Date: Thu, 29 Oct 2015 09:43:47 -0400 From: Adrian Chadd <adrian.chadd@gmail.com> To: Eugene Grosbein <eugen@grosbein.net> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: arge1 on TL WDR3600 Message-ID: <CAJ-Vmom1Tagn6WL-qfNZ7xqPznrLygB6JzMMJdyLU=ROybnEGA@mail.gmail.com> In-Reply-To: <56321ED9.4050602@grosbein.net> References: <562CBEC3.8030308@rdtc.ru> <CAJ-Vmok__9mD8OaFnU-sfVfr=xMRMW6-nfDUHScT_LNm6Ry2iA@mail.gmail.com> <562E3027.4020806@grosbein.net> <CAJ-VmonRt6OVOQDGLZBx-4OxbGgzcetuKtBf3eB-6yn3m-EEsQ@mail.gmail.com> <562F75E2.9000505@grosbein.net> <CAJ-VmomocPQ=%2BjKYt8bsLHEWjT1vz=37U_yNB3YMsmxz__5qVw@mail.gmail.com> <CAJ-Vmo=BRP-vyg5=7cyA9v9c_cDjo6Ozv0SLmNj3RZGCKjLYAg@mail.gmail.com> <CAJ-VmokD2vHZ0%2BzO655_csRQw==JUDbaBCDMa%2BU7b1aRv=4BJQ@mail.gmail.com> <5630E844.2080807@grosbein.net> <CAJ-VmonH%2BVfT1zUyAq=fXv6PbwQuiw1_k4CRw1yMgfm6CRaAwA@mail.gmail.com> <CAJ-VmomjWOccaaVyPrGBrf7ACL8KGGOuuFo1QWw02%2BM9smVGFA@mail.gmail.com> <56321ED9.4050602@grosbein.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Right, and this is interrupt storming?
-a
On 29 October 2015 at 09:27, Eugene Grosbein <eugen@grosbein.net> wrote:
> On 29.10.2015 06:40, Adrian Chadd wrote:
>> .. and what's your bridge config? I can setup a one-arm bridge setup
>> tonight - I've been routing between arge0<->arge1 and I should really
>> be doing arge0 between VLANs.
>
> For now, I prefer to stick with my forwarding (not bridging) setup
> because it shows interrupt storm reproduceably and this problem is more important
> than performance.
>
> Switch is configured with vlangroup0 (LAN, tag 1): all ports
> including CPU but excluding WAN, all untagged and vlangroup1 (WAN, tag 2):
> CPU port (tagged) and WAN port (untagged):
>
> #!/bin/sh
>
> cpu=0
> wan=1
> lan1=2
> lan2=3
> lan3=4
> lan4=5;
>
> lantag="1"
> wantag="2"
>
> etherswitchcfg config vlan_mode dot1q
> etherswitchcfg vlangroup0 vlan $lantag members $cpu,$lan1,$lan2,$lan3,$lan4
> etherswitchcfg vlangroup1 vlan $wantag members ${cpu}t,$wan
> etherswitchcfg port$cpu pvid $lantag
> etherswitchcfg port$lan1 pvid $lantag
> etherswitchcfg port$lan2 pvid $lantag
> etherswitchcfg port$lan3 pvid $lantag
> etherswitchcfg port$lan4 pvid $lantag
> etherswitchcfg port$wan pvid $wantag
>
> #EOF
>
> From /etc/rc.conf:
>
> # LAN
> ifconfig_arge0="inet 192.168.0.86/24"
> # WAN
> ifconfig_vlan2="inet 10.58.0.12/24 vlan 2 vlandev arge0"
>
> FTP client is 192.168.0.66, it downloads 1GB file from FTP server 10.58.0.4
>
> Here are new stats (head at r290136):
>
> dev.arge.0.tx_cnt: 126
> dev.arge.0.tx_cons: 38
> dev.arge.0.tx_prod: 36
> dev.arge.0.intr_ok: 38356
> dev.arge.0.intr_stray_intr: 0
> dev.arge.0.intr_stray_filter: 0
> dev.arge.0.tx_pkts_nosegs: 518
> dev.arge.0.tx_pkts_unaligned_len: 0
> dev.arge.0.tx_pkts_unaligned_start: 0
> dev.arge.0.tx_pkts_unaligned: 0
> dev.arge.0.tx_pkts_aligned: 345184
> dev.arge.0.intr.31: 0
> dev.arge.0.intr.30: 0
> dev.arge.0.intr.29: 0
> dev.arge.0.intr.28: 0
> dev.arge.0.intr.27: 0
> dev.arge.0.intr.26: 0
> dev.arge.0.intr.25: 0
> dev.arge.0.intr.24: 0
> dev.arge.0.intr.23: 0
> dev.arge.0.intr.22: 0
> dev.arge.0.intr.21: 0
> dev.arge.0.intr.20: 0
> dev.arge.0.intr.19: 0
> dev.arge.0.intr.18: 0
> dev.arge.0.intr.17: 0
> dev.arge.0.intr.16: 0
> dev.arge.0.intr.15: 0
> dev.arge.0.intr.14: 0
> dev.arge.0.intr.13: 0
> dev.arge.0.intr.12: 0
> dev.arge.0.intr.11: 0
> dev.arge.0.intr.10: 0
> dev.arge.0.intr.9: 0
> dev.arge.0.intr.8: 0
> dev.arge.0.intr.7: 0
> dev.arge.0.intr.6: 1
> dev.arge.0.intr.5: 0
> dev.arge.0.intr.4: 14275
> dev.arge.0.intr.3: 0
> dev.arge.0.intr.2: 0
> dev.arge.0.intr.1: 26360
> dev.arge.0.intr.0: 28596
> dev.arge.0.debug: 0
> dev.arge.0.%parent: nexus0
> dev.arge.0.%pnpinfo:
> dev.arge.0.%location:
> dev.arge.0.%driver: arge
> dev.arge.0.%desc: Atheros AR71xx built-in ethernet interface
> dev.arge.1.tx_cnt: 0
> dev.arge.1.tx_cons: 0
> dev.arge.1.tx_prod: 0
> dev.arge.1.intr_ok: 0
> dev.arge.1.intr_stray_intr: 0
> dev.arge.1.intr_stray_filter: 0
> dev.arge.1.tx_pkts_nosegs: 0
> dev.arge.1.tx_pkts_unaligned_len: 0
> dev.arge.1.tx_pkts_unaligned_start: 0
> dev.arge.1.tx_pkts_unaligned: 0
> dev.arge.1.tx_pkts_aligned: 0
> dev.arge.1.intr.31: 0
> dev.arge.1.intr.30: 0
> dev.arge.1.intr.29: 0
> dev.arge.1.intr.28: 0
> dev.arge.1.intr.27: 0
> dev.arge.1.intr.26: 0
> dev.arge.1.intr.25: 0
> dev.arge.1.intr.24: 0
> dev.arge.1.intr.23: 0
> dev.arge.1.intr.22: 0
> dev.arge.1.intr.21: 0
> dev.arge.1.intr.20: 0
> dev.arge.1.intr.19: 0
> dev.arge.1.intr.18: 0
> dev.arge.1.intr.17: 0
> dev.arge.1.intr.16: 0
> dev.arge.1.intr.15: 0
> dev.arge.1.intr.14: 0
> dev.arge.1.intr.13: 0
> dev.arge.1.intr.12: 0
> dev.arge.1.intr.11: 0
> dev.arge.1.intr.10: 0
> dev.arge.1.intr.9: 0
> dev.arge.1.intr.8: 0
> dev.arge.1.intr.7: 0
> dev.arge.1.intr.6: 0
> dev.arge.1.intr.5: 0
> dev.arge.1.intr.4: 0
> dev.arge.1.intr.3: 0
> dev.arge.1.intr.2: 0
> dev.arge.1.intr.1: 0
> dev.arge.1.intr.0: 0
> dev.arge.1.debug: 0
> dev.arge.1.%parent: nexus0
> dev.arge.1.%pnpinfo:
> dev.arge.1.%location:
> dev.arge.1.%driver: arge
> dev.arge.1.%desc: Atheros AR71xx built-in ethernet interface
> # interrupt storm detected on "int2"; throttling interrupt source
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmom1Tagn6WL-qfNZ7xqPznrLygB6JzMMJdyLU=ROybnEGA>