Date: Wed, 24 Mar 2004 13:42:40 -0800 From: "Kevin Oberman" <oberman@es.net> To: current@freebsd.org Subject: Regression in CardBus Message-ID: <20040324214240.1C70D5D08@ptavv.es.net>
next in thread | raw e-mail | index | archive | help
I am running current as of last Saturday (3/13). On a recent trip I had to dial in to work at the airport. I inserted my trusty Xircom RBEM56G-100 combo Ethernet/modem card which I have been using for over a year on current, but have not used for several months. I get the following messages on insertion: dc0: <Xircom X3201 10/100BaseTX> port 0x1100-0x117f mem 0x20000000-0x200007ff,0x20000800-0x20000fff irq 11 at device 0.0 on cardbus1 miibus1: <MII bus> on dc0 tdkphy0: <TDK 78Q2120 media interface> on miibus1 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:10:a4:e0:07:4f sio4: configured irq 11 not in bitmap of probed irqs 0 sio4: port may not be enabled sio4: configured irq 11 not in bitmap of probed irqs 0 sio4: port may not be enabled cardbus1: <simple comms, UART> at device 0.1 (no driver attached) Huh? All PCMCIA cards share the same IRQ and to works OK for the Ethernet, but not the serial interface. It behaved just fine in the past. Due to the LONG time since I last ran it (possibly not sine last September), it will likely take me a while to track down just when it broke, so I'm hoping that someone has an idea that could save me some time. I don't recall seeing this reported, although there are reports of some problems with sio devices that might be related. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040324214240.1C70D5D08>