Date: Mon, 1 Nov 1999 17:44:41 +1100 (EST) From: Nick Slager <nicks@albury.net.au> To: freebsd-mobile@freebsd.org Subject: New Media Bus Toaster PCMCIA SCSI card Message-ID: <Pine.BSF.4.10.9911011730200.6406-100000@tarial.albury.net.au>
next in thread | raw e-mail | index | archive | help
Greetings,
I'm currently wrestling with the above card and getting absolutely
nowhere.
It's in a Dell Inspiron 7000 (which works fine PCMCIA-wise), running
3.3-RELEASE.
According to the (sparse) docs I have found, the card is meant to be
compatible with the Adaptec 152x series; therefore (I think) it should be
supported with the aic driver.
The card is reported to work with BSD/OS, NetBSD and various flavors of
Linux. PAO under 2.2.8 reportedly supports it, but it appears PAO no
longer supports SCSI devices in 3.x.
What have I missed? Anyone have any bright ideas, or have this working in
a machine running 3.x?
[dumpcis output below]
Thanks,
Nick.
---
From a Sun Microsystems bug report (#4102680):
"Workaround: don't pound on the mouse like a wild monkey."
dumpcis output:
_____________________________
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: d1 ff
Common memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 250nS, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 30
000: 04 01 4e 65 77 20 4d 65 64 69 61 00 53 43 53 49
010: 00 42 75 73 20 54 6f 61 73 74 65 72 00 ff
Version = 4.1, Manuf = [New Media],card vers = [SCSI]
Addit. info = [Bus Toaster],[^?]
Tuple #3, code = 0x1a (Configuration map), length = 6
000: 01 22 00 01 01 ff
Reg len = 2, config register addr = 0x100, last config = 0x22
Registers: X-------
Tuple #4, code = 0x1b (Configuration entry), length = 14
000: e0 01 19 39 55 3d 86 3c 26 45 30 ff ff ff
Config index = 0x20(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 10mA
Max current average over 1 second: 1 x 100mA, ext = 0x3c
Max current average over 10 ms: 2 x 100mA
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes: Pulse
IRQ level = 5
Tuple #5, code = 0x1b (Configuration entry), length = 8
000: 21 08 ca 60 40 01 1f ff
Config index = 0x21
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x140 block length = 0x20
Tuple #6, code = 0x1b (Configuration entry), length = 8
000: 22 08 ca 60 40 03 1f ff
Config index = 0x22
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
Tuple #7, code = 0x0 (Null tuple), length = 5
000: 57 00 02 d3 ff
Tuple #8, code = 0x21 (Functional ID), length = 3
000: 00 00 ff
Multifunction card
Tuple #9, code = 0xff (Terminator), length = 0
----------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9911011730200.6406-100000>