffffffff82611434 curvnet = 0 spin locks held: db:0:kdb.enter.panic> reset Uptime: 28m40s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26989' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./auto-shutdown x ./disable-dtrace-tests.sh x ./run.sh x ./run-kyua.sh x ./disable-zfs-tests.sh x ./disable-notyet-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins6144274288552608960.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '2110ae0ef9d6ca8cf52b29fcaf926c4343f56826', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../2110ae0ef9d6ca8cf52b29fcaf926c4343f56826/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?357257060.1301.1760451831934>