Date: Wed, 8 Sep 2004 18:22:02 -0400 From: "Carroll Kong" <me@carrollkong.com> To: "Eduard Martinescu" <martines@rochester.rr.com>, <freebsd-stable@freebsd.org> Subject: Re: 3ware 7506, FreeBSD 4.x, Maxtor Disks & SMART Problems. Message-ID: <18ac01c495f2$45095400$0200a8c0@athena> References: <40CD80F1.6020107@mintel.com> <40CDAA9A.1090507@mintel.com> <17b501c495d9$84af2850$0200a8c0@athena> <200409081645.31815.martines@rochester.rr.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I installed autoconf2.59, automake1.8 and compiled the CVS version using gmake. I got this error when I ran this command. saint# ./smartctl -a -d 3ware,0 /dev/twe0 smartctl version 5.33 [i386-unknown-freebsd4.10] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Smartctl open device: /dev/twe0 failed: Inappropriate ioctl for device This is the same error I got with version 5.3.0. (install via freebsd ports) I am using a pretty old firmware, do yuo think that might be it? Or is it possible this only works with FreeBSD 5.x? - Carroll Kong ----- Original Message ----- From: "Eduard Martinescu" <martines@rochester.rr.com> To: <freebsd-stable@freebsd.org> Cc: "Carroll Kong" <me@carrollkong.com>; "Jason Thomson" <jason.thomson@mintel.com>; <so14k@so14k.com>; <vkayshap@amcc.com> Sent: Wednesday, September 08, 2004 4:45 PM Subject: Re: 3ware 7506, FreeBSD 4.x, Maxtor Disks & SMART Problems. > If you want to test out the experimental 3ware support in smartmontools, you > can check out the CVS version or wait a few days for the 5.33 release (not > sure when ports will be updated, however, as this is not a 'stable' release). > > I have added support for 7xxx series 3ware controllers (/dev/twe*), and I'm > currently working on supporting the 9xxx series 3ware controllers > (/dev/twa*). > > Ed > On Wednesday 08 September 2004 03:24 pm, Carroll Kong wrote: > > Hi, in reference to this > > http://lists.freebsd.org/pipermail/freebsd-stable/2004-June/007828.html > > > > I have a FreeBSD 4.10-p2 system, using a 7450 with 4xMAXTOR 6L080J4 (80 > > gig) disks. > > > > Raid 5 setup. > > > > Monitor version: ME7X 1.01.00.035 > > Firmware version: FE7X 1.05.00.036 > > BIOS version: BE7X 1.08.00.044 > > > > > > (Firmware 7.5.3 basically). > > > > I am also having the same problems you are having. Randomly under heavy > > I/O the system will just halt I/O requests. No error messages on the > > console, it would just start to hang and halt completely. (no kernel > > panics at all). > > > > I believe I have the same problem you do. Were you able to resolve the > > issue or narrow it down? The machine is not local, but I am curious if you > > did resolve it, what version of FreeBSD did you have? What firmware? And > > did you have to do the powermax testing on all the disks or not? > > > > I cannot easily do the powermax testing yet, and my firmware is older and I > > am still running into this problem (which should have all the twe driver > > fixes). > > > > I tried using "Smartmontools" to verify if the Maxtor disks are okay since > > they only work for Linux + 3Ware. > > > > Thanks in advance! > > > > > > > > - Carroll Kong > > > > > > > > _______________________________________________ > > freebsd-stable@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?18ac01c495f2$45095400$0200a8c0>