Date: Tue, 8 May 2007 09:19:44 +0300 From: Igor Popov <igorpopov@newmail.ru> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-gnats-submit@freebsd.org, freebsd-usb@freebsd.org Subject: Re: usb/112461: ehci USB 2.0 doesn't work on nforce4 Message-ID: <200705080919.45417.igorpopov@newmail.ru> In-Reply-To: <200705071512.50827.hselasky@c2i.net> References: <200705061151.l46Bp4e9013742@www.freebsd.org> <200705070909.08032.igorpopov@newmail.ru> <200705071512.50827.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
=D0=92 =D1=81=D0=BE=D0=BE=D0=B1=D1=89=D0=B5=D0=BD=D0=B8=D0=B8 =D0=BE=D1=82 = Monday 07 May 2007 16:12:50 Hans Petter Selasky =D0=BD=D0=B0=D0=BF=D0=B8=D1= =81=D0=B0=D0=BB(=D0=B0): > On Monday 07 May 2007 08:09, Igor Popov wrote: > > Good morning. > > > > > On Sunday 06 May 2007 13:51, Igor Popov wrote: > > > > >Number: 112461 > > > > >Category: usb > > > > >Synopsis: ehci USB 2.0 doesn't work on nforce4 > > > > >Confidential: no > > > > >Severity: non-critical > > > > >Priority: medium > > > > >Responsible: freebsd-usb > > > > >State: open > > > > >Quarter: > > > > >Keywords: > > > > >Date-Required: > > > > >Class: sw-bug > > > > >Submitter-Id: current-users > > > > >Arrival-Date: Sun May 06 12:00:11 GMT 2007 > > > > >Closed-Date: > > > > >Last-Modified: > > > > >Originator: Igor Popov > > > > >Release: 6.0, 6.1, 6.2 > > > > >Organization: > > > > >Environment: > > > > > > > > FreeBSD unix.my.net 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Sat Jan 27 > > > > 13:01:18 EET 2007 =20 > > > > toor@unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL i386 > > > > > > > > >Description: > > > > > > > > I have motherboard(Asus A8N-E) that built on nforce4 chipset, it has > > > > usb 2.0 ports, but under FreeBSD with usb 2.0 flashdrive max speed > > > > near 1.2Mb/s on file copying (my custom kernel has ehci driver), th= at > > > > is usb1.[01] speed. But under both linux an windows with the same > > > > flashdrive speed is near 10Mb/s. > > > > > > > > Copyright (c) 1992-2007 The FreeBSD Project. > > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > > > > 1994 The Regents of the University of California. All rights > > > > reserved. FreeBSD is a registered trademark of The FreeBSD > > > > Foundation. FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18 EET 2007 > > > > toor@unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL > > > > ACPI APIC Table: <Nvidia AWRDACPI> > > > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > > > CPU: AMD Athlon(tm) 64 Processor 3000+ (1809.28-MHz 686-class CPU) > > > > Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2 > > > > > > > > Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MT= RR,P > > > >GE ,M CA ,CM OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > > > > Features2=3D0x1<SSE3> > > > > AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> > > > > AMD Features2=3D0x1<LAHF> > > > > real memory =3D 536805376 (511 MB) > > > > avail memory =3D 507523072 (484 MB) > > > > ioapic0 <Version 1.1> irqs 0-23 on motherboard > > > > wlan: mac acl policy registered > > > > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, > > > > RF5413) acpi0: <Nvidia AWRDACPI> on motherboard > > > > acpi_bus_number: can't get _ADR > > > > acpi_bus_number: can't get _ADR > > > > acpi0: Power Button (fixed) > > > > acpi_bus_number: can't get _ADR > > > > acpi_bus_number: can't get _ADR > > > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on > > > > acpi0 cpu0: <ACPI CPU> on acpi0 > > > > acpi_button0: <Power Button> on acpi0 > > > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > > > pci0: <ACPI PCI bus> on pcib0 > > > > pci0: <memory> at device 0.0 (no driver attached) > > > > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > > > > isa0: <ISA bus> on isab0 > > > > nfsmb0: <nForce2/3/4 MCP SMBus Controller> port > > > > 0xe400-0xe41f,0x4c00-0x4c3f,0x4c 40-0x4c7f irq 20 at device 1.1 on > > > > pci0 smbus0: <System Management Bus> on nfsmb0 > > > > smb0: <SMBus generic I/O> on smbus0 > > > > nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0 > > > > smbus1: <System Management Bus> on nfsmb1 > > > > smb1: <SMBus generic I/O> on smbus1 > > > > ohci0: <OHCI (generic) USB controller> mem 0xd3104000-0xd3104fff irq > > > > 21 at devic e 2.0 on pci0 > > > > ohci0: [GIANT-LOCKED] > > > > usb0: OHCI version 1.0, legacy support > > > > usb0: <OHCI (generic) USB controller> on ohci0 > > > > usb0: USB revision 1.0 > > > > uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > > uhub0: 10 ports with 10 removable, self powered > > > > ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff > > > > irq 22 at d evice 2.1 on pci0 > > > > ehci0: [GIANT-LOCKED] > > > > usb1: EHCI version 1.0 > > > > usb1: companion controller, 4 ports each: usb0 > > > > usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 > > > > usb1: USB revision 2.0 > > > > uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > > > > uhub1: 10 ports with 10 removable, self powered > > > > pcm0: <nVidia nForce4> port 0xdc00-0xdcff,0xe000-0xe0ff mem > > > > 0xd3103000-0xd3103ff f irq 23 at device 4.0 on pci0 > > > > pcm0: <Avance Logic ALC850 AC97 Codec> > > > > atapci0: <nVidia nForce CK804 UDMA133 controller> port > > > > 0x1f0-0x1f7,0x3f6,0x170-0 x177,0x376,0xf000-0xf00f at device 6.0 on > > > > pci0 ata0: <ATA channel 0> on atapci0 > > > > ata1: <ATA channel 1> on atapci0 > > > > atapci1: <nVidia nForce CK804 SATA300 controller> port > > > > 0x9f0-0x9f7,0xbf0-0xbf3,0 x970-0x977,0xb70-0xb73,0xd800-0xd80f mem > > > > 0xd3102000-0xd3102fff irq 21 at device 7.0 on pci0 > > > > ata2: <ATA channel 0> on atapci1 > > > > ata3: <ATA channel 1> on atapci1 > > > > atapci2: <nVidia nForce CK804 SATA300 controller> port > > > > 0x9e0-0x9e7,0xbe0-0xbe3,0 x960-0x967,0xb60-0xb63,0xc400-0xc40f mem > > > > 0xd3101000-0xd3101fff irq 22 at device 8.0 on pci0 > > > > ata4: <ATA channel 0> on atapci2 > > > > ata5: <ATA channel 1> on atapci2 > > > > pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 > > > > pci5: <ACPI PCI bus> on pcib1 > > > > ath0: <Atheros 5212> mem 0xd3000000-0xd300ffff irq 16 at device 6.0 > > > > on pci5 ath0: Ethernet address: 00:15:e9:a4:58:9b > > > > ath0: mac 7.9 phy 4.5 radio 5.6 > > > > nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port > > > > 0xb000-0xb007 mem 0xd3 100000-0xd3100fff irq 23 at device 10.0 on > > > > pci0 > > > > miibus0: <MII bus> on nfe0 > > > > e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0 > > > > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > > > > 1000baseTX-FDX, auto nfe0: Ethernet address: 00:17:31:13:8d:3f > > > > nfe0: [FAST] > > > > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > > > > pci4: <ACPI PCI bus> on pcib2 > > > > pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > > > > pci3: <ACPI PCI bus> on pcib3 > > > > pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 > > > > pci2: <ACPI PCI bus> on pcib4 > > > > pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 > > > > pci1: <ACPI PCI bus> on pcib5 > > > > nvidia0: <GeForce 7900 GT/GTO> port 0xa000-0xa07f mem > > > > 0xd0000000-0xd0ffffff,0xc0 000000-0xcfffffff,0xd1000000-0xd1ffffff > > > > irq 18 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] > > > > acpi_tz0: <Thermal Zone> on acpi0 > > > > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 = on > > > > acpi0 fdc0: [FAST] > > > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 > > > > on acpi0 sio0: type 16550A > > > > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on > > > > acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > > > > ppbus0: <Parallel port bus> on ppc0 > > > > lpt0: <Printer> on ppbus0 > > > > lpt0: Interrupt-driven port > > > > ppi0: <Parallel I/O> on ppbus0 > > > > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > > > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > > > atkbd0: [GIANT-LOCKED] > > > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > > > psm0: [GIANT-LOCKED] > > > > psm0: model IntelliMouse, device ID 3 > > > > pmtimer0 on isa0 > > > > sc0: <System console> at flags 0x100 on isa0 > > > > sc0: VGA <16 virtual consoles, flags=3D0x300> > > > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > > > sio1: port may not be enabled > > > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > > > > isa0 Timecounter "TSC" frequency 1809282513 Hz quality 800 > > > > Timecounters tick every 1.000 msec > > > > ad0: 238475MB <HDS722525VLAT80 V36OA6MA> at ata0-master UDMA100 > > > > acd0: DVDR <ASUS DRW-1608P/1.59> at ata1-master UDMA66 > > > > ad1: 190782MB <Seagate ST3200822AS 3.01> at ata5-master SATA150 > > > > Trying to mount root from ufs:/dev/ad0s2a > > > > ath0: link state changed to UP > > > > nfe0: link state changed to UP > > > > umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2 > > > > da0 at umass-sim0 bus 0 target 0 lun 0 > > > > da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device > > > > da0: 40.000MB/s transfers > > > > da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C) > > > > > > This is maybe a SCSI problem. > > > > > > If you install the new USB stack [the SVN version], see: > > > > > > http://www.turbocat.net/~hselasky/usb4bsd > > > > > > Then try to copy some files and turn on debugging: > > > > > > sysctl hw.usb.umass.debug=3D-1 > > > > > > You might get a lot of messages. Look for errors. > > > > No, it is standard kernel from RELENG_6_2 branch, usb stack is not > > modified. > > You have to compile a new USB kernel with "options USB_DEBUG". My new USB > stack has that flag set by default. > =20 Recompiled kernel with makeoptions DEBUG=3D-DUSB_DEBUG # sysctl hw.usb hw.usb.ehci.debug: 1 hw.usb.ohci.debug: 1 hw.usb.ugen.debug: 1 hw.usb.uhci.debug: 1 hw.usb.uhci.loop: 0 hw.usb.uhid.debug: 0 hw.usb.uhub.debug: 0 hw.usb.ukbd.debug: 0 hw.usb.ulpt.debug: 0 hw.usb.umass.debug: 1 hw.usb.ums.debug: 0 hw.usb.debug: 1 ehci_pcd: change=3D0x02 ehci after reset, status=3D0x00001005 ehci port 1 reset, status =3D 0x00001005 usbd_new_device bus=3D0xc3b51000 port=3D1 depth=3D1 speed=3D3 usbd_new_device: adding unit addr=3D2, rev=3D200, class=3D0, subclass=3D0, = protocol=3D0,=20 maxpacket=3D64, len=3D18, speed=3D3 usbd_new_device: new dev (addr 2), dev=3D0xc4c35900, parent=3D0xc3b3f900 usbd_probe_and_attach: trying device specific drivers usbd_probe_and_attach: no device specific driver found usbd_probe_and_attach: looping over 1 configurations usbd_set_config_index: (addr 1) cno=3D2 attr=3D0x80, selfpowered=3D0, power= =3D98 usbd_set_config_index: set config 1 umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2 umass0: SCSI over Bulk-Only; quirks =3D 0x0000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C) umass0: BBB reset failed, IOERROR ehci_device_clear_toggle: epipe=3D0xc4c35180 status=3D0x80008d00 usbd_dump_pipe: pipe=3D0xc4c35180 usbd_dump_iface: iface=3D0xc40bb020 device=3D0xc4c35900 idesc=3D0xc433fe09 index=3D0 altindex=3D0 priv=3D0 usbd_dump_device: dev=3D0xc4c35900 bus=3D0xc3b51000 default_pipe=3D0xc4c35800 address=3D2 config=3D1 depth=3D1 speed=3D3 self_powered=3D0 power=3D98 lang= id=3D1033 usbd_dump_endpoint: endp=3D0xc3d12dcc edesc=3D0xc433fe19 refcnt=3D1 bEndpointAddress=3D0x82 (usbd_dump_pipe:) refcnt=3D1 running=3D0 aborting=3D0 intrxfer=3D0, repeat=3D0, interval=3D-1 umass0: BBB bulk-in clear stall failed, IOERROR ehci_device_clear_toggle: epipe=3D0xc4c35000 status=3D0x801f8049 usbd_dump_pipe: pipe=3D0xc4c35000 usbd_dump_iface: iface=3D0xc40bb020 device=3D0xc4c35900 idesc=3D0xc433fe09 index=3D0 altindex=3D0 priv=3D0 usbd_dump_device: dev=3D0xc4c35900 bus=3D0xc3b51000 default_pipe=3D0xc4c35800 address=3D2 config=3D1 depth=3D1 speed=3D3 self_powered=3D0 power=3D98 lang= id=3D1033 usbd_dump_endpoint: endp=3D0xc3d12dc0 edesc=3D0xc433fe12 refcnt=3D1 bEndpointAddress=3D0x01 (usbd_dump_pipe:) refcnt=3D1 running=3D0 aborting=3D0 intrxfer=3D0, repeat=3D0, interval=3D-1 umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR ehci_device_clear_toggle: epipe=3D0xc4c35180 status=3D0x8d00 usbd_dump_pipe: pipe=3D0xc4c35180 usbd_dump_iface: iface=3D0xc40bb020 device=3D0xc4c35900 idesc=3D0xc433fe09 index=3D0 altindex=3D0 priv=3D0 usbd_dump_device: dev=3D0xc4c35900 bus=3D0xc3b51000 default_pipe=3D0xc4c35800 address=3D2 config=3D1 depth=3D1 speed=3D3 self_powered=3D0 power=3D98 lang= id=3D1033 usbd_dump_endpoint: endp=3D0xc3d12dcc edesc=3D0xc433fe19 refcnt=3D1 bEndpointAddress=3D0x82 (usbd_dump_pipe:) refcnt=3D1 running=3D0 aborting=3D0 IOERROR on mount, so I have to turn of debug, unplug and plug usbdrive, mou= nt=20 it and turn on debug. On file copying there were no kernel messages. =2D-=20 If it heals good, say it.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705080919.45417.igorpopov>