Date: Fri, 21 Feb 2003 18:19:59 +1100 From: "Alastair G. Hogge" <agh@tpg.com.au> To: freebsd-current@freebsd.org Subject: Recent CVSup on a P4S8X mainboard. Message-ID: <200302211819.59794.agh@tpg.com.au>
next in thread | raw e-mail | index | archive | help
Hello list,
I've been using Current for some time now, and have in the last 2 or so weeks
updated my box a little. I installed an ASUS P4S8X main board with all the
options. Most things were running fine until today..my most recent CVSup.
I think it may be the audio that causing my problem....
I now have no sound from my SBLive. I've tried disabling the Sigmatel AC97
chip thru the BIOS, but this changes nothing.
Everytime I try to play something I get a constant beep. And kernel messages
of "pcm0: pci error"
<my dmesg>
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Fri Feb 21 16:27:46 EST 2003
agh@nova:/usr/obj/usr/src/sys/NOVA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04df000.
Preloaded elf module "/boot/kernel/if_ppp.ko" at 0xc04df0a8.
Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc04df154.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04df200.
Preloaded elf module "/boot/kernel/if_rl.ko" at 0xc04df2ac.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04df358.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc04df404.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc04df4b4.
Preloaded elf module "/boot/kernel/uhid.ko" at 0xc04df560.
Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc04df60c.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04df6b8.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc04df760.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc04df80c.
Preloaded elf module "/boot/kernel/atspeaker.ko" at 0xc04df8b4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04df964.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2533060308 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2533.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536854528 (511 MB)
avail memory = 516120576 (492 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S8X > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f1720
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0
on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, FireWire> at device 2.3 (no driver attached)
atapci0: <SiS 963 UDMA133 controller> port
0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 irq 11
at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xce000000-0xce000fff irq 9 at device 3.0
on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcd800000-0xcd800fff irq 9 at device 3.1
on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xcd000000-0xcd000fff irq 9 at device 3.2
on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr 2,
iclass 3/1
ums0: 5 buttons and Z dir.
pci0: <serial bus, USB> at device 3.3 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0x8400-0x841f irq 5 at device 10.0 on pci0
pcm0: <SigmaTel STAC9708/9711 ac97 codec>
atapci1: <Promise SATA UDMA133 controller> port
0x7000-0x707f,0x7400-0x740f,0x7800-0x783f mem
0xcb000000-0xcb01ffff,0xcb800000-0xcb800fff irq 11 at device 14.0 on pci0
atapci1: Busmastering DMA not configured
ata2: at 0x7800 on atapci1
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA133
acd0: CD-RW <SONY CD-RW CRX175E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
/home: mount pending error: blocks 416 files 2
/home: superblock summary recomputed
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /var/tmp was not properly dismounted
ppp0: bad fcs 3b1c, pkt len 37
ppp0: bad fcs 5264, pkt len 5
ppp0: no compressor for [15 3 29], 3
ppp0: no compressor for [1a 4 8], 4
ppp0: no compressor for [18 4 8], 4
ppp0: no compressor for [15 3 29], 3
ppp0: no compressor for [1a 4 8], 4
ppp0: no compressor for [18 4 8], 4
ppp0: no compressor for [1a 4 78], 4
ppp0: no compressor for [18 4 78], 4
ppp0: no compressor for [15 3 2f], 3
pcm0: pci error
pcm0: pci error
....
</my dmesg>
Whilest I'm at it. On my old mb that didn't have ACPI I used apm and the
command "shutdown -p now" to power down the box...this no longer works. Is
there an ACPI version or some such?
Also is there a list of kernel modules that correspond to the kernel config
file? I'm having trouble figuring out what some kernel devices/options are as
modules.
Thanks in advance
-Alastair
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200302211819.59794.agh>