Date: Fri, 18 Sep 1998 00:15:08 -0400 (EDT) From: Snob Art Genre <benedict@echonyc.com> To: current@FreeBSD.ORG Subject: cam oddities Message-ID: <Pine.GSO.4.02.9809180010330.15209-200000@echonyc.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
multivac% rlogin narcissus
<hanging, ^C>
multivac% rlogin narcissus
longjmp botch
multivac%
I ran the command again and it worked. Immediately before this, on
narcissus' console:
narcissus# Sep 18 00:07:59 narcissus /kernel: (da1:bt0:0:6:0): CCB
0xf4a259c0 -
timed out
Sep 18 00:07:59 narcissus /kernel: (da1:bt0:0:6:0): CCB 0xf4a259c0 -
timed out
Sep 18 00:08:07 narcissus /kernel: (da1:bt0:0:6:0): CCB 0xf4a259c0 -
timed out
Sep 18 00:08:07 narcissus /kernel: bt0: No longer in timeout
Sep 18 00:08:07 narcissus /kernel: (da1:bt0:0:6:0): CCB 0xf4a259c0 -
timed out
Sep 18 00:08:07 narcissus /kernel: bt0: No longer in timeout
Sep 18 00:08:07 narcissus rlogind[21819]: Connection from 10.0.0.1 on
illegal port
This last might have been triggered by a strobe I was running to see
what ports were open on narcissus.
I was running a make world when this happened. It paused for a good
long time, but it didn't die.
Ben
"You have your mind on computers, it seems."
[-- Attachment #2 --]
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #3: Thu Sep 17 06:46:01 EDT 1998
ben@narcissus.net:/usr/src/sys/compile/EVENNEWER
Timecounter "i8254" frequency 1193182 Hz cost 3499 ns
Timecounter "TSC" frequency 199432668 Hz cost 225 ns
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x617 Stepping=7
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 100663296 (98304K bytes)
avail memory = 95563776 (93324K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
vga0: <S3 ViRGE graphics accelerator> rev 0x06 int a irq 11 on pci0.11.0
bt0: <Buslogic Multimaster SCSI host adapter> rev 0x08 int a irq 9 on pci0.15.0
bt0: BT-948 FW Rev. 5.05R Ultra Narrow SCSI Host Adapter, SCSI ID 7, 192 CCBs
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 00:40:05:1e:df:32, type NE2000 (16 bit)
pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
bt: unit number (1) too high
bt1 not found
npx0 on motherboard
npx0: INT 16 interface
changing root device to da0s1a
da0 at bt0 bus 0 target 0 lun 0
da0: <CONNER CFP2107S 2.14GB 5767> Fixed Direct Access SCSI2 device
da0: 3.300MB/s transfers, Tagged Queueing Enabled
da0: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da1 at bt0 bus 0 target 6 lun 0
da1: <QUANTUM FIREBALL_TM3200S 300X> Fixed Direct Access SCSI2 device
da1: 3.300MB/s transfers, Tagged Queueing Enabled
da1: 3067MB (6281856 512 byte sectors: 255H 63S/T 391C)
cd0 at bt0 bus 0 target 2 lun 0
cd0: <PLEXTOR CD-ROM PX-8XCS 1.02> Removable CD-ROM SCSI2 device
cd0: 3.300MB/s transfers
cd0: cd present [201575 x 2048 byte records]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.02.9809180010330.15209-200000>